VOGELS RISE A151 Manuale utente
HANDSET FUNCTIONS
WHAT TO DO IN CASE OF AN ERROR
1
Handset functions & what to do in case of an error:
Button functionality RISE
Nr. Function Required action
1 Going up Press Up button
2 Going down Press Down button
3a Reset system 1. Move system to lowest position.
2. Press Down button 10 sec.
3. Press Down button again to finish action.
a. Feedback: System goes to its lowest
position and 7 mm up.
3b Hard System Reset 1. Unplug power cable, wait for 30+ seconds and
plug in the power cable.
2. Move system to lowest position.
3. Press Down button 10 sec.
4. Press Down button again to finish action.
a. Feedback: System goes to its lowest position
and 7 mm up.
4a Unlock child lock Press Up and Down button 2 seconds simultaneously
Feedback: System goes up and down 7 mm.
4b Lock child lock System automatically locks 5 minutes after the
last interaction.
5 Disable/enable Press Up and Down button 20 seconds simultaneously
child lock feature Feedback: System goes up and down 7 mm twice.
Not working system guide:
1 Check whether all cables are still connected (power cable, handset cable,
gyroscope cable, etc.)
2 Check whether the system obstructed by an object (for example: a desk)
3 Check if the system's child lock is unlocked. Not sure? Unlock the system.
4 If there is no object obstructing the lift, run a system reset.
5 If a System Reset, doesn't solve it, try to run a Hard System Reset.
1. Open top cover
Open the top cover, (using a screwdriver
could be useful).
Aer opening you can pull it up.
2. Plug in cable
Plug the RISE A151 Programmer cable into
the controlbox, using the outer right slot.
INSTALLER SOFTWARE
OUICK GUIDE
2
BACK
3. Connect to PC
3a: Connect to PC
• Select port
• Press Connect
3b: Fill in password
• 0000
4. Le window
4a: Status of system:
Normal, reset or Error code (E…)
4b: • Displayed current height
• Arrows:
To move system up or down
• Move to:
- Set height
- Press ‘Move to’ to go to the
predefined position
• Stop: Stop movement
(only needed in case of set
‘move to’)
4c: Press and hold to reset system
INSTALLER SOFTWARE
OUICK GUIDE
3
1a
1b
2a
2b
2c
5. Configure - Overview
5a: Creates an overview of all settings
5b: Export Image:
Creates a screenshot of the page
5c: Export data:
Creates an overview of all the data
in an ‘.ini’ file
6. Configure - Settings
6a: Switching the child lock on/o:
• Press the switch
• Press Apply Parameters
Import Parameters:
Not accessible for Installer
INSTALLER SOFTWARE
OUICK GUIDE
4
3a 3b 3c
4a
7. Configure - Limit
7a: Switch Top Limit and/or Bottom
Limit on/o
7b: Set a limit
7c: Apply Parameters to change the
settings
8. Monitoring graph
8a: Gives an overview of the current,
voltage and the position (height)
of the columns
8b: Clear Screen: Creates the graph blanc
8c: Export Image: Creates a screen shot
of the window
8d: Export Parameters:
Gives all the x and y information of
current, voltage and position
INSTALLER SOFTWARE
OUICK GUIDE
5
5b
5a
5c
6a
6b 6c 6d
9. Statistics
9a: Run/Stop: Gives an overview of the
travelled distance of the system’s
lifetime
9b: Error Reason: Gives an overview of the
number of errors in the system’s lifetime
9c: System Log: Gives an overview of the
last 10 errors and/or anti-collisions
10. Connect/Disconnect
10a: Disconnect: disconnect system
(might be useful in case the system is
not working properly)
INSTALLER SOFTWARE
OUICK GUIDE
6
7a
7b
7c
8a
Vogel’s Products BV
HONDSRUGLAAN 93,
5628 DB EINDHOVEN,
THE NETHERLANDS
T +31 (0)40 264 74 00
E inf[email protected]
W www.vogels.com
Indice
Altri manuali VOGELS Sistema di sollevamento
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
