VMC DREC Compact Manuale utente

INSTRUCTION MANUAL
(M202BVM-03-21A)
RCCB with automatic reclosing device
DREC Compact (DREC-C)

2
DREC-C
Instruction Manual

PENDIENTE DE VALIDACIÓN
SAFETY PRECAUTIONS
DISCLAIMER
VMC, reserves the right to make modi cations to the device or the unit speci cations set out
in this instruction manual without prior notice.
VMC, on its web site, supplies its customers with the latest versions of the device speci ca-
tions and the most updated manuals.
www.vmc.es
VMC, recommends using the original cables and accessories that are supplied
with the device.
DANGER
Warns of a risk, which could result in personal injury or material damage.
ATTENTION
Indicates that special attention should be paid to a speci c point.
Follow the warnings described in this manual with the symbols shown below.
If you must handle the unit for its installation, start-up or maintenance, the following
should be taken into consideration:
Incorrect handling or installation of the unit may result in injury to personnel as well as damage
to the unit. In particular, handling with voltages applied may result in electric shock, which may
cause death or serious injury to personnel. Defective installation or maintenance may also
lead to the risk of re.
Read the manual carefully prior to connecting the unit. Follow all installation and maintenance
instructions throughout the unit’s working life. Pay special attention to the installation stan-
dards of the National Electrical Code.
Refer to the instruction manual before using the unit
In this manual, if the instructions marked with this symbol are not respected or carried out correctly, it can
result in injury or damage to the unit and /or installations.
VMC, reserves the right to modify features or the product manual without prior noti cation.
3
Instruction Manual
DREC-C

CONTENTS
SAFETY PRECAUTIONS�������������������������������������������������������������������������������������������������������������������������������������3
DISCLAIMER���������������������������������������������������������������������������������������������������������������������������������������������������������3
CONTENTS������������������������������������������������������������������������������������������������������������������������������������������������������������4
REVISION LOG �����������������������������������������������������������������������������������������������������������������������������������������������������5
SYMBOLS��������������������������������������������������������������������������������������������������������������������������������������������������������������5
1�- VERIFICATION UPON RECEPTION��������������������������������������������������������������������������������������������������������������6
2�- PRODUCT DESCRIPTION������������������������������������������������������������������������������������������������������������������������������6
3�- DEVICE INSTALLATION���������������������������������������������������������������������������������������������������������������������������������7
3�1�- PRIOR RECOMMENDATIONS������������������������������������������������������������������������������������������������������������������7
3�2�- INSTALLATION �����������������������������������������������������������������������������������������������������������������������������������������7
3�3�- CONNECTION �������������������������������������������������������������������������������������������������������������������������������������������8
3�3�1�- CONNECTION DIAGRAM 2-POLE MODEL: DREC-C-2P�����������������������������������������������������������������8
3�3�2�- CONNECTION DIAGRAM 4-POLE MODEL: DREC-C-4P �����������������������������������������������������������������9
4�- OPERATION ��������������������������������������������������������������������������������������������������������������������������������������������������10
4�1�- DESCRIPTION�����������������������������������������������������������������������������������������������������������������������������������������10
4�2�- LEDs �������������������������������������������������������������������������������������������������������������������������������������������������������� 11
4�3�- START-UP������������������������������������������������������������������������������������������������������������������������������������������������12
4�3�1�- AUTOMATIC MODE ��������������������������������������������������������������������������������������������������������������������������12
4�3�2�- MANUAL MODE��������������������������������������������������������������������������������������������������������������������������������12
4�4�- OPERATING MODES������������������������������������������������������������������������������������������������������������������������������13
4�4�1�- MANUAL��������������������������������������������������������������������������������������������������������������������������������������������13
4�4�2�- AUTOMATIC ��������������������������������������������������������������������������������������������������������������������������������������13
5�- MAINTENANCE ���������������������������������������������������������������������������������������������������������������������������������������������15
6�- TECHNICAL FEATURES ������������������������������������������������������������������������������������������������������������������������������16
7�- TECHNICAL SERVICE����������������������������������������������������������������������������������������������������������������������������������19
8�- GUARANTEE �������������������������������������������������������������������������������������������������������������������������������������������������19
4
DREC-C
Instruction Manual

PENDIENTE DE VALIDACIÓN
REVISION LOG
Table 1: Revision log�
Date Revision Description
06/21 M202BVM-03-21A Initial Version
Note: The images of the devices are solely for the purpose of illustration and may dier from
the original device.
SYMBOLS
Table 2: Symbols
Symbol Description
In compliance with the relevant European directive.
Device covered by European directive 2012/19/EC. At the end of its useful life, do not
leave the unit in a household waste container. Follow local regulations on electronic equi-
pment recycling.
DC current
~AC current
5
Instruction Manual
DREC-C

1�- VERIFICATION UPON RECEPTION
Check the following points when you receive the device:
a) The device meets the specications described in your order.
b) The device has not suered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
- Installation guide
If any problem is noticed upon reception, immediately contact the transport
company and/or VMC’s after-sales service.
2�- PRODUCT DESCRIPTION
DREC-C is a 2 or 4-pole type A RCCB linked to a smart reclosing mo tor, which enables safe
reclosing of the corresponding RCCB.
In the DREC-C-2P model, the insulation reclosing mode is used for high sensitivity protection,
so that the device only recloses when the fault that caused tripping has disappeared. The rest
of the models imple ment the timed reclosing mode to ensure power supply continuity.
The device features:
-2 LED indication.
- Automatic reclosing by insulation or Time, depending on the model (Table 3).
-Protection cover for the reclosing system.
- Mode selection switch to select between Manual and Automatic operating mode and
physically lock the reclosing device.
Table 3: DREC-C Models�
Models Reclosure mode Rated current (In) Sensitivity (ΔIn)
DREC-C-2P-40-30 Isolation 40 A 30 mA
DREC-C-2P-63-30 Isolation 63 A 30 mA
DREC-C-2P-40-300 Time 40 A 300 mA
DREC-C-2P-63-300 Time 63 A 300 mA
DREC-C-4P-40-30 Time 40 A 30 mA
DREC-C-4P-63-30 Time 63 A 30 mA
DREC-C-4P-40-300 Time 40 A 300 mA
DREC-C-4P-63-300 Time 63 A 300 mA
6
DREC-C
Instruction Manual

PENDIENTE DE VALIDACIÓN
3�- DEVICE INSTALLATION
3.1.- PRIOR RECOMMENDATIONS
In order to use the unit safely, it is critical that those who handle it follow the safety
measures set out in the standards of the country where it is being used, use the
necessary personal protective equipment and pay attention to the various warn-
ings indicated in this instruction manual.
The DREC-C device must be installed by authorised and qualied sta.
Also, it is critical to keep the cables in perfect condition in order to avoid accidents, personal
injury and damage to installations.
The manufacturer of the device is not responsible for any damages resulting from failure by the
user or installer to heed the warnings and/or recommendations set out in this manual, nor for
damages resulting from the use of non-original products or accessories or those made by other
manufacturers.
If you detect any operational faults in the device or in its protection system, remove the device
from service.
This device has been designed for easy replacement in case of malfunction.
Disable the automatic reclosing function and disconnect the main protection de-
vice before handling active parts.
Please contact the after-sales service if you suspect that there is an operational
fault in the device.
3.2.- INSTALLATION
Do not use the device until it is fully installed.
The DREC-C is a device specically designed to be installed in electric panels or enclosures,
with DIN rail xing elements (IEC 60715).
To install the device on a DIN rail:
1�- Place the device at the top of the DIN rail.
2�- Swing the DREC-C downwards until it is secured to the lower section of the DIN rail.
3�- Make sure that it has been secured on the rail.
7
Instruction Manual
DREC-C

3.3.- CONNECTION
The DREC-C must be connected to an installation protected with fuses suitable for its power
supply range and consumption.
Note: Cross-section of the cable: 16 - 25mm2
Terminals, opening covers or removing elements can expose parts that are
hazardous to the touch while the device is powered
If the DREC-C indicates a permanent failure (AUTO and REC LEDs are lit),
you must check the RCCB and the installation.
If the installation of the device is done with the RCCB in the OFF state, when
panel receives voltage the device will not activate the automatic reclosing sys-
tem for safety reasons And the AUTO and REC LEDs turn on to turn o in a
few seconds. A manual reclosing of the system must be done on the panel with
voltage.
3�3�1�- CONNECTION DIAGRAM 2-POLE MODEL: DREC-C-2P
F
N
CARGA / LOAD
Figure 1: Connection diagram DREC-C-2P�
8
DREC-C
Instruction Manual

PENDIENTE DE VALIDACIÓN
3�3�2�- CONNECTION DIAGRAM 4-POLE MODEL: DREC-C-4P
CARGA / LOAD
L3
N
L1
L2
Figure 2: Connection diagram DREC-C-4P: Three phase system�
CARGA / LOAD
F
N
Figure 3: Connection diagram DREC-C-4P: Single phase system�
9
Instruction Manual
DREC-C

4�- OPERATION
4.1.- DESCRIPTION
Figure 4 and Figure 5 shows a description of the most important pieces of device.
LEDs
Protection
cover
TEST key
Mode selection
switch
RCCB Control module
Figure 4: Description of the DREC-C-2P�
LEDs
Protection
cover
TEST key Mode selection
switch
RCCB Control module
Figure 5: Description of the DREC-C-4P�
10
DREC-C
Instruction Manual
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali VMC Interruttore automatico


















