ViTiny DiGi UM20 Manuale utente
Version 1.0A
UM20 User’s Guide
DiGi Microscope
1
Contents
1. Product Introduction ...........................2
1.1 Packing Contents .........................2
1.2 Assemble microscope with stand 2
1.3 IR Remote controller....................4
1.4 Microscope menu functions......10
1.5 Microscope introduction: ..........23
1.6 Microscope Focus......................26
1.7 Microscope accessory................30
2. Printed Notice....................................31
2.1 Maintenance..............................31
2.2 Product Specification.................32
2.3 Safety Instructions.....................33
2
1. Product Introduction
1.1 Packing Contents
The box contains microscope and accessories. The Object Lens 4X
is already assembled onto microscope.
Item
Q’ty
Item
Q’ty
DiGi Microscope
1
White Balance Card
1
HDMI Cable
1
IR Remote Control
1
USB-C 3.0 Cable
1
User’s Guide
1
Power adaptor
1
Calibrator
1
S107 Stand
1
Object Lens 4x
1
Stand assemble guide
1
Object Lens 10x
Option
Software download:
http://www.vitiny.com/vitiny_en/ap_program.html
1.2 Assemble microscope with stand
1.2.1 Fix microscope
Tighten the microscope onto stand○
a. Refer to Stand
assembling instruction for detailed explanation.
3
1.2.2 Start to use microscope
Connect the HDMI cable○
band adaptor○
cto HDMI monitor
and power. See below:
1.2.3 Power On/Off
Press Power to turn on microscope. Choose HDMI
○
a
○
b
○
c
4
mode or Auto on HDMI monitor to output image. *Long
press means press and hold the button for 2 seconds*
1.3 IR Remote controller
The microscope operation and functions is controlled by the IR
remote controller.
(1) Power ：Turn on/off.
(2) HDMI ：When in HDMI mode, the HDMI cable must
connect with the screen and microscope.
(3) PC CAM ：When in PC CAM mode, the USB cable must
connect to a PC and microscope. Please disable software
before switching to HDMI mode or powering off.
5
(4) Snapshot ：When preview on
PCCam mode, press snapshot to
take picture.
(5) LED Adjustment: 12 levels of
brightness.
(5-1) Increase ：Increase LED
brightness.
(5-2) Decrease ：Decrease
LED brightness.
(5-3) On/Off ：Turn the LED
on/off. When turn on the
LED, the brightness will
return to the situation
before turn off.
(6) Motor Reset (Recalibrates entire operation)：Returns to the
lens position. If a loss of electricity occurred during operation,
please reset the operation.
(7) Manual focus
(7-1) Zoom in ：Zooms in; speed increases when held.
(7-2) Zoom out ：Zooms out; speed increases when held.
(7-3) Step zoom in ：zoom in by steps.
(7-4) Step zoom out ：zoom out by steps.
6
(8) Autofocus: Press one time to search focus in current area, long
press for 2 seconds to search focus in whole area.
(8-1) Single Autofocus : Focuses one time.
(8-2) Continuous Autofocus :Re-focuses when image blurred.
(9) Exposure Value: 20 levels of exposure value are selectable, from -
10~Auto~+9.
(9-1) Increase ：Use to increase exposure when the image
is too dark.
(9-2) Decrease ：Use to decrease exposure when the
image is too bright.
(10) Menu on Screen ：Open/close menu for setting. Refer to
Section 1.4.
(11) Up ：Choose the previous item, if Crosshair is ON, select
other color.
(12) Down ：Choose the next item, if Crosshair is ON, select other
color.
(13) Left ：Choose the next value, if Crosshair is ON, select Line
Size.
(14) Right ：Choose the last value. When MENU function is not
turn on, press to change Crosshair in Full screen size, normal
size or turn off.
(15) Video Ratio ：No Function.
7
(16) Status Bar ：Status bar tells Field of View (FOV),
Magnification (MAG), and Working Distance (WD) or ON/OFF
the status, see area ○d. The area○e tells the operation status
and only show 3 seconds.
If see [FL], for free lens such as 4x long focus lens or CSZ-series.
It will disable the LED light and show only OZ (sensor position),
and EV (Exposure). Longer press the Status Button to switch to
standard 4X/10X lens mode.
(16-1) Area○
d：
(16-1-1) FOV：Field of View (FOV) display image on the
effective horizontal size of screen.
(16-1-2) MAG：(Magnification) The magnification size will
change depending on the lens position, screen size,
and image ratio.
○
d
○
e
8
(16-1-3) WD: Working Distance.
(16-2) Area○e：
(16-2-1) OZ：Optical Zoom. Ex: OZ：500.
500means sensor position.
(16-2-2) SZ：Step Zoom. Ex :SZ : 500. Same format as OZ.
(16-2-3) AFS：Single Autofocus. Ex: AFS►A500, “A”means
search focus in “current area”, 500 means sensor
position. AFS►W500, “W”means search focus in
“whole area”.
(16-2-4) AFC：Continuous autofocus, “A”and “W”are same
function as AFS.
(16-2-5) LED：LED levels. Ex: LED：12, 12 means the LED
level.
(16-2-6) EV：Exposure Value. Ex: EV：+5, means EV is +5,
EV：-5 means EV is -5.
(16-2-7) MR：Motor Reset.
(16-2-8) SHA：Sharpness. Ex: SHA►SET(5), means
sharpness
is 5. SHA►SET(10) means the maximum 10.
(16-2-9) FRZ：Image Freeze. Ex: FRZ►ON, means freeze
image, FRZ►OFF means unfreeze image.
(16-2-10) WB：White Balance Calibration. Ex: WB►SET
Indice
Altri manuali ViTiny Microscopio
ViTiny
ViTiny UM20A-CSZ064 Manuale utente
ViTiny
ViTiny VT101 Manuale utente
ViTiny
ViTiny VT300 PLUS Manuale utente
ViTiny
ViTiny VT101 Manuale utente
ViTiny
ViTiny UM30 Manuale utente
ViTiny
ViTiny UM20-CSZ1236 Manuale utente
ViTiny
ViTiny UM20-CSZ064 Manuale utente
ViTiny
ViTiny VT101 Manuale utente
ViTiny
ViTiny UM08B-CSZ064 Manuale utente
ViTiny
ViTiny UM08-CSZ1236 Manuale utente
ViTiny
ViTiny UM08B-CSZ064C Manuale utente
ViTiny
ViTiny UM08A-CSZ064 Manuale utente
ViTiny
ViTiny UM08D-CSZ064 Manuale utente
ViTiny
ViTiny UM-CAM Manuale utente
ViTiny
ViTiny UM06-CSZ064C Manuale utente
ViTiny
ViTiny UM08-GN Manuale utente
ViTiny
ViTiny UM12 Manuale utente
ViTiny
ViTiny VT300-O Manuale utente
ViTiny
ViTiny UM20B-CSZ064C Manuale utente
ViTiny
ViTiny PRO10 Manuale utente
