Wasserstein Horizontal Angle Mount Manuale utente
Horizontal Angle Mount
USER MANUAL
In the Box
2 x long screws
+ wall anchors
2 x short screws
2 x tiny screws
1 x horizontal
angle mount
Pre-Installation
• We recommend that you use a
magnetic screwdriver.
• Do not install the tiny screw to lock the
Horizontal Angle Mount before
mounting it to the wall.
Compatibility
Google Nest Doorbell (Wired, 2nd Gen)
Page 1
Installation
1. Turn off the power of your doorbell
at the electrical panel.
Note: Always consult a professional
electrician before working with
electrical wires.
2. If a doorbell was previously
installed on your wall, take it
down and disconnect the wires.
3. Open up and carefully pull apart
the wedge and wall plate.
Page 2
Page 3
Note: To install in the opposite
direction, simply flip it over before
mounting.
4. Feed the wires through the
cutout. Attach the mount to the
wall using the long screws and
wall anchors provided (drill bit
size: 1/8 in).
5. Reattach the wedge. Press together
firmly until it clicks into place.
6. Mount the doorbell backplate to
the wedge with the short screws
provided.
Page 4
7. Connect the wires to the doorbell.
Then, attach the doorbell to the
wedge and lock it by securing it
with the screw that came with
your doorbell.
8. Set your doorbell to your preferred
angle and tighten the tiny screws
on the top and bottom of the
mount.
Page 5
9. Turn on the power and check the
Google Home App to make sure
the mount and doorbell have been
installed properly.
Page 6
Get More Support
Scan the QR code below or email us at
This product has been certified by Wasserstein to meet
Google’s compatibility standards. Google is not responsible
for the operation of this product or its compliance with any
applicable safety or other requirements.
Learn more at g.co/madeforgoogle.
Google’s “made for” badge, Google Nest Cam, and related
marks are trademarks of Google LLC.
Made in China
www.wasserstein-home.com
Nest Doorbell (Wired, 2nd Gen)
not included. Google Nest is a
trademark of Google LLC.
Wasserstein is not affiliated with
Google LLC. Wasserstein is a
trademark of Dropcases Ltd.
Montaje en Ángulo Horizontal
MANUAL DEL USUARIO
Contenido de la caja
2 x ltornillos largos
+ anclajes de pared
2 x tornillos cortos
2 x tornillos
pequeños
1 x montaje en
ángulo horizontal
Preinstalación
• Te recomendamos que utilices un
destornillador magnético.
• No instales el tornillo pequeño para
bloquear el montaje en ángulo
horizontal antes de montarlo en la
pared.
Compatibilidad
Timbre Google Nest (cableado, 2nd
generación)
Página 1
Indice
Lingue:
Altri manuali Wasserstein Rack e supporto
Wasserstein
Wasserstein Wall Plate for Wyze Video Doorbell Pro Manuale utente
Wasserstein
Wasserstein Floodlight No-Drill Mount Manuale utente
Wasserstein
Wasserstein Horizontal Adjustable Angle Mount Manuale utente
Wasserstein
Wasserstein 3-in-1 Smart Floodlight, Charger & Mount for Wyze Cam... Manuale utente
Wasserstein
Wasserstein Wall Plate Manuale utente
Wasserstein
Wasserstein Wall Plate for Blink Video Doorbell Manuale utente
