Wacker Neuson GV 7003A Manuale utente

Operator´s manual

Portable Generator

GV 7000A

GV 7003A

02.2013

5100004230en / 002

Manufacturer

Wacker Neuson Produktion GmbH & Co. KG

Preußenstraße 41

80809 München

www.wackerneuson.com

Tel.: +49-(0)89-354 02-0

Fax: +49-(0)89-354 02-390

Translation of the original operator's manual in German

1Foreword

3100_0000_0002.fm

1Foreword

This operator's manual contains information and procedures for the safe opera-

tion and maintenance of your Wacker Neuson machine. In the interest of your

own safety and to prevent accidents, you should carefully read through the safety

information, familiarize yourself with it and observe it at all times.

This operator's manual is not a manual for extensive maintenance and repair

work. Such work should be carried out by Wacker Neuson service or authorized

specialists.

The safety of the operator was one of the most important aspects taken into con-

sideration when this machine was designed. Nevertheless, improper use or in-

correct maintenance can pose a risk. Please operate and maintain your Wacker

Neuson machine in accordance with the instructions in this operator's manual.

Your reward will be troublefree operation and a high degree of availability.

Defective machine parts must be replaced immediately!

Please contact your Wacker Neuson representative if you have any questions

concerning operation or maintenance.

No part of this publication may be reproduced in any form or by any means, elec-

tronic or mechanical, including photocopying, without the expressed written per-

mission of Wacker Neuson.

Any type of reproduction, distribution or storage on data media of any type and

form not authorized by Wacker Neuson represents an infringement of copyright

and will be prosecuted.

We expressly reserve the right to make technical modifications – even without

special notice – which aim at further improving our machines or their safety stan-

dards.

2 Introduction

100_0000_0003.fm 4

2Introduction

2.1 Means of representation for this operator's manual

Warning symbols

This operator's manual contains safety information of the categories:

DANGER, WARNING, CAUTION, NOTICE.

They should be followed to prevent danger to life and limb of the operator or dam-

age to equipment and exclude improper service.

Notes

Note: Complementary information will be displayed here.

DANGER

This warning notice indicates immediate hazards that result in serious injury or

even death.

XDanger can be avoided by the following the actions mentioned.

WARNING

This warning notice indicates possible hazards that can result in serious injury

or even death.

XDanger can be avoided by the following the actions mentioned.

CAUTION

This warning notice indicates possible hazards that can result in minor injury.

XDanger can be avoided by the following the actions mentioned.

NOTICE

This warning notice indicates possible hazards that can result in material dam-

age.

XDanger can be avoided by the following the actions mentioned.

2 Introduction

5100_0000_0003.fm

Instructions

XThis symbol indicates there is something for you to do.

1. Numbered instructions indicate that you have to carry out something in a de-

fined sequence.

This symbol is used for lists.

2.2 Wacker Neuson representative

Depending on your country, your Wacker Neuson representative is your Wacker

Neuson service, your Wacker Neuson affiliate or your Wacker Neuson dealer.

You can find the addresses in the Internet at www.wackerneuson.com.

The address of the manufacturer is located at the beginning of this operator's

manual.

2.3 Described machine types

This operator's manual is valid for different machine types from a product range.

Therefore some figures can differ from the actual appearance of your machine.

It is also possible that the descriptions include components which are not a part

of your machine.

Details for the described machine types can be found in the chapter Technical

data.

2 Introduction

100_0000_0003.fm 6

2.4 Identification of the machine

Nameplate data

The nameplate lists information that uniquely identifies your machine. This infor-

mation is needed to order spare parts and when requesting additional technical

information.

XEnter the information of your machine into the following table:

Item Designation Your information

1 Group and type

2 Construction year

3 Machine no.

4 Version no.

5 Item no.

Original-Konformitätserklärung

EG-Konformitätserklärung

Hersteller

Wacker Neuson Produktion GmbH & Co. KG, Preußenstraße 41, 80809 München

Produkt

Konformitätsbewertungsverfahren

Nach 2000/14/EG, Anhang VIII.

Benannte Stelle

SNCH Société Nationale de Certification et ’Homologation, L-5230 Sandweiler

Richtlinien und Normen

Hiermit erklären wir, dass dieses Produkt den einschlägigen Bestimmungen und

Anforderungen folgender Richtlinien und Normen entspricht:

2006/42/EG, 2006/95/EG, 2000/14/EG, 2004/108/EG, 2011/65/EU

Bevollmächtigter für technische Unterlagen

Axel Häret,

Wacker Neuson Produktion GmbH & Co. KG, Preußenstraße 41, 80809 München

Produkt GV 7000A GV 7003A

Produkt-Art Generator

Produkt-Funktion Erzeugen von Strom

Artikel-Nummer 0009348 0009353 5100002155

Installierte Nutzleistung 5,47 kW 5,60 kW

Gemessener

Schallleistungspegel

97 dB(A)

Garantierter

Schallleistungspegel

97 dB(A)

Dr. Michael Fischer

Geschäftsführer Technik und Innovation

München, 01.02.2013

wc_bo5000187301_08TOC.fm 9

Table of ContentsGV 7000A / 7003A

Foreword 3

1 Safety Information 11

1.1 Signal Words Used in this Manual ..................................................... 11

1.2 Machine Description and Intended Use ............................................. 12

1.3 Safety Guidelines for Operating the Machine ..................................... 13

1.4 Operator Safety while Using Internal Combustion Engines ............... 16

1.5 Service Safety .................................................................................... 17

2 Labels 19

3 Lifting and Transporting 20

4 Operation 21

4.1 Preparing the Machine for First Use ................................................... 21

4.2 Power Requirements .......................................................................... 22

4.3 Installation .......................................................................................... 22

4.4 Generator Derating ............................................................................. 24

4.5 Grounding the Generator ................................................................... 25

4.6 Operating Heavy Loads ...................................................................... 25

4.7 Use of Extension Cords ...................................................................... 26

4.8 Control Panel ...................................................................................... 28

4.9 Before Starting ................................................................................... 30

4.10 Starting ............................................................................................... 30

4.11 Stopping ............................................................................................. 31

4.12 Emergency Shutdown Procedure ....................................................... 31

10 wc_bo5000187301_08TOC.fm

Table of Contents GV 7000A / 7003A

5 Maintenance 32

5.1 Periodic Maintenance Schedule ..........................................................32

5.2 Engine Oil ............................................................................................33

5.3 Servicing the Air Cleaner .....................................................................34

5.4 Spark Plug ...........................................................................................35

5.5 Engine Speed ......................................................................................36

5.6 Long-Term Storage .............................................................................37

6 Basic Troubleshooting 38

7 Technical Data 39

8 Schematics 42

8.1 GV 7000A—Electrical Schematic ........................................................42

8.2 GV 7003A—Electrical Schematic ........................................................43

Altri manuali per GV 7003A

Indice

Altri manuali Wacker Neuson Generatore portatile

Wacker Neuson

Wacker Neuson GV 2500A Manuale utente

Wacker Neuson

Wacker Neuson G50 Manuale utente

Wacker Neuson

Wacker Neuson GS 12Ai Manuale utente

Wacker Neuson

Wacker Neuson G 25 Manuale utente

Wacker Neuson

Wacker Neuson G 43 Manuale utente

Wacker Neuson

Wacker Neuson G70 Manuale utente

Wacker Neuson

Wacker Neuson GP 4000 Manuale utente

Wacker Neuson

Wacker Neuson G 240 Manuale utente

Wacker Neuson

Wacker Neuson GP 2500A Manuale utente

Wacker Neuson

Wacker Neuson GS 5.6A Manuale utente

Wacker Neuson

Wacker Neuson GV 3800A Manuale utente

Wacker Neuson

Wacker Neuson G50 Manuale utente

Wacker Neuson

Wacker Neuson GP 4000 Manuale utente

Wacker Neuson

Wacker Neuson G2.5A Manuale utente

Wacker Neuson

Wacker Neuson GPS 9700 Manuale utente

Wacker Neuson

Wacker Neuson G 14 Manuale utente

Wacker Neuson

Wacker Neuson GP 3800A Manuale utente

Wacker Neuson

Wacker Neuson G 25 Manuale utente

Wacker Neuson

Wacker Neuson GP 3800A Istruzioni operative

Wacker Neuson

Wacker Neuson G 150 Manuale utente

Wacker Neuson

Wacker Neuson GP 2500A Manuale utente

Wacker Neuson

Wacker Neuson GPS9700A Manuale utente

Wacker Neuson

Wacker Neuson GV 3800A Manuale utente

Wacker Neuson

Wacker Neuson G 100 Manuale utente

Manuali Generatore portatile popolari di altre marche

Kohler

Kohler 20EORZ Manuale di istruzioni

Powerhorse

Powerhorse 83171 Manuale utente

HURST

HURST ML-630-SI Manuale utente

ETQ

ETQ TG4000 Manuale utente

Briggs & Stratton

Briggs & Stratton 40265 Guida all'installazione

ConMed

ConMed 7550 Manuale utente

Owon

Owon Waveform Generator Manuale utente

evertz

evertz 7700 Series Manuale utente

Power Stroke

Power Stroke PS906025 Manuale utente

Firefly

Firefly Cygnus CYG2400/460/24 Manuale utente

Draper

Draper PG950S Aggiornamento firmware

PowerBoss

PowerBoss PowerBoss Manuale utente

SDMO

SDMO SH 4000 Manuale utente

EINHELL

EINHELL STE 5500 Manuale utente

Wanco

Wanco WI3000P Manuale utente

Full Boar

Full Boar FBT-3300 Manuale utente

Dwyer Instruments

Dwyer Instruments ASG Manuale utente

Westinghouse

Westinghouse WH1000i Series Manuale utente