Wahoo KICKR BIKE Istruzioni per il montaggio
OWNER’S MANUAL AND
ASSEMBLY INSTRUCTIONS
smart bike
ENGLISH
1
Thank you for purchasing the Wahoo
KICKR BIKE!
DOWNLOAD THE WAHOO APP TO COMPLETE SETUP AND FOR ESSENTIAL NEW
PRODUCT UPDATES AND OPTIMIZED PERFORMANCE
LEARN MORE:
For instructional videos, compatible apps, FAQs, or to submit a support request
please visit: www.wahoofitness.com/support
PLEASE CONTACT US WITH
QUESTIONS OR CONCERNS AT:
Wahoo Fitness
90 W. Wieuca Rd NE , Suite 110
Atlanta, GA 30342 United States
TELEPHONE:
United States: 1-877-978-1112
Germany: +49-30-568-373827
United Kingdom: +44-800-808-5773
Phone Hours: Monday - Friday
10am-7pm Eastern Time Zone
For safety, read this manual and all safety information thoroughly before
assembly and use.
• Assemble the KICKR BIKE only as stated in the information contained in this
manual.
• Do not modify the KICKR BIKE.
• All instructions can be viewed on our website:
www.wahoofitness.com/instructions.
• Images may not reflect final product exactly.
The following instructions must be observed at all times in order to prevent
personal injury and physical damage to equipment and surroundings. The
instructions are classified according to the degree of danger or damage which
may occur if the product is used incorrectly:
Failure to follow the instructions will result in death or serious injury.
Failure to follow the instructions will result in death or serious injury.
Failure to follow the instructions could cause personal injury and/or physical
damage to equipment or surroundings.
IMPORTANT NOTICE
DANGER
WARNING
CAUTION
2
SAFTEY INFORMATION
• Improper or excessive exercise can result in serious injury. Always consult your physician
before beginning or modifying any exercise program.
• The Wahoo App KICKR BIKE Fit algorithm(s) do not guarantee injury prevention.
• Contact with the moving parts of the KICKR BIKE could result in serious injury.
- Do not put hands or objects near moving parts of the KICKR BIKE.
- Keep children and pets away from the KICKR BIKE.
- Do not dismount the KICKR BIKE while the flywheel is in motion.
- Do not wear loose clothing or shoes with loose laces that could result in unintended
contact with moving parts.
• Do not exceed the maximum rider weight of 250 lbs. (113.5 KG).
• Instability of the KICKR BIKE could result in serious injury. Only use the KICKR BIKE on
stable, level surfaces.
• The KICKR BIKE is intended for indoor use only. Do not store outdoors or near water.
• The KICKR BIKE may become hot to the touch when used for extended periods of time.
Allow components to cool before touching.
• To avoid risk of fire or electric shock, only use the included power adapter with the
KICKR BIKE.
• Unplug the KICKR BIKE when not in use and prior to cleaning and/or maintenance.
• Device alterations, improper and/or incomplete use, assembly or operation can
result in serious injury.
ENSURE PROPER ASSEMBLY
• Follow the instructions provided in the manual when assembling the product.
• Read all safety information and ensure understanding of assembly instructions before
assembling and using the KICKR BIKE.
• Keep this manual for future reference.
• Improper assembly, maintenance or use will void the warranty.
• The KICKR BIKE may be placed on a mat to protect floor or carpet if desired.
• Wahoo Fitness is not liable for improper or incomplete assembly of the KICKR BIKE.
CAUTION
ENGLISH
3
BEFORE EACH RIDE
• Check to ensure that stem bolts are tight and that handlebars cannot rotate.
• Confirm that your saddle is properly installed and all bolts are properly tightened.
• Ensure that both the levers for adjusting reach and setback are fully closed.
• Check that the seatpost and steer tube quick release clamps are tightened
and fully closed.
• Ensure that the standover height pin is properly seated and resting in the
corresponding height position hole and that the lever is fully closed.
• That your pedals are properly installed and adequately tightened.
• Refer to this manual for proper torque specs.
• Before each ride ensure that the area is clear and that the KICKR BIKE has full range
of tilt motion.
• Level the KICKR BIKE’s feet and make sure the floor is clear of any debris.
• Check the power cord and brick for any damage before plugging it in.
• Ensure the KICKR BIKE is in locked mode before starting your ride.
MAINTENANCE AND STORAGE
It is important to follow the below maintenance tips to ensure optimal performance
of your KICKR BIKE:
After each training session:
• Use a soft cloth to wipe the KICKR BIKE dry or remove any sweat or water.
• Unplug the KICKR BIKE when stored or plug into surge protector.
• Routinely check for signs of rust, corrosion, or excessive wear.
• Inspect all bolts and screws for rust or damage.
To move and store your KICKR BIKE, use the casters to move the KICKR BIKE to a safe
place for storage:
• Grab the handlebars and lift, then grab the front foot. Hold the front foot to navigate
to place of storage.
4
(a)
(2)
(b)
(f)
(e)
(1)
BOX CONTENTS
(1) KICKR BIKE main assembly
(2) ACCESSORY BOX
(a) Rear stabilizer legs (2)
(b) Handlebar Assembly
(c) Seatpost Assembly
(d) Pedals
(e) 5mm Hex Bolts (X4)
(f) Allen Wrenches (4,5,6mm)
(g) AC Power Adapter
(c)
(d)
(g)
PPROTIP: Save all packaging and protective material for transportation
and storage
ENGLISH
1
235
6
7
8
4
9
10
11
13
12
14
16 15
1
23
4
56
7
8
9
13
12 11
10
14
1516
5
KICKR BIKE PARTS
(1) Saddle
(2) Seatpost
(3) Steer Tube
(4) Stem
(5) Handlebars
(6) Shifters
(7) Head Tube
(8) LED Display
(9) Water Bottle Cage
(10) Crank Arms
(11) Pedals
(12) Flywheel
(13) Base
(14) Rear Stabilizer Leg
(15) Leveling Feet
(16) Castors
2
1
6
KICKR BIKE ADJUSTMENT POINTS
Standover Height Adjustment
Setback Adjustment
Stack Height Adjustment
Saddle Height Adjustment
Reach Adjustment
Crank Length Adjustment
ENGLISH
1
2
5
mm
24 - 28 N- m
Tightening torque
CAUTION
Heavy object.
Two person lift
required.
7
KICKR BIKE SETUP
KICKR BIKE assembly requires two people.
Remove and lay out all items from the accessory box, ensuring all items are included.
To begin, team lift the KICKR BIKE to remove it from the box.
With one person tilting the frame for access,
assemble stabilizer leg to lower frame with
supplied 5mm hex bolts. Repeat process for
opposite side.
1
2
3
3
1
2
2
The handlebars will be tipped down. Use a 4mm Allen wrench to loosen (but do
not remove) the stem bolts on the face plate. Rotate the handlebars to your desired
position. Tighten stem bolts evenly on the face plate.
4
mm
05 - 06 N- m
Tightening torque
8
KICKR BIKE ASSEMBLY
Attach the handlebar
assembly to the KICKR BIKE
using front reach extension
quick release.
ENGLISH
1
2
3
9
KICKR BIKE ASSEMBLY continued
(7) Plug both of the shifter cords into
the bottom of the LED display screen.
Shifter cords may be connected to any
of the 3 available ports. The LED display
also features a USB port for device
charging.
Insert the seatpost assembly into the
KICKR BIKE by loosening/tightening the
rear extension quick release.
Indice
Lingue:
Altri manuali Wahoo Cyclette
