VWR Homogeniser Manuale utente
en
fr
it
es
de
po
User Manual
Manuel d’utilisation
Manuale d’uso
Manual del usuario
Benutzerhandbuch
Manual do usuário
Catalog No Description
432-0366 Mini Bead Mill 230V, 300W
Mini Bead Mill
Homogeniser
User Manual
2
Legal Address of Manufacturer
United States
VWR International, LLC
100 Matsonford Rd
Radnor, PA 19087
800-932-5000
http://www.vwr.com
Europe
VWR International bv
Researchpark Haasrode 2020
Geldenaaksebaan 464
3001 Leuven
+ 32 16 385011
http://be.vwr.com
Country of Origin
Intended Use
The VWR Mini Bead Mill is intended for milling and homogenising of a
number of substances. Not intended for medical or diagnostics purposes.
Made in USA
Warranty
VWR warrants that this product will be free from defects in material and
workmanship for a period of one year from date of delivery. If a defect is present,
VWR will, at its option and cost, repair, replace, or refund the purchase price of this
product to the customer, provided it is returned during the warranty period. This
warranty does not apply if the product has been damaged by accident, abuse, misuse,
or misapplication, or from ordinary wear and tear. If the required maintenance
and inspection services are not performed according to the manuals and any local
regulations, such warranty turns invalid, except to the extent, the defect of the
product is not due to such non-performance.
Items being returned must be insured by the customer against possible damage or
loss. This warranty shall be limited to the aforementioned remedies. IT IS EXPRESSLY
AGREED THAT THIS WARRANTY WILL BE IN LIEU OF ALL WARRANTIES OF FITNESS
AND IN LIEU OF THE WARRANTY OF MERCHANTABILITY.
Compliance with Local Laws and Regulations
The customer is responsible for applying for and obtaining the necessary regulatory
approvals or other authorizations necessary to run or use the Product in its local
environment. VWR will not be held liable for any related omission or for not
obtaining the required approval or authorization, unless any refusal is due to a
defect of the product.
Technical Service
Web Resources
Visit the VWR website at www.vwr.com for:
• Complete technical service contact information
• Access to the VWR Online Catalogue, and
information about accessories and related products
• Additional product information and special offers
Contact Us
For information or
technical assistance,
contact your local VWR
representative or visit
www.vwr.com.
Table of Contents
Unpacking
Overview
General Operation
Loading Sample Tubes
Changing the Tube Holder
Changing the Neck Gasket
Troubleshooting
Transporting the Mini Bead Mill
4
5
6
7
8
9
10
Equipment Disposal
This equipment is marked with the crossed out wheeled
bin symbol to indicate that this equipment must not
be disposed of with unsorted waste. Instead it is your
responsibility to correctly dispose of your equipment
at life cycle - end by handing it over to an authorized
facility for separate collection and recycling. It is also
your responsibility to decontaminate the equipment
in case of biological, chemical and/or radiological
contamination, so as to protect from health hazards
the persons involved in the disposal and recycling of
the equipment. For more information about where you can drop off your waste of
equipment, please contact your local dealer from whom you originally purchased
this equipment. By doing so, you will help to conserve natural and environmental
resources and you will ensure that your equipment is recycled in a manner that
protects human health.
Thank you.
4
Unpacking
Lift foam from box.
Lift unit up and off of the box bottom.
DO NOT LIFT THE UNIT BY HOLDING THE LID.
Remove Tool Kit and Power Cord
Place the unit on a stable surface.
Remove the 2 screws from the bottom of the unit.
Connect power cord
1.
2.
3.
4.
5.
5
The Mini Bead Mill consists of the following:
Description Quantity
Mini Bead Mill 1
Power Cord 1
Spare Fuse 1
7 mL Tube Holder Assembly 1
2 mL Tube Holder Assembly 1
Allen Key 1
User Manual 1
Overview
14
25
3
1. Lid
2. Keypad
3. Lid Latch
4. ON/Off Switch
5. Power Cord Port
6. Speed Control
7. Timer Control
8. Run Button
9. Stop Button
6 8
79
6
General Operation
1. Power
- Plug in the power cord and move the On/Off switch on back of the unit to the On position.
2. Set Speed
- Adjust speed using up and down buttons.
3. Set Timer
- Adjust run time using up and down buttons from 1 sec. to 5 min.
4. Start
- Press Run button.
5. Pause/Stop
- Press Stop Button to Pause.
- Press Stop again to reset timer and cancel run
1. Digital Display
2. Timer
3. Speed Control
4. Timer Control
5. Speed Setting
6. Run Button
7. Stop Button
8. On/Off switch
(Back of Unit)
Speed
Setting
Processing
Power in G’s
Processing
Speed in m/s
1 30 1.5
2 60 2.5
3 90 3.7
4 120 4.4
5 150 5.0
5
6
7
8
1
2
3
4
7
Loading Sample Tubes
1.5 mL & 2 mL Tubes
7 mL Tubes
8
Changing the Tube Holder
Changing the Neck Gasket
Use the supplied 3 mm
Allen wrench to loosen tube
carriage holder screw
Caution: Turn unit off and
unplug power cord.
Use the supplied 3 mm Allen
wrench to tighten tube
carriage holder screw
1. 3.
2.
Slide the new neck gasket
onto the pivot shaft and
housing
3.
Secure the new neck gasket
using the restriction tie with
the clamp positioned toward
the bottom of the instrument.
Tighten central screw.
4.
Use the supplied 3 mm Allen
wrench to loosen the central
screw and remove restriction
tie and old neck gasket.
Use the supplied 3 mm Allen
wrench to tighten the central
screw and secure the tube
carriage.
2.
5.
Caution: Turn unit off and
unplug the power cord.
1.
9
Error
Code Definition Cause Possible Solution
Error 1
Display screen
shows
incomplete or
unusual characters
CPU needs to be
reset
Turn off the unit. Wait 30 seconds.
Turn the unit back on.
Error 2 No display on the
screen
No Power
Check main voltage.
Check that the voltage of the unit
(100V-240V) matches what is being delivered
by the main power supply.
Make sure the unit is plugged in properly.
Check and replace fuses if blown.
Faulty display
screen
Turn off the unit.
Contact manufacturer for assistance.
Error 3
Unit powers on but
motor does not
turn
Faulty motor Contact manufacturer for assistance.
Error 4 Close Door
Lid is not seated
properly.
Check Lid latch for obstruction
Press lid and ensure the handle is closed
Detection system
is faulty.
Troubleshooting
Error Codes
10
Transporting the Mini Bead Mill
The Mini Bead Mill must be shipped in its original packaging.
Before transporting please follow these steps.
Remove all tubes, and cover the unit in its plastic bag.
The tube carriage will slide back. Lift the tube
carriage to align the motor mount holes to the
holes in the base plate.
Insert screws with Allen key until you feel them
engage (It may take some adjusting to get them
aligned with the threads in the unit).
Tighten screws until completely seated.
1.
2.
1. 2.
Indice
Lingue:
Altri manuali VWR Attrezzature da laboratorio
VWR
VWR 82007-202 Manuale utente
VWR
VWR VWR INCU-Line IL 10 Manuale utente
VWR
VWR avantor 730-1461 Scheda informativa del prodotto
VWR
VWR 76019-132 Manuale utente
VWR
VWR Bead Mill MAX Manuale utente
VWR
VWR INCU-Line IL 56 Manuale utente
VWR
VWR avantor MICRO STAR 30R Manuale utente
VWR
VWR avantor Micro Star 21 Manuale utente
VWR
VWR Mega Star 600 Manuale utente
VWR
VWR avantor UHP Manuale utente
VWR
VWR avantor 442-1265 Manuale utente
VWR
VWR Powerpette Pro Manuale utente
VWR
VWR avantor TubeRoller 5 Manuale utente
VWR
VWR avantor Chemi Premium Manuale utente
VWR
VWR SAS Super ISO Manuale utente
VWR
VWR ELECTRONIC PIPETTE Manuale utente
VWR
VWR Signature VE2/V2 Manuale utente
VWR
VWR Clinical 200 Manuale utente
VWR
VWR avantor MCC 2000 Manuale utente
VWR
VWR Standard Series Manuale utente
Manuali Attrezzature da laboratorio popolari di altre marche
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuale utente
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuale utente
NI
NI PXI-5422 Manuale
Collomix
Collomix Aqix Manuale utente
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente
Ocean Insight
Ocean Insight FLAME-NIR+ Manuale utente
