Waudio UHF Manuale utente
www.prolight.co.uk
UHF
Professional Wireless
UHF Guitar Transmitter Pack
Order code: MIC50 (863.5 MHz)
Order code: MIC50A (864.8 MHz)
USER MANUAL
SAFETY
SAFETY
IMPORTANT:
The manufacturer will not accept liability for any resulting damages
caused by the non-observance of this manual or any unauthorised
modification to the equipment.
• Never let the power-cable come into contact with other cables.
Handle the power-cable and all mains voltage connections with
particular caution!
• Never remove warning or informative labels from the equipment.
• Do not open the equipment and do not modify the equipment.
• Do not switch the equipment on and off in short intervals, as this
will reduce the system’s life.
• Only use the equipment indoors.
• Do not expose to flammable sources, liquids or gases.
• Always disconnect the power from the mains, when equipment is not
in use or before cleaning! Only handle the power-cable by the plug.
• Never pull out the plug by pulling the power-cable.
• Make sure that the available voltage is between 220v/240v.
• Make sure that the power-cable is never crimped or damaged. Check
the equipment and the power-cable from time to time.
• If the equipment is dropped or damaged, disconnect the mains power
supply immediately. Have a qualified engineer inspect the equipment
before operating again.
• If the equipment has been exposed to drastic temperature fluctuation
(e.g. after transportation), do not switch it on immediately. The arising
condensation might damage the equipment. Leave the equipment
switched off until it has reached room temperature.
• If your product fails to function correctly, discontinue use immediately.
• Pack the unit securely (preferably in the original
(packing material), and return it to your Prolight dealer for service.
• Only use fuses of same type and rating.
• Repairs, servicing and electric connection must only be carried out
by a qualified technician.
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS
WARRANTY: One year from date of purchase.
Contents
Manual Contents
System Features………………………………………………………………....1
Receiver Features………………………………………………………....…..2-3
Transmitter Features………………………………………………………...…..3
Specifications..……………………………………………………………………4
System Features:
• Extended frequency response optimised for guitars
• No cable or separate body pack
• Input gain control for compatibility with all instrument pick-ups
• Wide frequency response and dynamic range for true hard-wired sound
• The GTR-1 system is probably the easiest way to turn a guitar, bass or
portable keyboard into a wireless instrument.
• The swivel jack plug will mate with any type of output jack socket and is
spring loaded to hold it securely against the instrument.
• Almost invisible and won’t be in your way while playing
• On/Mute-Off switch and gain control are always within easy reach
1
Receiver features
Receiver Features:
1, Power button: Turns the receiver ON/OFF
2, Squelch control button
3, Volume control: Rotate the knob clockwise to increase or
Anti-clockwise to decrease the volume
4, Antenna “A”
5, Antenna “A” indicator
6. Antenna “B”
7, Antenna “B” indicator
8, Audio indicator: The green light of the AF signal indicator illuminates
according to the volume
9. Low battery indicator: This light illuminates when the battery
needs replacing
10, Power ON indicator: This light illuminates when the receiver is
connected to a power source via the power supply (included)
2
Receiver features (cont)
11, Battery cover: Open the cover to fit 2 x 1.5V AA Alkaline batteries
12, 6.35mm jack audio output connector (unbalanced high Z): An
unbalanced audio cable with 6.35mm jack plug (such as standard
guitar cable) can be used from this connector to your
amplifier input.
13, Power input connector: Connect the AC adaptor to this socket and then
connect to an AC electrical outlet. (Please use supplied AC adaptor)
Transmitter Features:
1, Power and audio mute switch: Push the switch to the “ON” position, the
indicator will illuminate for a moment. After pushing the switch to the middle
of the “ON” / “OFF” position, it will allow the muting of the audio, avoiding
the “thump” noise that can occur when turning audio signals ON/OFF.
It is recessed to prevent it from being accidently turned off.
2, Gain control switch: Adjust the audio level switch to desired output level
(L = Low, M = Medium and H = High)
3, Antenna
4, 6.35mm Audio Jack plug
5, Low battery indicator This light illuminates when the battery
needs replacing
6, Battery cover: Open the cover to fit 1 x 1.5V AAA Alkaline batteries
3
Specifications
Specifications:
Effective range:
50M (150ft) under optimal conditions
NOTE: Actual working range depends on RF signal absorption
Audio Frequency Response:
Typically 50Hz to 15,000Hz, ÷3dB
Modulation: FM
Audio Bandwidth: 40Hz to 20kHz
THD: typ,1%
Power Requirements: 9V DC 150mA
Transmitter Current: 80mA
Receiver Power Supply: 2 x 1.5V AA size battery
Transmitter Power Supply: 1 x 1.5V AAA size battery
Dimensions: 130 x 80 x 35mm - Receiver
78 x 23mm - Transmitter
4
Indice
