Vivotek IP7153 Manuale utente

EN - 1

English

Contact your distributor in the event of

occurrence.

Keep the Network Camera away from

water. If the Network Camera becomes

wet, power off immediately.

Refer to your user’s manual for the

operating temperature.

Power off the Network Camera as

soon as smoke or unusual odors

are detected.

Do not place the Network Camera

around heat sources, such as a

television or oven.

Keep the Network Camera away

from direct sunlight.

Do not place the Network Camera in

high humidity environments.

Contact your distributor in the event of

occurrence.

Warning Before Installation

EN - 2

Do not place the Network Camera

on unsteady surfaces.

Do not touch the Network Camera

during a lightning storm.

Do not disassemble the Network

Camera.

Do not drop the Network Camera.

Do not insert sharp or tiny objects

into the Network Camera.

EN - 3

English

Camera Stand Lens

IP7153 / IP7154

Warranty Card

Power Adapter

Quick Installation Guide Software CD

1Check Package Contents

Antenna (IP7154 only)

ST7501

Central Management Software

EN - 4

Power Cord Socket

Ethernet 10/100

RJ45 Socket

Recessed Reset Button

General I/O

Terminal Block

Audio Out

Microphone In

External/Internal

Microphone Switch

Front Panel

Back Panel

Lens

Focus Controller

Zoom Controller

2Physical Description

Built-in Microphone

Light Sensor

Status LED

Antenna

(IP7154 only)

Antenna

(IP7154 only)

EN - 5

English

For further setup, please refer to the lens' instruction manual inside the

lens package.

1. Mount the lens by turning it clockwise onto the camera mount until it stops. If

necessary, turn the lens counterclockwise slowly to achieve the best optimum

spacing.

2. Connect the lens cable plug to the camera connector.

3. Unscrew the zoom controller to adjust the zoom factor. Upon completion, tighten the

zoom controller.

4. Unscrew the focus controller to adjust the focus range. Upon completion, tighten the

focus controller.

∞

3Mounting the Lens to the Camera

EN - 6

General Connection (without PoE)

1. Connect the camera to a switch via Ethernet cable.

2. Connect the power cable from the Network Camera to a power outlet.

POWER COLL ISION

LINK

RECEI VE

PARTITION

12345

Ethernet Switch

4Network Deployment

EN - 7

English

Power over Ethernet (PoE) (IP7153 only)

POWER COLLISION

LINK

RECEIV E

PARTITION

12345

PoE Switch

POWER COLLISION

LINK

RECEIV E

PARTITION

12345

When using a non-PoE switch

Use a PoE power injector (optional) to connect between the Network Camera and a

non-PoE switch.

Non-PoE Switch

PoE Power Injector

(optional)

When using a PoE-enabled switch

This Network Camera is PoE-compliant, allowing transmission of power and data via

a single Ethernet cable. Follow the below illustration to connect the Network Camera

to a PoE-enabled switch via Ethernet cable.

EN - 8

This device complies with part 15 of the FCC rules. Operation is subject to

the following two conditions:

(1)This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesired operation.

RoHS

Network Camera

Model No:IP7153

Pat. 6,930,709 Made in Taiwan

MAC:0002D1070417

1. Install "Installation Wizard 2" from the Software Utility directory on the software CD.

2. The program will conduct an analysis of your network environment. After your network

is analyzed, please click on the "Next" button to continue the program.

3. The program will search for VIVOTEK Video Receivers, Video Servers, and Network

Cameras on the same LAN.

4. After searching, the main installer window will pop up. Click on the MAC that matches

the one labeled on the bottom of your device to connect to the Network Camera via

Internet Explorer.

00-02-D1-07-04-17 192.168.0.219 IP7153

Installation

Wizard 2

5Assigning an IP Address

0002D1070417

EN - 9

English

For further setup, please refer to user's manual on the software CD.

6Ready to Use

1. Access the Network Camera on the LAN.

2. Retrieve live video through the web browser or recording software.

Altri manuali per IP7153

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Vivotek Telecamera di sicurezza

Vivotek

Vivotek FD8361 Manuale utente

Vivotek

Vivotek PZ7131 Manuale utente

Vivotek

Vivotek MD7530 Manuale utente

Vivotek

Vivotek IP8372 Manuale utente

Vivotek

Vivotek PZ6114 Manuale utente

Vivotek

Vivotek FE9380-HV Manuale utente

Vivotek

Vivotek FE8180 Manuale utente

Vivotek

Vivotek IB9387-EHT-A Manuale utente

Vivotek

Vivotek IZ7151 Manuale utente

Vivotek

Vivotek SUPREME IP9165-HP Manuale utente

Vivotek

Vivotek IP7153 Manuale utente

Vivotek

Vivotek IP9171-HP Manuale utente

Vivotek

Vivotek FD8136 Manuale utente

Vivotek

Vivotek MD7530 Manuale utente

Vivotek

Vivotek FD8362/62E Manuale utente

Vivotek

Vivotek FE8174V Manuale utente

Vivotek

Vivotek PT3117 Manuale utente

Vivotek

Vivotek FD8133V Manuale utente

Vivotek

Vivotek FD8134 Manuale dell'operatore

Vivotek

Vivotek SD7313 Manuale utente

Vivotek

Vivotek Supreme FD8363 Manuale utente

Vivotek

Vivotek SD9366-EH-v2 Manuale utente

Vivotek

Vivotek IP139 Manuale utente

Vivotek

Vivotek IP8361 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Lumens

Lumens VC-A50PNW Manuale utente