WATCHMARK WM18 Manuale utente
OPERATING INSTRUCTIONS
WWW.WATCHMARK.COM
TABLE OF CONTENTS
Introduction
About the watch 4
Device configuration
Packaging content
Hardware requirements
Charging the watch
Additional information
How to wear the WM18 7
Changing the band 8
App and functions
Installing applications 9
What you can do
on your smartwatch 10
Heart rate
Body temperature
ECG
Respiratory rate
Sleep monitor
Notifications/messagesStop
watch
Stoper
Instrument control
Weather
Sports modes
Reset to factory settings
Time, date
Pedometer
Brightness control
Calorie counter
Distance
Blood pressure
Saturation
11
5
6
12
13
14
15
APPLICATIONS AND FUNCTIONS
Apps and functions
TABLE OF CONTENTS
Technical data
General Information
19
20
Product complaints
Product return 21
Product exchange 23
Features available within
the app 16
Blood pressure monitor
calibration
Automatic heart rate
detection
Notifications
Alarm clock
Do not disturb" mode No
motion
Care function
Find phone
ECG measurement
Alarm settings
17
18
19
Apps and Features
Introduction
About the WM18 watch
The WM18 smartwatch is a premium model that has been
designed with your health in mind. The device has features such
as a heart rate monitor, blood pressure monitor, pulse oximeter,
thermometer, ECG measurement and sleep monitor. It has the
latest generation Texas Instruments AFE Ti4404 chip built in for
accurate pressure measurement, sports modes and the ability to
display notifications from social apps.
Device configuration
Packaging content
Smartwatch (colour and
material may vary depending on
the colour chosen)
Smartwatch strap (colour and
material may vary depending
on the colour selected)
Charger (colour and material may vary
depending on the model selected)
4
iOS 8.2 and above
Android 4.4 and later
Bluetooth supported: 4.0
Hardware requirements
Charging instructions
This smartwatch uses magnetic charging.
Connect the charging cable to the USB input and to the rear
charging pins of the device. Once connected, charging will start
automatically and the charging icon will appear on the screen.
It takes approximately 2 hours to fully charge the battery. Do not
use the watch while it is charging.
Caution: do not connect the magnetic charging cable to any
2 contacts at the same time with conductive material, as this
may cause a short circuit.
Android 4.4+ IOS 8.2+
5
Please read the entire user manual carefully before using the
equipment. It is recommended to use only the original battery,
charger and accessories that are included in the kit received
with the equipment.
Neither the manufacturer nor the distributor is responsible for
the use of third-party accessories.
The functions that are presented in this manual may vary
between models, as the manual is a general description of
smartwatches. Some models may deviate from the standard.
Before using the device for the first time, charge it for a
minimum of 2 hours. Before using the device, you must
download and install the app and accept all consents that the
smartwatch asks for. If this is not done fully, not all features of
the device will be available. The smartwatch will only ask for
access to functions that are necessary for the smartwatch to
function properly.
The company reserves the right to change the content of this
manual.
6
Additional information
How to wear the WM18?
The band for this watch model is 22mm wide. It is
interchangeable and additional straps in a different colour or
material can be purchased for it.
Wearing the watch
When you are not exercising, wear the WM18 like a normal
watch, i.e. one finger above your wrist bone.
To get the most out of the heart rate monitoring function
during exercise, try wearing the device above your wrist (2
fingers above your wrist bone) to improve comfort and
stability. Many exercises, such as cycling or weightlifting, can
cause the smartwatch's placement to change by bending the
wrist, for example. If the watch sits lower on the wrist bone
measurements can be intermittent, so correct placement is
important.
7
Replacing the strap
Insert one end of the strap with the telescope into the
cavity of the WM18 Plus watch envelope.
With the other end, insert the telescope into the centre of
the cavity and attach to the watch.
Attach the original strap to the watch before using it. When
carrying out this operation, take great care and be careful
with your fingernails when attaching the telescopic straps to
the watch.
1.
2.
Attaching the strap
Removing the strap
On one side, press the wheel on the telescope and
gently push inwards.
Then, pull upwards until the telescope detaches from the
watch.
1.
2.
8
Apps and Features
Installing applications
The app for the WM18 Plus smartwatch model is
"SmartHealth". Download the app from the Google Play / App
Store or via the QR code below.
Once the app is installed, turn on Bluetooth on your phone and
navigate to the app. For the app to work properly, you will need to
give all the consents the app asks for. Fill in your personal details
- go to "Settings" in the bottom right corner, then select the icon
with your email address. To connect the watch, in the bottom
corner click:
"Settings" and then "Device status". Your phone will search for
Bluetooth devices and you should select the appropriate model
(M18 Plus).
9
Functions available on the Smartwatch
Time, date, day of the week
Pedometer
3 steps adjustment of the screen backlight brightness
Calorie counter*
Distance travelled
The display shows the time, date and day of the week. The
data is displayed on the main screen of the watch.
Counts the steps taken on a given day (data resets each day
from 00:00). The number of steps taken can be seen in the app
or on the main screen of the watch.
The 3-step brightness adjustment helps protect your eyes from
an overly bright screen at night and saves the watch's battery.
You can find this function in the settings of the smartwatch and
select the appropriate brightness of the display.
Calculates the number of calories burned in a given day. The
data on calories burned can be found on the home screen in
the watch and app.
Information on how much distance was covered during the day.
The distance travelled can be found in the first tab to the right
of the home screen. The number of steps walked and calories
burned can also be found in this tab.
10
Indice
Altri manuali WATCHMARK Orologio
