4
proper-sized copper wire.
zPlease instruct the authorized electrician to connect the welder to power supply by
using proper- sized, well-insulated copper wire.
zWhen operating in the damp, space limited area, must ensure well-insulated between
body and work piece
zWhen operating in the high-rising location, must ensure safety by using safe net.
zPlease power off the input voltage while no longer using.
Avoid breathing in hazardous welding fume or gas
zPlease use specified ventilation to prevent being gas poisoned and asphyxiated
zEspecially in the container where oxygen is depleted easily
Avoid being harmed by arc flash, hot spatter and slag
zArc rays can injure your eyes and make your eyes feel uncomfortable.
zHot spatter and slag can burn your skin. Please wear proper welding helmet, leather
gloves, long- sleeved suit, cap, apron and boot before welding.
Preventing from fire, explosion, container break accidents
zDon’t put flammable material in the working area. Hot spatter and hot weld can
easily start a fire.
zCable must be connected the work piece firmly to ensure good conductivity in case
causing fire by resistance heat.
zDon’t weld in the flammable gas or weld container which contains flammable
material, otherwise it can cause explode.
zDon’t weld encapsulated container, otherwise it can cause break.
zEnsuring a fire extinguisher at hand in case fire break out.
Avoid being hurt by moving parts.
zNever let the finger, hair, and cloth near the rotary cooling fan and wire feeder
rollers.
zWhen feeding wire, don’t let the bottom of gun near your eyes, face and body, to
prevent being harmed by wire.
Avoid gas bottle falling or gas regulator breaking
zGas bottle must be firmly fixed on the ground, else if injure will exerts on.
zNever place bottle under high temperature or straight sun light.
zNever let your face near gas outlet while turning on the gas valve to prevent from
being hurt by pressure gas.
zCustomer should use the gas regulator provided by our company, and comply with
the proper instruction.
