Walker WP11DTB Manuale utente
DIGITAL TERRESTRIAL RECEIVER
OPERATING INSTRUCTIONS
WP11DTB
BE WALKER WISE...logon to www.walker.ie
SAORVIEW Digital Receiver
1
CONTENTS
1. GENERAL PROPERTIES ...................................................................................................... 2
2. SAFETY PRECAUTIONS ....................................................................................................... 3
3. PREPARING .......................................................................................................................... 4
3.1. REMOTE CONTROL ........................................................................................................... 4
3.2. CONNECTIONS .................................................................................................................. 5
3.2.1. CONNECTION TO THE TV .............................................................................................. 5
3.2.2. PUTTING INTO OPERATION .......................................................................................... 6
3.2.3. SOCKETS ........................................................................................................................ 6
4. REMOTE CONTROL FUNCTIONS ........................................................................................ 7
4.1. REMOTE CONTROL LAYOUT ............................................................................................ 7
MENU INTERFACE .................................................................................................................... 9
FIRST TIME INSTALLATION ..................................................................................................... 9
MAIN MENU ............................................................................................................................. 10
5. CHANNEL LIST .................................................................................................................... 10
5.1. NAVIGATING THE WHOLE LIST OF CHANNELS ............................................................ 10
5.2. MOVING CHANNELS ........................................................................................................ 11
5.3. DELETING UNWANTED CHANNEL ................................................................................. 11
5.4. RENAMING CHANNELS ................................................................................................... 11
5.5. ADDING LOCKS TO CHANNELS ..................................................................................... 11
5.6. SETTING FAVOURITES ................................................................................................... 11
6. PROGRAMME GUIDE (7 DAYS EPG) ................................................................................. 12
7. TIMERS ................................................................................................................................ 12
8. SETUP ................................................................................................................................. 13
8.1. CONFIGURATION MENU ................................................................................................. 13
8.1.1. DIGITAL AUDIO OUTPUT .............................................................................................. 13
8.1.2. AUDIO DELAY................................................................................................................ 14
8.1.3. LOW POWER ................................................................................................................. 14
8.1.4. FAVOURITE MODE ....................................................................................................... 14
8.1.5. CHANNEL LIST .............................................................................................................. 14
8.1.6. ACTIVE ANTENNA ......................................................................................................... 14
8.1.7. RECEIVER UPGRADE - OAD ........................................................................................ 14
8.1.8. TV SETTINGS ................................................................................................................ 15
8.1.8.1. TV TYPE ...................................................................................................................... 15
8.1.8.2. DISPLAY FORMAT ..................................................................................................... 15
8.1.8.3. TV OUT ....................................................................................................................... 15
8.1.8.4. HDMI RESOLUTION ................................................................................................... 15
8.1.9. PARENTAL CONTROL .................................................................................................. 15
8.1.9.1. MATURITY LOCK ........................................................................................................ 15
8.1.9.2. MENU LOCK ............................................................................................................... 15
8.1.9.3. SET PIN ....................................................................................................................... 16
8.1.10. TIME SETTINGS .......................................................................................................... 16
8.2. LANGUAGE ....................................................................................................................... 16
8.3. INSTALLATION ................................................................................................................. 17
8.3.1. AUTOMATIC SEARCH ................................................................................................... 17
8.3.2. MANUAL SEARCH ......................................................................................................... 17
8.3.3. FIRST TIME INSTALLATION ......................................................................................... 17
9. MEDIA BROWSER ............................................................................................................... 18
10. SOFTWARE UPGRADE THROUGH USB ......................................................................... 20
11. MESSAGES ....................................................................................................................... 21
12. CHANNEL NAVIGATION ................................................................................................... 22
13. VOLUME CONTROL .......................................................................................................... 22
14. TROUBLESHOOTING GUIDE ........................................................................................... 23
15. TECHNICAL SPECIFICATIONS ......................................................................................... 24
2
1. GENERAL PROPERTIES
DVB and VBI Teletext
200 Channels
English, German, French, Spanish, Portuguese,
Italian, Finnish, Swedish, Danish, Norwegian,
Slovak OSD.
DVB 7 days event information (7 days EPG)
TV scart (with RGB and CVBS support)
HDMI output
Format resolution: 1080i, 720p, 576p
Last watched channel saving
Automatic search for all channels
Stand-by mode channels search support
(optional)
5 timers can be used either for recording or as
a sleep timer
Timer function (TV timer) programmable via
EPG
5 Favourite list
Parental lock options at different levels
Channel lock (password protected)
Menu/Installation lock (password
protected)
Low power consumption (less than 1 W)
(Optional)
RECEPTION :
DVB-T Compliant
Input frequency range: VHFIII; 174–
230 MHz, 8 MHz bandwith
UHFIV and UHFV; 470-862 MHz,
8MHz bandwith
Input signal level: min: -79 dBm
max: -15 dBm
Supports 16-, 64-QAM modulations
Signal strength and quality bar for
antenna adjustment
Manual and automatic search options
VIDEO & OSD :
Video: MP @ ML, PAL, 4:3/16:9
MPEG-4 AVC/H.264 HP@L4
Video Decoder
Screen Format: Letterbox 14:9,
Letterbox 16:9 and center cut out.
8-bit OSD colour, 720x576 pixels
Decoding & Video Out: PAL
AUDIO:
Audio: MPEG-1 layer I / II, MPEG-2
layer II, MPEG-2 AAC, MPEG-4 AAC
Multi-format audio decoder
Multi language audio support (up to
10)
Audio mute and volume control
SYSTEM RESOURCES
ST40 32 bit superscalar RISC CPU @
266 MHz
4 X 32 Mbyte (128 MB) RAM memory
8 Mbyte Flash memory
3
2. SAFETY PRECAUTIONS
Power Source
Always use the provided AC adapter.
Operate only from the power source specified
on the AC adapter.
During use of the AC adapter, the surface of it
gets hot. This is normal and not a failure.
Do not cover the case of the AC adapter with
any material, while it is in operation. Leave 15
cm space (minimum) around the AC adapter.
The rating information and safety caution of the
AC adapter are on it’s case.
Warning: When the set is not in use for a long time,
disconnect it from the mains supply.
Power Cord
Do not place the unit, a piece of furniture, etc., on
the power cord (mains lead), or pinch the cord.
Handle the power cord by the plug. Do not pull out
the plug by tugging the cord and never touch the
power cord when your hands are wet as this could
cause a short circuit or electric shock. Never make
a knot in the cord or tie it with other cords. The
power cords should be routed in such a way that
they are not likely to be stepped on. Check the
power cord once in a while. When you find it
damaged, ask closest service agent for help. When
the AC power cord needs to be changed, it should
be done at a qualified service shop only.
Choice of Location
• Please do not place the set in a place subject to
direct sun light, excessive dust or mechanical shock
or in a location near heat sources.
• The set should be placed on a solid and safe
base. Do not place the apparatus on a soft surface
such as a rug that might block the ventilation holes
on the bottom.
• A location should not be selected such as a room
with high humidity, as the condensation, arising in
the kitchen for example, may cause malfunction or
damage the set.
• Heating or other thermal radiation under the set
also may cause malfunction or damage the set.
• The hot air, which arises during the operation,
should be ventilated with sufficient air circulation.
Please do not put the set into closed areas and do
not cover it.
• Please avoid the contact of the set with water or
humidity. Do not put into operation near bath,
swimming pools.
• Take care to provide a good air circulation. Place
the apparatus in a location with adequate ventilation
to prevent heat build-up in the apparatus.
• Should any solid object or liquid fall into the
cabinet, unplug the apparatus and have it checked
by qualified personnel before operating it any
further.
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids,
such as vases, shall be placed on the
apparatus.
The mains plug is used as the disconnect
device, the disconnect device shall remain
readily operable.
CAUTION
Batteries shall not be exposed to excessive heat
such as sunshine, fire or the like.
4
FRONT PANEL
SAORVIEW Digital Receiver
ON/OFF
KEY
PROG
DOWN
PROG
UP
DISPLAY
NOTE: No display will be shown in standby mode in order to keep the power consumption to a minimum and
save energy.
REAR PANEL
35027700
SCART (TV)
TV OUT AUDIO L AUDIO R
HDMI OUT
DC IN
USB
ANT. IN
1
2
3
4
5
6
7
8
1. TV OUT : To watch analogue channels on the TV
2. ANTENNA IN : Aerial input
3. HDMI OUT : HDMI video output
4. USB INPUT
5. TV SCART : TV SCART connection
6. ANALOGUE AUDIO LEFT/RIGHT : Analogue Audio output
7. OPTICAL AUDIO : Optical Digital Audio Output
8. POWER SUPPLY : DC IN (12V)
3. PREPARING
3.1. REMOTE CONTROL
First open the battery cover on the underside of the remote control. Put in both batteries 1.5 Volt (RO3/AAA)
referring to the imprinted symbols (+/-) in the battery case and put on the battery cover again. While using the
remote control, direct it towards the front side of the receiver. If the remote control does not work or the chosen
function does not work, the batteries are most probably exhausted and they should be replaced as soon as
possible. Please use only the leak proof batteries. It is best to remove the batteries from the remote unit if you
will not be using the remote control unit for long time.
5
3.2. CONNECTIONS
3.2.1. CONNECTION TO THE TV
Connect your set-top box with a scart cable using the TV scart connector on the rear panel to your television’s
scart connector or use an HDMI cable to connect the HDMI output of your receiver to the HDMI input of your TV
(only if your TV has an HDMI input).If you want to get a high quality picture, prefer the HDMI output. The set-top
box gives RGB or CVBS output. If you want to get the picture via scart connector and your TV’s scart connector
has an RGB input, then you can switch your digital set-top box to RGB mode, by toggling TV out menu to RGB
mode, in configuration menu. So, you will be able to achieve high performance from your digital set-top box.
6
1) Connect one end of Scart cable to TV Scart connector on the STB and the other end of to a Scart connector
on your TV
3.2.2. PUTTING INTO OPERATION
Be sure that you put through all the cable connections. After plugging in the mains cord of the set-top-box to the
mains supply, a red light will be seen on the front panel (Standby mode). When the set-top-box is first powered
up please wait for about 7 seconds before activating the receiver since booting of software will take some time.
Then, you can turn on your digital set-top box by pressing the standby button on the remote control. You will
see that the red light on the front panel will change to blue (Power on mode).
Note: If your set-top-box supports low power mode, then ANT OUT will not work while the box is in standby
mode.
3.2.3. SOCKETS
TV SCART
Two IEC Connectors, ANT IN is the antenna input. TV OUT is for to output the loop through of analogue or
digital signals.
HDMI output
Analogue audio output (left/right)
Optical Audio Output (digital audio output)
USB input (optional)
7
4. REMOTE CONTROL FUNCTIONS
4.1. REMOTE CONTROL LAYOUT
OK
TEXT BACK
MENU
INFO
PR
VOL
2 3
5 6
78 9
0
ABC DEF
GHI JKL MNO
LIB.
P P
SUBT.
1
4
PQRS TUV WXYZ
FAV. WIDE
GUIDE
PIP PIP- SWAPPIP+
TIMERS
AUX
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
8
BUTTON FUNCTION
1. Standby ON / Standby
2. (optional) Search Forward
3. LIB. Media Browser menu
4. Timers Timer Setup
5. (optional) Record button
6. Info I-Bar
7. Direction buttons / OK Navigation / Entering the channel list
8. Back / Exit Exit
9. P+ / P- Channel Up / Down
10. Yellow Yellow Teletext function button / Audio mode selection
11. Blue Teletext function button / Change language
12. Number buttons Numerical buttons
13. PP Swap channels (with last viewed channel)
14. Wide TV aspect ratio mode
15. Subt. Show / Hide Subtitles
16. Swap Change the HDMI resolution
17. PIP + (optional)
PIP Window Channel Up
18. Mute Mute
19. Used in “Media Browser and EPG” menu
20. (optional) Search backward
21. Used in “Media Browser and EPG” menu
22. (optional) Pause / Timeshift
23. Guide Electronic Program Guide
24. Text Display Teletext
25. V+ / V - Volume UP / DOWN
26. Green Green Teletext function button (used also in “Media Browser”
menu).
27. Red Red Teletext function button (used also in “Media Browser” menu)
28. Aux No function
29. Menu Enter menu / Exit menu
30. Fav Favourite list
31. PIP (optional) Show / Hide PIP window
32. PIP- (optional) Previous channel in PIP window
9
MENU INTERFACE
FIRST TIME INSTALLATION
When the box is opened from stand-by mode and if there is no channel stored in the database, First Time
Installation Menu window is displayed on the screen. In the first window, menu language is asked.
Then, you are asked to choose the country you are located.
After choosing the country, you have to set your TV type in the next window.
The next menu will ask you to choose the HDMI resolution. If you intend just using the Scart output then just
press SELECT and continue the scanning process.
Using the [LEFT] or [RIGHT] buttons on the remote control, you can select between; 576p, 720p and 1080i.
Please check the HDMI resolutions supported by your TV set and select the most appropriate one from this
menu. Afterwards set the antenna supply;
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Walker Ricevitore
