Vivo STAND-SIT1D Manuale utente

Sit to Stand Single Monitor Desk Mount Workstation

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-sit1d

SKU: STAND-SIT1D

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

WARNING!

A (x1)

Arm

B(x1)

Pole

C(x1)

Tray Pole

O(x1)

Holder

P(x1)

Top Cable Clip

N(x1)

Grommet

J (x1)

Support Plate

K (x1)

Decorative Cover

L (x1)

Clamp

M (x1)

Protective Pad

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

D(x1)

Upper Tray

E(x1)

Lower Tray

F (x1)

Bumper

G(x1)

Mount

H (x1)

VESA Plate

I (x1)

Thumbscrew

R(x1)

Lower Cable Clip

Q(x2)

Bracket

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

M-A (x4)

M4x12

M-D (x4)

M5x16

M-C (x4)

M5x12

M-B (x4)

M4x16

M-E (x4)

D5 Washer

M-F (x4)

Spacer

T (x3)

Flat Head Bolt

S(x15)

Bolt

U(x2)

Nut

W(x2)

Plastic Washer

V(x2)

Steel Washer

Y (x2)

Rubber Pad

X(x2)

Washer

Z(x1)

Wrench

B1 (x1)

6mm Allen Wrench

A1 (x1)

4mm Allen Wrench

ASSEMBLY STEPS

STEP 1

TOOLS NEEDED

Phillips

Screwdriver

OPTION A: Clamp Installation

Loosen clamp bolts in clamp (L) using 6mm Allen wrench (B1). Slide decorative cover (K) onto pole

(B). Attach pole to clamp using flat head bolts (T) and tighten with 4mm Allen wrench (A1), then slide

decorative cover down onto clamp. Apply protective pad (M) to bottom of clamp base. Place support

plate (J) onto clamp bolts, place clamp with pole onto desk, and tighten clamp bolts evenly using

6mm Allen wrench. Attach cable management clip (R) to pole. If needed, change clamp height by

removing bolts from the back of the clamp, then reattach at alternate height.

OPTION B: Grommet Installation

Attach grommet base (N) to pole (B) using flat

head bolts (T) and tighten with 4mm Allen wrench

(A1). Cut end from protective pad (M), and apply

remaining circular pad to bottom of grommet

base. Remove one bolt from the clamp (L), then

use bolt with support plate (J) to secure base

with pole to desktop and tighten with 6mm Allen

wrench (B1). Attach cable management clip (R)

to pole.

17.6 lbs

(8 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury. 4.4 lbs

(2 kg)

MOUNT TRAY

20-88mm

10-50mm

0mm-55mm

STEP 2

STEP 5

Place large washers (X) over screws on back of tray pole (C). Attach tray pole to mount on arm (A)

using nuts (U) with steel washers (V) and plastic washers (W) as shown in diagram, and tighten with

wrench (Z).

Slide arm (A) onto pole (B). Adjust stopper

height with 4mm allen wrench (A1).

STEP 3

Apply rubber pads (Y) to brackets (Q) as shown.

STEP 4

Attach upper tray (D) and brackets (Q) to tray

pole (C) using bolts (S) and tighten with 4mm

Allen wrench (A1).

10mm

STEP 6

Attach lower tray (E) to plate on tray pole (C) using bolts (S) and 4mm Allen wrench (A1). Mount

release handle and cable management clip (P) to preferred side of tray using bolts (S) and 4mm Allen

wrench, then use the clip to secure the black tube.

OPTION A: Right Handed

Apply bumper (F) on le side if you use mouse

with your right hand.

STEP 8

STEP 7

Attach mount (G) to pole (C) using 4mm allen

wrench (A1). Clip on holder (O) to pole (C) as

shown.

OPTION B: Le Handed

Apply bumper (F) on right side if you use mouse

with your le hand.

SA1

STEP 9

STEP 10

Slide monitor onto mount (G) and secure with thumbscrew (I). Tighten or loosen joints with allen

wrenches (A1,B1). Allen wrenches (A1,B1) can be stored in cable management clip on pole (C).

OPTION A: Flat Back Monitor

Attach VESA plate (H) to monitor. For flat back

monitors use screws (M-A or M-C) and washers

(M-E).

OPTION B: Curved Back Monitor

Attach VESA plate (H) to monitor. For curved

back monitors use screws (M-B or M-D),

washers (M-E), and spacers (M-F).

STEP 11

Adjust gas spring tension using the 6mm Allen wrench (B1). Turn counter-clockwise to increase li,

and clockwise to decrease. To adjust height of mount, li release handle, then raise or lower mount

to desired height. NOTE: use a large flat-blade screwdriver to tighten the socket set screw if the joint

makes a popping noise.

M- E M- A

M- C

M- B

M- D

M- E

M- F

OFF

Adjust as Desired

STEP 12

Loosen two screws holding cable cover to

arm, then slide cover forward to remove.

STEP 13

Insert cables into cover and reattach cover to arm.

+15°

-5°

±90 °

360 °

±90 °

LAST UPDATED: 03/06/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Indice

Altri manuali Vivo Scrivania

Manuali Scrivania popolari di altre marche

HP m9060n - Pavilion - Elite Scheda tecnica

Asus

Asus E210 Series Manuale utente

Dell

Dell Inspiron 600m Manuale utente

Dell

Dell Inspiron 3662 Manuale utente

TotalFlow

TotalFlow uFLO Manuale utente

HP Presario SV7000 - Desktop PC Manuale utente

HP ProDesk 400 G5 Manuale

Logitech

Logitech MK320 Manuale utente

Dell

Dell XPS 730 H2C Manuale utente

Sony

Sony Vaio Series Manuale utente

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuale utente

Alto

Alto MD 250 Manuale utente

Lenovo

Lenovo ThinkCentre Edge 72 Manuale

Lenovo

Lenovo ThinkStation D20 Manuale

Arbor Technology

Arbor Technology FPC-7800 Series Manuale utente

Sony

Sony VAIO VGX-TP1 Series Manuale utente

Asus

Asus Eee Box B204 Manuale utente

Dell

Dell Optiplex 9010 All In One Manuale utente