Waters Network Systems PSL1008-MSC Manuale utente

OPERATING MANUAL

PSL1008 and ES1008 Switch

Switch with Eight 10/100Base-TX Ports

Plus One Fiber 100Base-FX Port

PSL1008-TX

PSL1008-MSC

PSL1008-MST

PSL1008-MTRJ

PSL1008-SSC-30

ES1008-TX

ES1008-MSC

ES1008-MST

ES1008-MTRJ

ES1008-SSC-30

CORPORATE HEADQUATERS MANUFACTURING/CUSTOMER SERVICE

5001 American Blvd. W., Suite 605 945 37th Avenue, NW

Bloomington, MN 55437 Rochester, MN 55901

Phone: 800.441.5319 Phone: 800.328.2275

Phone: 952.831.5603 Phone: 507.252.1951

Fax: 952.831.5605 Fax: 507.285.1952

Web site: http://www.watersnet.com

Waters Network Systems User’s Manual Page 2

PSX/ES1008 Models

Table of Contents

1.0 Specifications .........................................................................................3

2.0 Package Contents ..................................................................................5

3.0 Introduction ............................................................................................5

3.1 Hardware Features................................................................................... 6

3.2 Hardware Description............................................................................... 7

3.3 LED Indicators.......................................................................................... 7

3.4 Desktop Installation .................................................................................. 8

3.41 Attaching Rubber Feet ............................................................................. 8

3.42 Power On ................................................................................................. 9

4.0 Network Applications............................................................................. 9

4.1 DIP-Switch Setup ................................................................................... 10

5.0 Troubleshooting ...................................................................................12

6.1 Before Calling for Assistance ................................................................. 12

5.2 Return Material Authorization (RMA) Procedure .................................... 13

5.3 Shipping and Packaging Information...................................................... 14

6.0 Warranty................................................................................................15

Waters Network Systems User’s Manual Page 3

PSX/ES1008 Models

1.0 Specifications

OPERATIONAL CHARACTERISTICS:

MAC Address Table: 2k

Switching Mode: Store-and-forward

Memory Buffer Size: 768kb

Performance: Non-blocking wire speed

Dip switch for full and half duplex setting

Dip switch for VLAN setting on fiber models

NETWORK STANDARDS:

IEEE 802.3

IEEE 802.3u

IEEE 802.3x

IEEE 802.3 (N-way auto negotiation)

EMI/SAFETY COMPLIANCE:

FCC Class A, CE, UL cUL

NETWORK CABLE CONNECTORS

RJ45 shielded female ports

10/100Mbps: CAT5 UTP or better

Multimode: SC

POWER SUPPLY:

Input Voltage

110 to 240 VAC, 50 to 60Hz

Power Consumption

7.5 watts maximum

OPERATING ENVIRONMENT:

Ambient Temperature:

32° to 113°F (0° to 45°C)

Storage:

-40° to 158°F (-40°to 70°C)

Ambient relative humidity:

10% to 90% (non-condensing)

Waters Network Systems User’s Manual Page 4

PSX/ES1008 Models

MECHANICAL:

Enclosure:

Rugged high-strength sheet metal suitable for stand-alone, wall or tabletop

mounting

Cooling Method: Convection cooled

PHYSICAL CHARACTERISTICS:

PSL1008 Dimensions:

9.75 x 5.25 x 1.5 in (165 x 92 x 25mm)

Weight:

2 lb (.91kg)

ES1008 Dimensions:

16 x 11 x 1.75 in (406 x 279 x 37.5mm)

Weight:

3.7 lb (1.68kg)

Waters Network Systems User’s Manual Page 5

PSX/ES1008 Models

2.0 Package Contents

Examine the shipping container for obvious damage prior to installing this product.

Notify the carrier of any damage that you believe occurred during shipment. Ensure

that the items listed below are included. If an item is missing, please contact your

supplier.

The 1008 switch package contains the following:

1008 Switch

Power Cord

Four Rubber Feet

User’s Guide

3.0 Introduction

In our modern society, communication and sharing information is essential to our lives.

Computer networks have proven to be one of the fastest methods of communication.

The 1008 series of switches are compact desktop switches that are the ideal solution

for any network user. The 1008 series of switches provide high-performance switching

functions with low-cost connectivity. The 1008 switches feature store-and-forward

switching and will auto-learn and store source addresses with a 2K-entry MAC

address table.

Figure 3-1. PSL-1008-MSC

The base model 1008 switch provides 8 10/100Base-TX RJ45 ports while the 9-port

models offer an optional 100Base-FX fiber port with SC, ST or MRRJ connectors.

An additional model is offered with a 30km singlemode fiber port. The switch will

automatically detect the speed of connected devices to accommodate both 10 and

100Mbps. The 10Mbps bandwidth will accommodate 10Mbps workgroup switches

Waters Network Systems User’s Manual Page 6

PSX/ES1008 Models

while simultaneously providing the 100Mbps bandwidth required for multimedia

applications. All RJ45 ports support Auto MDI/MDIX.

Ethernet switching technology dramatically boosted the total bandwidth of a network,

eliminated congestion problems inherent with the carrier sense multiple access with

the collision detection (CSMA/CD) protocol and greatly reduced unnecessary

transmissions.

This revolutionized networking. First, by allowing two-way, simultaneous

transmissions over the same port (full-duplex), bandwidth was essentially doubled.

Second, by reducing the collision domain to a single switch-port, the need for carrier

sensing was eliminated. Third, by using the store-and-forward technology’s approach

of inspecting each packet to intercept corrupt or redundant data, switching eliminated

unnecessary transmissions that slow down network traffic.

Auto-negotiation regulates the speed and duplex of each port, based on the capability

of both devices. Flow-control allows transmission from a 100Mbps node to a

10Mbps node without loss of data. Auto-negotiation and flow-control may have to be

disabled for some networking operations that involve legacy equipment. Disabling the

auto-negotiation is accomplished by hard setting the speed or duplex mode of a port.

3.1 Hardware Features

Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet Standards

Auto-sensing 10/100Base-TX RJ45 port ports

Automatic MDI/MDIX crossover for each 10/100Base-TX port

Nine-port model includes one fixed 100Base-FX port (SC, ST or MTRJ

connector)

Dip switch for full and half duplex mode

Dip switch for VLAN setting

Store-and-forward switching architecture

Automatic address learning, address migration

2K-entry MAC address table

768kb memory buffer sharing

Performs non-blocking full wire speed

Waters Network Systems User’s Manual Page 7

PSX/ES1008 Models

3.2 Hardware Description

Front Panel

The Front Panel of the fiber 1008 switch consists of 8 auto-sensing 10/100Mbps RJ45

ports and one 100-BaseFX fiber. The LED indicators are also located on the front

panel of the switch.

Figure 3-2 PSX-1008-MSC Switch

The front panel is displayed as below.

Figure 3-3. Front Panel of the PSX-1008-MSC Switch

Rear Panel

A three-pronged AC power plug is located on the rear panel of the switch. The 1008

switches work in the range 100-240V AC, 50-60Hz.

Hardware Ports

Eight 10/100 auto MDI/MDIX 10/100Base-TX connections. MDI allows

you to connect to another hub or switch and MDIX allows you to connect

to a workstation or PC. Therefore, Auto MDI/MDIX means that you can

connect to another switch or workstation without a crossover cable.

Fiber model provides one 100Base-FX port (SC, ST or MTRJ connector)

3.3 LED Indicators

There are two LED-Indicators (LNK/ACT and FDX/COL) for each of the eight

10/100Base-TX copper ports. The following table provides the status and description

of the LEDs. The LEDs provide a real-time indication of systematic operation status.

Waters Network Systems User’s Manual Page 8

PSX/ES1008 Models

The following table describes the function of the LED indicators:

Ethernet Port

LED Satus Color Description

Power On Green Power On

On Green The port is connecting with the device

Blinks Green The port is receiving or transmitting

data.

LNK/

ACT

Off . No device attached

On Orange

The port is operating in full-duplex

mode.

Blinks Orange Collision of packets occurs in the port.

FDX/

COL

Off No device attached or in half-duplex

mode.

Table 3-1. LED Description

3.4 Desktop Installation

Choose a surface for your switch that is clean, smooth, level, sturdy and with a power

outlet nearby. Make sure there is enough clearance around the switch to allow

attachment of cables, power cord and air circulation.

3.41 Attaching Rubber Feet

1. Make sure mounting surface on the bottom of the switch is free of grease and

dust.

2. Remove adhesive backing from the rubber feet.

3. Apply the rubber feet to each corner on the bottom of the switch.

Figure 3-5. Attaching Rubber Feet to each corner on the bottom of the Switch

Waters Network Systems User’s Manual Page 9

PSX/ES1008 Models

3.42 Power On

Connect the power cord to the AC power socket on the rear panel of the switch.

Check the power indicator on the front panel to see if power is properly supplied.

4.0 Network Applications

This section provides samples of network topology in which the 1008 switch can be

used. The 1008 series of switches are generally used as a desktop, workgroup or

edge segment switch.

Desktop Application

The 1008 series of switches provide the ideal solution for small workgroups. The

switch can be used as a standalone switch to which personal computers, servers, and

print servers are directly connected to form a small workgroup.

Figure 4.1 Desktop Application

Waters Network Systems User’s Manual Page 10

PSX/ES1008 Models

4.1 DIP-Switch Setup

The DIP-switch is used to configure the modes for VLAN and duplex modes. DIP

switch settings are described in the following table.

No. Function Description

ON: Enable the VLAN function on each port1 VLAN

OFF: Disable the VLAN function on each port

HDX: Half Duplex2 Fiber Port Full/Half Duplex

FDX: Full Duplex

Table 4-1

Figure 4-1 DIP Switch

DIP

switch

LEDs

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Waters Network Systems Interruttore

Waters Network Systems

Waters Network Systems ProSwitch FlexPort- 2600M Manuale utente

Waters Network Systems

Waters Network Systems ProSwitch-Quad Series Manuale utente

Waters Network Systems

Waters Network Systems GS1016 Manuale utente

Waters Network Systems

Waters Network Systems MS1008-2G-4POE Manuale utente

Waters Network Systems

Waters Network Systems GSM2109-1009-8PoE Manuale utente

Waters Network Systems

Waters Network Systems ProSwitch Lite Manuale utente

Waters Network Systems

Waters Network Systems GSM 2124 Manuale utente

Waters Network Systems

Waters Network Systems ProSwitch FlexPort- 2600M Manuale utente

Waters Network Systems

Waters Network Systems PS-2126M-POE Manuale utente

Waters Network Systems

Waters Network Systems EN-FUTP-8 Manuale utente

Waters Network Systems

Waters Network Systems ProSwitch 2800M Manuale utente

Waters Network Systems

Waters Network Systems ProSwitch-Secure 1007 Manuale utente

Waters Network Systems

Waters Network Systems PSX1008-GTX Manuale utente

Waters Network Systems

Waters Network Systems GS1008 Manuale utente

Waters Network Systems

Waters Network Systems GSM2109 Manuale utente

Waters Network Systems

Waters Network Systems PSX1008-TX Manuale utente

Waters Network Systems

Waters Network Systems GSM2108 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente