Vivitar ANC-FD Manuale utente
WIRELESS
HEADPHONES
User’s Manual: ANC-FD
TECHNOLOGY
Important Safety Precautions
When using your Wireless Headphones (with Active Noise Canceling Technology), basic safety precautions should
always be followed, including:
1. READ ALL INSTRUCTIONS BEFORE USING YOUR HEADPHONES.
2. Do not submerge your headphones in water or place on wet surfaces.
3. Do not allow children to play with your headphones without adult supervision. Keep out of reach from infants.
4. Do not expose your headphones to excessive heat, flames, or fire.
5. Always press all buttons carefully. Do not manhandle your headphones.
6. Do not use in extremely dry environments, as this can lead to static discharge during usage.
7. Do not expose your headphones to temperatures above 104°F/ 40°C. Keep out of direct sunlight.
8. Do not attempt to repair this product yourself. Contact a qualified service center if your headphones are in need
of service.
9. Do not drop, throw, crush, or expose your headphones to excessive physical trauma.
10. Your headphones are not intended for commercial use.
11. Do not place near objects that generate a strong magnetic field.
12. Please recycle or dispose of your speaker properly based on the laws and rules of your municipality. Contact
local recycling facilities and/or the manufacturer of your speaker for further information.
°°
BATTERY WARNING:
-The device is equipped with an integrated lithium ion battery. The battery cannot be
replaced. Do not attempt to remove the battery from the device.
-Do not dispose of in fire or expose to excessive heat.
-Do not crush, puncture, incinerate, or short circuit external contacts.
-Please recycle or dispose of the battery properly. Contact your local recycling
facilities and/or the manufacturer for further information.
CAUTION
Introduction
Thank you for purchasing the Vivitar Wireless Headphones (with Active Noise Canceling Technology), item
ANC-FD. You can use your headphones with most smartphones and Bluetooth devices to stream music and enjoy
hands-free calling. In addition, the active noise canceling feature will keep out unwanted background noise.
Please read this manual carefully to get the best results.
Package Contents
- Vivitar Wireless Headphones (with Active Noise Canceling Technology)
- Micro USB Charging Cable
- 3.5mm Aux Cable
- User’s Manual with Warranty Information
Specifications
Bluetooth Range: Up to 33 Feet (10 Meters)
Charging Input: DC 5V
Battery Type: Lithium Ion Polymer Battery
Charge Time: Approximately 2 Hours
Play Time: Approximately 8-10 Hours*
*Applicable at 50% of maximum volume. Results will be lower when volume is higher.
A Quick Look: Device Controls
LED
Indicator
Aux
Port
Micro USB
Port
Noise
Cancellation
Switch
Volume Down/
Previous Track
Volume Up/
Next Track
Play/ Pause
Button
ON OFF
- +
Charging
(red) = Charging
(off) = Charging Complete
NOTES:
-- Charging can take approximately two hours to complete when
the battery is fully drained.
-- Remove the charging cable once charging is complete.
-- Overcharging could reduce the life of the battery.
-- A charged battery will lose its capacity if it is not used on a
regular basis.
Important: To avoid a complete discharge of the battery, charge
your headphones at least once every six months.
1. The USB charging cable has a Micro USB
plug and a standard USB plug.
2. Insert the USB charging cable’s Micro USB
plug into the charging port on your
headphones.
Micro USB
Plug
USB
Plug
3. Insert the USB charging cable’s standard
USB plug into the USB port of a computer
or suitable USB charging adapter.
4. The LED Indicator light will turn red while the headphones
are charging. When charging is complete the light will turn off.
Bluetooth Pairing
1. Press and hold the Play/ Pause button for 1-2 seconds
to turn your headphones ON.
3. Go to the Bluetooth settings menu on your phone.
Make sure Bluetooth is turned on. Connect to the
available device listed as “ANC Headphone”.
2. The LED Indicator will alternately flash red and blue
to indicate your headphones are in pairing mode.
4. The LED Indicator will turn solid blue to indicate your
headphones are paired with your phone.
PRESS
& HOLD
Pairing Mode
Red and Blue:Flashing
Paired
Blue: Solid
ON OFF
- +
ANC Headphone
Available device
Using Your Headphones
Play/Pause Volume Down/
Previous Track
Volume Up/
Next Track
2. Press the Play/Pause button to play a track.
Press the button again to pause a track.
3. Press the button to decrease
volume. Press and hold to go to previous
track.
Press the button to increase volume.
Press and hold to go back to the next
track.
6. Slide the Noise Cancellation Switch left
and right to turn the feature on or off. The
LED Indicator will turn green when turned
ON.
4. Press the Play/Pause button to answer a
phone call. Press the button again to end
the call.
Double press the Play/ Pause button to
redial a number.
Answer Call/ End Call/ Redial
PRESS & HOLD
PRESS & HOLD
1. Press and hold the Play/Pause button
for 1-2 seconds to turn your headphones
ON and OFF.
5. Press and hold the Play/ Pause button to
decline an incoming call.
Decline Call Noise
Cancellation
-
ON OFF
- +
ON OFF
- +
ON OFF
- +
+
ON OFF
- +
ON OFF
- +
-+
ON OFF
- +
Maintenance and Care
- Before using your headphones, examine the ear cups to make sure that they are clean. Similarly, inspect any
ports on your headphones to make sure that they are clear of dust and debris before charging.
- Use a soft cloth or paper towel to clean your headphones.
- When cleaning, do not allow moisture to remain inside the ear cups over long periods of time.
- When cleaning, never use any harsh chemicals or detergents for cleaning. Make sure your headphones are dry
before charging.
- Always store your headphones in a cool, dry place.
- Never tug or yank on the Micro USB cable while it is connected to your headphones. Connect and disconnect
cables as carefully as possible.
- Please recycle or dispose of your headphones properly based on the laws and rules of your municipality. Contact
local recycling facilities and/or the manufacturer of your headphones for further information.
FCC Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Vivitar One Year Warranty
This warranty covers the original consumer purchaser only and is not transferable.
This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material
or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions
from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or
accident.
To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 or visit our website at www.vivitar.com.
To receive warranty service along with the name and address of an authorized product service center, the original
consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the
form of a bill of sale or receipted invoice, evidencing that the product is within the applicable warranty period(s),
MUST be presented in order to obtain the requested service. It is your responsibility to properly package and
send any defective products along with a dated copy of proof of purchase, a written explanation of the problem,
and a valid return address to the authorized service center at your expense. Do not include any other items or
accessories with the defective product. Any products received by the authorized service center that are not
covered by warranty will be returned unrepaired.
Indice
Altri manuali Vivitar Cuffie senza fili
