WaterLogic CUBE FIREWALL Manuale utente

Waterlogic Commercial Products, LLC

11710 Stonegate Circle

Omaha, NE 68164

(800) 288-1891 www.waterlogic.us

Tech Portal Website: www.techportal.waterlogic.com

WLI (UK) LTD – Global Headquarters Grenfell Road, Maidenhead, Berkshire, SL6 1HN, United Kingdom

CUBE Firewall

MANUAL

CUBE Manual Page 2 - Revision: 5-24-2017

CUBE MANUAL

Congratulations on your choice of the Waterlogic CUBE Water Treatment System. The CUBE is a fully

programmable self-contained model that dispenses ambient, cold, hot, and extra-hot water. Every

CUBE includes:

High Performance Multi-Stage Filtration

Bio-Cote Anti-Microbial Protection

Firewall Advanced Purification

The Waterlogic CUBE Water Treatment System provides exceptional quality and great tasting water

with every use.

INTRODUCTION

Carefully read and follow all instructions to ensure proper and efficient operation of your CUBE Water

Treatment System. Contact Waterlogic or an Authorized Waterlogic Dealer if you have any questions.

Waterlogic and Authorized Waterlogic Dealers employ trained service personnel who are experienced

in the installation, function and repair of Waterlogic equipment. This publication is written for use by

these qualified individuals. Waterlogic encourages users to learn about products, however, we believe

that product knowledge and service is best obtained by consulting Waterlogic or an Authorized

Waterlogic Dealer.

Waterlogic Water Treatment Systems should be combined with selected water treatment components

to create a system specifically tailored for each application by trained and qualified personnel.

Products manufactured and marketed by Waterlogic and its affiliates are protected by patents issued or

pending in the United States and other countries.

Waterlogic reserves the right to change the specifications referred to in this literature at any time,

without prior notice. Changes or modifications not expressly approved by Waterlogic could void the

warranty and user’s authority to operate the equipment.

CUBE Manual Page 3 - Revision: 5-24-2017

TABLE OF CONTENTS

USER GUIDE

•Safety Alert Symbols .........................................................................4

•Safety Precautions ............................................................................4

•Features and Benefits .......................................................................6

•Certifications .....................................................................................7

•Model Designations and General Specifications ..............................8

•Electrical and Shipping Specifications...............................................9

•Operating Instructions ....................................................................10

•Warranty ........................................................................................12

SERVICE GUIDE

•PCB LED Codes ................................................................................13

•Consumable Components...............................................................14

•Service Requirements .....................................................................15

•Hot Tank Principles of Operation....................................................16

•Resetting the Hot Tank Overload (High Limit Safety) .....................17

•Hot Tank Descaling..........................................................................19

•Filter Replacement..........................................................................25

•UV Lamp Replacement....................................................................28

•Quartz Spiral Replacement .............................................................30

•Bypassing Cover Pin ........................................................................35

•Programming – Energy Saving Sleep Mode ....................................36

•Programming – Cold Water Temperature ......................................37

•Programming – Hot Water Temperature........................................37

•Programming – Filter Replacement Timing ....................................38

•Programming – Reset Filter Service Timer......................................39

•Programming – UV Settings ............................................................40

•CUBE Drawings and Parts List…………………… ...................................41

•Flow Diagram ..................................................................................47

•Electrical Schematic ........................................................................48

INSTALLATION GUIDE

•Pre-Installation Procedures.............................................................49

•Draining Procedure .........................................................................54

•Installation Instructions ..................................................................55

TROUBLESHOOTING GUIDE

•Fault Codes......................................................................................59

•Power Troubleshooting...................................................................68

•Dispense Troubleshooting ..............................................................70

•Cold Water Troubleshooting...........................................................79

•Hot Water Troubleshooting ............................................................81

•Taste / Odor Troubleshooting.........................................................85

CUBE Manual Page 4 - Revision: 5-24-2017

SAFETY ALERT SYMBOLS

Read and follow all safety information carefully. The signal words used in this manual are selected as

shown below and based on an assessment of the degree of potential injury or damage (severe or minor)

and the occurrence of injury (definitely occurs or has the potential to occur) when the warning is

ignored:

DANGER!

Indicates a situation which, when not avoided, results in death or severe injury.

WARNING!

Indicates a situation which, when not avoided, has the potential to result in death or severe

injury; and/or severe property damage.

CAUTION!

Indicates a situation which, when not avoided, results or has the potential to result in minor

injury; and/or minor property damage.

SAFETY PRECAUTIONS

Basic safety precautions should be followed, including the following:

Ensure all local, state, and federal laws and codes including health and safety guidelines are met when

installing Waterlogic Equipment. Only qualified service technicians should attempt installation and

service of Waterlogic Equipment. Always read the entire operating instructions before using the

appliance and save these instructions for future use.

DANGER! ELECTRICAL SHOCK HAZARD. Always use a dedicated and properly grounded outlet. Unit

should be protected by ground-fault circuit interrupter (GFCI) or residual current device (RCD) having

a rated residual operating current not exceeding 30mA. Use only Waterlogic supplied power cord.

Never use extension cords or power strips to connect unit. Do not use if the power supply cord is

damaged. Always unplug from power supply prior to servicing.

WARNING! AUTHORIZED USE ONLY. This appliance is to be used for its intended purpose as

described in this manual, and untrained individuals who use this manual assume the risk of any

resulting property damage or personal injury. This appliance can be used by children aged from 8

years and above and persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

WARNING! SUPERVISE CHILDREN.Keep appliance and cord out of reach of children under the age of

8 years. Children under the age of 8 years must not use or play with the appliance.

WARNING!DO NOT OPERATE IF DAMAGED. Unplug if abnormal case occurs. Contact Waterlogic or

authorized dealer for repair, service, and installation to avoid hazards.

CUBE Manual Page 5 - Revision: 5-24-2017

WARNING! HOT WATER. Unit produces Hot Water in excess of 87oC (188oF). Water above 52oC

(125oF) can cause severe burns or scalding. Keep unauthorized people and children away from the

unit to avoid accidental dispensing of hot water.

WARNING! CONNECT TO POTABLE WATER SUPPLY. This system is to be used for water only and is

not intended for use where water is microbiologically unsafe or with water of unknown quality

without adequate disinfection. System is designed for the supplemental bactericidal treatment of

public drinking water, or other drinking water, which has been tested and deemed acceptable for

human consumption by the state or local health agency having jurisdiction. The system is designed to

reduce normally occurring non-pathogenic or nuisance microorganisms only. System is not intended

for treatment of contaminated water.

WARNING! STORE AND TRANSPORT UNIT EMPTY. ALWAYS SANITIZE BEFORE USE.

The unit must be completely drained and sealed before storing to avoid stagnation and reduce

microbiological contamination (potential bacterial growth). Sanitize before use to eliminate any

potential microbiological contaminates

CAUTION! INDOOR USE ONLY. Intended for household use only.Never expose to direct sunlight,

heat sources, or ambient air temperature above 37°C (100°F) or below 2°C (35°F). Install indoors and

keep unit away from excessive humidity. Never expose to freezing temperatures. Ensure there is

adequate clearance around the unit to allow refrigeration system condenser to dissipate heat.

Warmer environments require more clearance around the unit. Minimum clearance around all

surfaces of the machine is 2-inches. Installs where the ambient temperature exceeds 27°C (80°F),

require a minimum of 4-inches clearance for proper heat dissipation and efficient operation.

CAUTION! USE A WATER PRESSURE REGULATOR. Waterlogic will not be responsible for injury or

damage caused by excessive water pressure. Input or feed pressure must be 40 psi to 60 psi. Be

aware of any potential pressure surges caused by building/municipal pumping stations. Water block

devices and external leak detectors are strongly recommended. Locate the unit as close to the water

supply and the electrical connections as possible to minimize risk.

CAUTION! USE PROPER SUPPLY LINES AND FEED WITH POTABLE AMBIENT WATER ONLY.

Feed water over 37°C (100°F) may damage the treatment components. Always use supply lines with

adequate pressure rating and UV resistance. Close water supply valve and contact service

representative if a leak is noticed.

Contact Waterlogic for assistance or help finding an Authorized Service Representative.

CUBE Manual Page 6 - Revision: 5-24-2017

CUBE FEATURES AND BENEFITS

Ambient, Cold, Hot, and Extra Hot Water

Pressure Fed Ambient, Cold, Hot, and Extra Hot Selections to meet a wide range of customer demands.

Volume Storage and Water Capacity

1.4 liters of Cold, 1.3 liters of Hot Water Storage.

BioCote®Anti-Microbial Protection

Certain plastic, silicon, and painted surfaces surrounding the dispensing areas and drip

tray are infused with an exclusive additive called BioCote®. BioCote® provides an

effective barrier against microbes like bacteria and mold, which may cause odors or

staining.

Large Dispense Area with Recessed Faucet

6.4 inch dispense height with BioCote® recessed faucet to protect from cross-contamination.

Digital Display

The CUBE Water Treatment System has an innovative user interface utilizing a LCD display for easy use

and programming.

Advanced Programming

Customizable settings for optimizing each CUBE Water Treatment System including; Cold Temp Set Point,

Hot Temp Set Point, UV Timer, Filter Timer Setting, Filter Life Monitor, Sleep Mode, and Default

Selection Mode.

Energy Saving Sleep Mode

Energy Saving Sleep Mode can be programmed to turn off Heater after 3 hour or 72 hours of inactivity.

Filter Timer

Selection includes the choice of 3 different filter replacement settings variations programmed for 3, 6 or

12 months. The Filter Timer also has an open to be turned off.

Firewall™

Firewall is proprietary technology that places the UV lamp at the point of dispense.

This point of dispense purification keeps the dispense nozzle free from external

contamination as well as purifying the water, making the freshest water possible.

Child Safeguard

CUBE Water Treatment System requires selection followed by main dispense and defaults back to cold

water selection after 3 seconds of inactivity to prevent accidental dispensing of hot water.

Leak Sensor and Alarm

Leak Sensor and Alarm Full Fault Mode that halts supply to prevent overflow and sounds alarm to

reduce accident potential.

CUBE Manual Page 7 - Revision: 5-24-2017

CUBE CERTIFICATIONS

Waterlogic Water Treatment Systemshave been tested, and certified to rigorous NSF and UL

Standards. We believe that performance testing and certifications validate Waterlogic as a world-

leader in water treatment systems.

CUBE Water Treatment System Certifications Include

NSF/ANSI-55 Class A –Ultraviolet Microbiological Water Treatment Systems

Water Quality Association is an international standards organization. Firewall™ Technology

contains our latest, most innovative and patented breakthrough, “The Firewall™”, the most

comprehensive UV purification system for point-of-use water treatment systems ever

developed. The Waterlogic Firewall components has been tested and certified by the Water

Quality Association (WQA) to NSF/ANSI-55 Class A – Ultraviolet Microbiological Water

Treatment Systems, and to NSF/P231 and the USEPA Standard for Microbiological Water

Purifiers.

NSF P231 –Protocol for Microbiological Purifiers

The Public Health and Safety Organization establishes minimum requirements for health and

sanitation characteristics of microbiological water purifiers. The requirements are based on

the recommendations of the U.S. Environmental Protection Agency's Task Force Report.

NSF/ANSI-42 – Chlorine, Taste and Odor Reduction

NSF/ANSI-53 – Lead and Cyst Reduction

The Public Health and Safety Organization establishes minimum requirements for materials,

design, construction, and performance of drinking water treatment units that are designed

to reduce specific aesthetic-related contaminants in public or private water supplies.

UL399 – Certified Drinking Water Cooler

Intertek Labs (ETL) Certified the CUBE Water Treatment System to ANSI/UL 399 Standard for

Drinking Water Coolers.

BPA Free - Waterlogic tests for BPA and declares that all of its products are Bisphenol-A

FREE and contain no harmful BPA plastics.

Waterlogic is certified to ISO 9001:2015 – Quality Management Systems

(certified by Intertek). ISO 9001 is the internationally accepted standard

for well managed organizations that have adopted the key quality

management principles to its operations to bring consistent quality

products and a culture of continuous improvement.

Safe Drinking Water Act

Waterlogic water treatment systems conform to the Safe Drinking Water Act (SWDA) “lead-free”

amendment effective January 4, 2014.

CUBE Manual Page 8 - Revision: 5-24-2017

MODEL/PART DESIGNATIONS

BRAND NAME DESCRIPTION

CUBE Water Treatment System

Waterlogic CUBE – Ambient, Cold, Hot, and Extra Hot

Model F-FWCU1-M-HCA-TT-SB-IN1

Serial Number Prefix: 81

SPECIFICATIONS

ITEM

Water ¼” Quick Connect

Cold Water Temperature

Cold Water Temperature – Factory Set Point 41°F - 5°C

(Adjustable) 34°- 54°F. (1.1° - 12.2°C)

Cold Water Capacity 1.4 Liter Cold Tank

Hot Water Temperature

Factory Set Point 187°F (86C°)

Programmable 158° - 203°F (70° - 95°C)

Hot Water Capacity 1.3 Liter Hot Tank

Extra Hot Water Temperature Extra Hot Water Temperature – Factory Set Point 203°F (95C°)

Hot Tank Manual Reset Overload 221°F (105°C)

Maximum Working Pressure 60 psi (414 kPa) – Use Pressure Regulator

Environmental Temperature

35° - 100°F (2° - 37°C)

Refrigerant Gas R134a – 1.94 oz. (55 grams) - Hi (280 psi) Low (90 psi)

R134a Pressures High (230 psi), Low (90 psi)

CUBE Manual Page 9 - Revision: 5-24-2017

SHIPPING SPECIFICATIONS

ITEM

SPECIFICATION

Width/Depth/Height #14 in (356 mm), 19 in (483 mm) x 17 (432, m). #

Weight – Dry (w/o packaging) 30 lb. (15 kg)

Shipping Information

(length x width x height)

20 in. x 22 in. x 22 in.

8 units per pallet

Shipping Weight – Dry 41 lb. (19 kg)

ELECTRICAL SPECIFICATIONS

ELECTRICAL SUPPLY 120V/60Hz 15 Amp Service+

COMPONENT POWER (approximate) AMP DRAW (approximate)

Heater 500 Watts 4.2 Amps

Compressor 210 Watts 1.75 Amps

UV Lamp System 13 Watts 0.11 Amps

CUBE TOTAL 732 Watts 6.06 Amps

#CUBE is 17 inches tall and may not fit between countertops and cabinets - Check installation to ensure adequate clearance.

CUBE Manual Page 10 - Revision: 5-24-2017

OPERATING INSTRUCTIONS

The above picture shows front LCD display and control panel for the Waterlogic CUBE Water Treatment

System.

Button Operational Use

Select Cold Water Selection + Press and Hold Dispensing Button to start

dispensing until desired fill.

Select Ambient Water Selection + Press and Hold Dispensing Button to

start dispensing until desired fill.

Hold for 3 seconds

Press and Hold Hot Water Selection for 3 seconds, until the Hot Water

Icon is illuminated. Press + Press and Hold Dispensing Button until

desired fill. The delay is a safety feature that prevents hot water from

being accidently dispensed.

Hold until

Extra Hot Selection button

stops flashing – indicates the

temperature has been reached.

Press and Hold Extra Hot Water Selection. The Extra Hot Selection

Button will flash red to indicate the water is heating. When the red

flashing icon turns off, this indicates that the water is to the

temperature.

Press the Hot Water Selection Button + Press and Hold Dispensing Button

until desired fill.

WARNING! Unit produces Very Hot Water up to 203°F. Water above

125°F can cause severe burns or scalding. Keep unauthorized people

and children away from the unit to avoid accidental dispensing of

hot water. Children should not use without supervision.

Indice

Altri manuali WaterLogic Distributore

WaterLogic

WaterLogic WL900 Manuale utente

WaterLogic

WaterLogic PUREZZA CLASSE Manuale utente

Manuali Distributore popolari di altre marche

Silver King

Silver King Majestic SK12MAJ Guida rapida

Franke

Franke F3Dn Twin Manuale utente

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Manuale utente

DAN DRYER

DAN DRYER 282 Manuale utente

Essity

Essity Tork 473208 Manuale utente

CBS

CBS SD300BU-88 Guida all'installazione

Sealey

Sealey MK77 Manuale utente

Fluid Management

Fluid Management Accutinter 1600 Manuale utente

Franke

Franke DVS SD99-010 Manuale utente

Graco

Graco Dispensit 1053-10C Guida alla risoluzione dei problemi

ITALTINTO

ITALTINTO i50 Manuale utente

Coca-Cola

Coca-Cola FREESTYLE 9000 Manuale utente

Graco

Graco ProMix 2KE Manuale di istruzioni

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Manuale utente

Wayne

Wayne GLOBAL VISTA CNG Manuale utente

clarsen

clarsen H133 Manuale utente

PicoBrew

PicoBrew Zymatic Manuale utente

BOWMAN

BOWMAN BP-007 Manuale utente