ViTiny UM08-CSZ064 Manuale utente
Version 1.1A
UM08-CSZ064
User’s Guide
1
Contents
1. Product Introduction ...........................2
1.1 Packing Contents .........................2
1.2 CSZ064 Lens Assembling .............2
1.3 IR Remote controller....................5
1.4 Microscope menu functions........8
1.5 Microscope introduction: ..........22
1.6 Microscope Focus ......................27
1.7 Microscope accessory................29
2. Printed Notice....................................29
2.1 Maintenance..............................29
2.2 Product Specification.................30
2
1. Product Introduction
1.1 Packing Contents
The box contains 1 camera and 9 accessories.
Item
Q’ty
Item
Q’ty
Microscope Camera
1
White Balance Card
1
HDMI Cable
1
IR Remote Control
1
Power adaptor
1
User’s Guide
1
S114 Stand
1
CSZ064 Lens
1
Stand assemble guide
1
LED Ring Light GN03
1
1.2 CSZ064 Lens Assembling
1.2.1 Fix microscope
Each CSZ064 lens has reach its parfocal distance when goods ship
out; simply screw ○athe CSZ064 lens under the microscope camera
and tighten up with stand○
b,refer to 1.5.3 section for assembling.
3
1.2.2 Start to use microscope
Connect the HDMI cable ○
cand adaptor ○
dwithin the box
to HDMI monitor and power. See below:
○
a
○
b
4
1.2.3 Power On/Off
Press Power to turn on microscope. Choose HDMI mode or
Auto on HDMI monitor to output image.
○
c
○
d
5
1.3 IR Remote controller
The microscope operation and
functions is controlled by the IR
remote controller.
(1) Power ：Turn on/off.
(2) HDMI ：No Function.
(3) PC CAM ：No Function.
(4) Snapshot ：No Function.
Only when connect to optional
accessory Image Capture Box
IMB05 for snapshot.
(5) LED Adjustment: No Function
(6) Motor Reset (Recalibrates
entire operation)：Returns to
the lens position. If a loss of
electricity occurred during operation, please reset the
operation.
(7) Manual focus: Press Zoom out till the end to set up the
sensor motor at the top, so that all optical objectives lens
reach the parfocal distance.
6
(7-1)Zoom in ：Zooms in; speed increases when held.
(7-2)Zoom out ：Zooms out; speed increases when held.
(8) Autofocus: Does not suggest to use this function in CSZ064
model. Whenever active the AF function, sensor position will
change. This might cause the sensor position not at the end so
image will not clear in every stage when manual adjust. If this
situation occurs, please refer to Section 1.6 Microscope Focus.
Press button one time to search focus in current area, press and
hold button for 2 seconds to search focus in whole area.
(8-1) Single Autofocus : Focuses one time.
(8-2) Continuous Autofocus :Re-focuses when image blurred.
(9) Exposure Value: 18 levels of exposure value are selectable,
from -9~Auto~+9.
(9-1)Increase ：Use to increase exposure when the image is
too dark.
(9-2)Decrease ：Use to decrease exposure when the image is
too bright.
(10)Menu on Screen ：Open/close menu for setting. Refer to
Section 1.4.
(11)Up ：Choose the previous item
7
(12)Down ：Choose the next item
(13)Left ：Choose the next value
(14)Right ：Choose the last value
(15)Video Ratio ：No Function
(16)Status Bar ：Status bar show [FL] for free lens. By switching
the Status bar, it will show OZ (sensor position), and EV
(Exposure). Each status only shows up 3 seconds.
(17)Auto White Balance Calibration : To calibrate the white
balance, place the white balance card (included in box) under
the lens, focus until clear, and choose On. Because the white
balance is sometimes influenced by external light sources, it is
recommended to calibrate the white balance if the color
seems off or incorrect.
8
(18)Image Freeze : ON/Off to freeze or unfreeze the image.
(19)Sharpness : On/Off to set sharpness at Minimum and
Maximum level.
1.4 Microscope menu functions
There are 8 functions in menu, press Up and Down to
choose item, Left and Right to turn on/off or adjust
parameter. Enter means more functions, press Menu to
enter next function or confirm. means no more settings.
Return to return last page, or press Left or Right to choose
“End” to return preview window.
9
1.4.1 EXPOSURE
To set exposure time, see below:
(1) Shutter: Digitally control amount of light, the amount is
smaller the image is darker and the frame rate is also
slower.
(2) AGC (Auto Gain Control): auto control the brightness based
on setting when light is not enough.
(3) SENS-UP：Only available when item (2) AGC value is larger
than 0, use to increase Senor to light’s sensibility.
(4) Brightness Adjust image brightness.
(5) D-WDR: Digital-wide dynamic range. Digitally adjusting
exposure in areas of the frame to maintain optimum detail
in both the shadows and highlights of the image.
Indice
Altri manuali ViTiny Microscopio
ViTiny
ViTiny VT300 PLUS Manuale utente
ViTiny
ViTiny VT300-O Manuale utente
ViTiny
ViTiny UM20-GN08 Manuale utente
ViTiny
ViTiny PRO10 Manuale utente
ViTiny
ViTiny UM20-CSZ1236 Manuale utente
ViTiny
ViTiny UM5-CAM Manuale utente
ViTiny
ViTiny VT101 Manuale utente
ViTiny
ViTiny PRO10 Manuale utente
ViTiny
ViTiny UM20-GN Manuale utente
ViTiny
ViTiny UM08 Manuale utente
ViTiny
ViTiny Fun 50 Manuale utente
ViTiny
ViTiny UM08-CSZ1236 Manuale utente
ViTiny
ViTiny UM12 Manuale utente
ViTiny
ViTiny UM20A-CSZ064C Manuale utente
ViTiny
ViTiny UM20B-CSZ064 Manuale utente
ViTiny
ViTiny VT101 Manuale utente
ViTiny
ViTiny VT300 Manuale utente
ViTiny
ViTiny UM06-CSZ064C Manuale utente
ViTiny
ViTiny DiGi UM20 Manuale utente
ViTiny
ViTiny UM20B-CSZ064C Manuale utente
