Watchguard NX3CE12 Istruzioni per l'installazione
WatchGuard
XTM 1050
Hardware Guide
XTM 1050
XTM 1050 with Fiber Card
XTM 1050 with 10 Gb Interface Module
NX3CE12
ii WatchGuard XTM 1050
ADDRESS
505 Fifth Avenue South
Suite 500
Seattle, WA 98104
SUPPORT
www.watchguard.com/support
U.S. and Canada +877.232.3531
All Other Countries +1.206.521.3575
SALES
U.S. and Canada +1.800.734.9905
All Other Countries +1.206.613.0895
ABOUT WATCHGUARD
WatchGuard offers affordable, all-in-one network and content security solutions that
provide defense-in-depth and help meet regulatory compliance requirements. The
WatchGuard XTM line combines firewall, VPN, GAV, IPS, spam blocking and URL
filtering to protect your network from spam, viruses, malware, and intrusions. The new
XCS line offers email and web content security combined with data loss prevention.
WatchGuard extensible solutions scale to offer right-sized security ranging from small
businesses to enterprises with 10,000+ employees. WatchGuard builds simple, reliable,
and robust security appliances featuring fast implementation and comprehensive
management and reporting tools. Enterprises throughout the world rely on our
signature red boxes to maximize security without sacrificing efficiency and
productivity.
For more information, please call 206.613.6600 or visit www.watchguard.com.
Copyright and Patent Information
Copyright© 1998–2011 WatchGuard Technologies, Inc. All rights reserved.
WatchGuard, the WatchGuard logo, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use” portion of
the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard Technologies,
Inc. and/or its subsidiaries in the United States and/or other countries. All other trademarks are the property of their
respective owners.
Printed in the United States of America.
Part Number: 275-3231-002 Rev G
Revised: November 8, 2012
U.S. Patent Nos. 6,493,752; 6,597,661; D473,879. Other Patents Pending.
Notice to Users
Information in this guide is subject to change without notice. Updates to this guide are posted at:
http://www.watchguard.com/help/documentation/hardware.asp
Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this guide may be
reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express
written permission of WatchGuard Technologies, Inc.
Complete copyright, trademark, patent, and licensing information can be
found in the WatchGuard product documentation. You can find this
document online at:
http://www.watchguard.com/help/documentation/
Hardware Guide 1
Hardware Specifications
WatchGuard XTM security appliances deliver unparalleled unified threat management, superior performance,
ease of use, and value for your growing network. Our security subscriptions give you fully integrated
protection from spyware, spam, viruses, worms, trojans, web-based exploits, and blended threats. From
firewall and VPN protection to secure remote access, WatchGuard XTM devices support a broad range of
network environments.
This guide introduces the XTM 1050, one in a series of RoHS-compliant (lead-free) hardware product offered
by WatchGuard.
WatchGuard’s high-performance XTM 1050 uses dynamic, multi-layered security to proactively protect your
network. Capable of 10 gigabit throughput, the XTM 1050 has the reliability, redundancy, traffic management,
and port density that demanding, high-speed networks require.
The XTM 1050 has redundant replaceable power supply units, replaceable cooling fans, and offers an available
insertable card with fiber optic interfaces.
Fireware XTM OS
The XTM 1050 devices support WatchGuard’s next generation UTM OS—Fireware® XTM. Each XTM 1050
device includes Fireware XTM with a Pro upgrade and delivers exceptional protection against today's
sophisticated threats to make sure that your business stays connected. Fireware XTM with the Pro upgrade
offers additional advanced networking capabilities. For more information on the features of Fireware XTM OS,
see the current Fireware XTM WatchGuard System Manager Help or Fireware XTM Web UI Help.
2WatchGuard XTM 1050
Hardware Specifications
Package Contents
Instructions to find this Hardware Guide
XTM 1050 appliance
Quick Start Guide
Hardware warranty card
LiveSecurity® Service activation card
1 straight-through Ethernet cable (green)
1 cross-over Ethernet cable (red)
1 serial cable with an RJ-45 connector
2 power cords
1 front rack-mount kit
1 side rail mount kit with installation instructions
1 bag screws
About Your Hardware
Hardware Specifications
Processor Dual 2.33 GHz Quad Core Intel
Xeon
Memory: Flash 1 GB
Memory: RAM 4 GB
Power supply 100-240 VAC
Autosensing
Dimensions D=20.1” (51.0 cm)
W=16.9” (43.0 cm)
H=3.5” (8.8 cm)
Weight 33.5 lbs (15.2 Kg)
Hardware Guide 3
Hardware Specifications
Interface Specifications
Environmental Requirements
We recommend that you use these guidelines to install your XTM 1050 devices safely:
Install in a network rack
Put in a secure area, such as a locked room, to block the device from people who do not have
permission to use it
Connect to a conditioned power supply to prevent damage from sudden power changes
Other environmental requirements:
Network
interfaces
• 14x GbE Copper RJ45, 1000Base-T, 100Base-TX, or 10 Base-T (10/100/
1000Mbps)
• Includes 10x fixed ports, 4x on removable module
• Interfaces 12 and 13 are labeled Management
Ethernet Fiber
Option
(replaces 4 of the 14
RJ-45 ports)
• 4 GbE SFP Module replaces standard 4x Copper module
• Includes 4x 1000BaseSX Optical Transceivers
– 850 nm Vertical Cavity Surface Emitting Laser (VCSEL)
– LC-Duplex Fiber Connector
10 Gb Interface
Module
(replaces 4 of the 14
RJ-45 ports)
• 10 Gb Interface Module replaces standard 4x Copper module
• Includes 2x 10Base-SR 850nm Multimode SFP+ transceivers
– Each interface operates at 10Gb only
I/O interfaces • 2x USB
• 1x Serial RS232 RJ45
Operating temperature 0–40°C
(32 – 104°F)
Operating humidity 10%–85%
Non-operating
temperature
–40 – 70°C
(–40 – 158°F)
Non-operating humidity 5%–95% Non-condensing
at 55°C (131°F)
Acoustic noise 63 dB at 20°–25°C
4WatchGuard XTM 1050
Hardware Specifications
Hardware Description
Front View
The entire front of the device:
A close-up of the front left side of the device:
LCD indicator panel
Device status information appears on the LCD screen. Press the buttons to the right of the screen to
change the information that appears on the screen.
For more information, see “Use the LCD Interface” on page 10.
LCD console buttons
Press the LCD console buttons to see status information and start recovery procedures.
To boot the device in safe mode, press and hold the down arrow button when you power on the
device.
For detailed information about the LCD indicator panel and the LCD console buttons, see “Use the
LCD Interface” on page 10.
Power
When the device is powered on, the power indicator is green.
Arm/Disarm
When the device is armed, this indicator is green. When the device is disarmed, this indicator is red.
Hard disk bay
Reserved for possible future use.
Serial port (Console)
An RJ-45 connector for the serial port.
Dual USB Port
Connect a USB storage device to use for USB backup and restore, or to store a support snapshot.
For more information about USB functions, see the Fireware XTM WatchGuard System Manager Help
or Fireware XTM Web UI Help.
Hardware Guide 5
Hardware Specifications
A close-up of the right side of the XTM 1050:
The indicators and connectors are:
Interface ports
The XTM 1050 has a total of 14 interface ports. Interface ports have standard RJ45 connectors.
Interface ports 0 - 11 are labeled 0, 1, 2, 3...11.
Interface ports 12 and 13 are not numbered. These ports are labeled Management. For these ports,
the left interface port is number 12, and the right interface port is number 13.
Indicators for numbered RJ45 interfaces
At the bottom of each numbered RJ45 interface, there is a pair of indicators. The indicator at the left
of the interface is the activity indicator for that interface. The indicator at the right shows the
connection speed for that interface.
Indicators for RJ45 interfaces labeled Management
At the top of each RJ45 interface labeled Management (interface ports 12 and 13), there is a pair of
indicators. The indicator at the left of the interface is the activity indicator for that interface. The
indicator at the right shows the connection speed for that interface.
Indicator Indicator color Interface Status
Activity (lower left) Green Power on, connection established
Not lit Power off, no connections
Blinks
(speed of blink increases as the
data flow increases)
Data sent and received
Connection Speed
(lower right)
Not lit Operates at 10 Mbps
Green Operates at 100 Mbps
Yellow Operates at 1000 Mbps
Indicator Indicator color Interface Status
Activity (upper left) Green Power on, connection established
Not lit Power off, no connections
Blinks
(speed of blink increases as the
data flow increases)
Data sent and received
Connection Speed
(upper right)
Not lit Operates at 10 Mbps
Green Operates at 100 Mbps
Yellow Operates at 1000 Mbps
6WatchGuard XTM 1050
Hardware Specifications
Interface ports available with the optional fiber card
If you install the optional fiber card for the XTM 1050, it replaces the four copper interface ports
numbered 8–11. There is an activity link indicator for each fiber port, but the location of the activity
indicator is different from the location of the activity indicators for ports 0-7. See the diagram below
for the location of the fiber activity indicators for each port.
Interface ports available with the optional 10 Gb Interface Module
If you install the optional 10 Gb Interface Module for the XTM 1050, it replaces the four copper
interface ports numbered 8–11 with two interface ports numbered 8 and 9. There are activity and
connection speed indicators for each 10 Gb interface port, but the location indicators is different from
the location of the indicators for ports 0-7. See the diagram below for the location of the activity and
connection speed indicators for each port on the 10 Gb Interface Module.
For each interface port on the 10 Gb Interface Module:
oThe Activity LED blinks when data is sent or received.
oThe Connection LED is blue when the interface operates at 10 Gb.
Note
After you install the 10 Gb Interface Module, interfaces 10 and 11 are still visible in the device
configuration, but are unused, even if you configure them in the management software.
Activity LED 8
Activity LED 9
Activity LED 10
Activity LED 11
Activity Indicator Locations on the XTM 1050 Fiber Card
Activity LED 8
Connection LED 8
Activity LED 9
Connection LED 9
Indicators on the 10 Gb Interface Module
Hardware Guide 7
Hardware Specifications
Rear View
The rear view of the XTM 1050 shows the AC receptacle, replaceable fans, replaceable and redundant power
supplies, and power switch.
Replaceable fans
The three fans decrease the internal temperature of the device. It is not necessary to power off the
XTM 1050 to replace a failed fan.
AC receptacles on each power supply
Each AC receptacle accepts a detachable AC power cord supplied with the XTM 1050. Each power
supply for the device is a WatchGuard standard auto-sensing AC power supply.
Replaceable power supply and power switch
There are two power supplies on the XTM 1050, each with their own power indicator light. The power
switch activates both power supplies. It is not necessary to turn off the XTM 1050 to replace a failed
power supply.
If one of the power supplies fails, the green power indicator light for that power supply goes out and
an audible alarm will sound.
Caution
You must disconnect both power supplies before you remove the cover of the XTM 1050 for
any reason.
Alarm reset button
If either of the two power supplies fail for any reason, an audible alarm will sound. Push the red reset
button to stop the audible alarm.
Alarm Override
XTM 1050 Rear Power Indicator Lights and Alarm Override
Power Lights
8WatchGuard XTM 1050
Hardware Specifications
Rack Mount Instructions
Each WatchGuard XTM 1050 device ships with a 29” rack mount kit and a set of installation instructions. When
you install the XTM 1050 in a rack, make sure you consider:
Elevated Operating Ambient Temperature
If you install the XTM 1050 in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than room ambient. The XTM 1050 is certified
to operate correctly between 32–104°F or 0–40°C.
Reduced Air Flow
When you install the XTM 1050 in a rack, make sure that the amount of air flow required for safe
operation of the equipment is not compromised.
Mechanical Loading
When you mount the XTM 1050 in the rack, avoid hazardous conditions caused by uneven
mechanical loading.
Circuit Overloading
Make sure you connect the XTM 1050 to the power supply circuit in such a way that there is no
overloading of the circuits, and no impact on overcurrent protection and supply wiring.
Reliable Grounding
Make sure all rack-mounted equipment is correctly grounded. For example, make sure you use power
strips instead of direct connections to the branch circuit.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Watchguard Interruttore
Watchguard
Watchguard XTM 1520 Istruzioni per l'installazione
Watchguard
Watchguard Firebox M4600 Guida di riferimento
Watchguard
Watchguard XTM 3 Series Istruzioni per l'installazione
Watchguard
Watchguard Firebox M370 Manuale utente
Watchguard
Watchguard ALMKIT-D1 Manuale utente
Watchguard
Watchguard Firebox M4600 Manuale utente
