Wenger AltiNav Manuale utente
ii iii
Instruction Manual
AltiNav
Wenger NA
15 Corporate Drive
Orangeburg, NY 10962 USA
Tel: 1-800-431-2996, 1-845-365-3500
Email: [email protected]
Web: www.WengerNA.com
iv 1
Low Battery Detection .....................................42
Power Saving Mode........................................43
Caring For Your Watch .......................................44
Warranty Information ........................................45
Warranty Service Instructions ..................................46
Registration Form ...........................................48
Table of Contents
Crafted for Life .............................................2
Watch Components ...........................................3
General Features and Components ................................4
Operating Instructions
Setting the Analog Watch ....................................6
Digital Read-out Modes ......................................7
Setting the Digitial Time and Calendar ...........................8
Activating the Weather Forecast Feature ........................10
Setting the Alarm .........................................11
Using the Chronograph (Stopwatch) Feature......................14
Using the Altimeter Feature..................................17
Using the Barometer Feature ................................20
Precautions and Tips for Using Compass.........................24
Digital Compass Instructions .................................25
23
Crafted For Life
Delémont, Switzerland 1893
Over a century ago, Wenger built a factory in this tiny Swiss village and
transformed it into production headquarters for the Genuine Swiss Army
Knife™ still used by the Swiss Army today. As it was 100 years ago, each
tool, implement and knife manufactured by Wenger is crafted by hand in solid
stainless steel and each individually inspected for quality and craftsmanship.
This same attention to detail has been applied to genuine Wenger watches.
Wenger watches are Swiss-designed, -engineered and -crafted with only the
most accurate Swiss movement available. Each watch is constructed with form
and function that last a lifetime. As with the genuine Swiss Army knife, Wenger
watches are durable, high quality, and versatile enough for use on any occasion.
Wenger watches are engineered to provide the same resourcefulness as the
genuine Swiss Army knife, supplying functionality beyond the everyday.
Wenger Watch Components
Movements – Specialized Swiss mechanism.
Case Body – All PVD coated stainless steel for quality and durability.
Straps – Silicone rubber strap
Luminous Markers – Hands, markers, and numerals may be overlaid with
Super Luminova®which recharges in seconds when exposed to direct sunlight
for extended nighttime visibility.
Crystal – Scratch resistant Sapphire.
Crowns – Crowns are stainless steel buttons on the sides of the case body used
to control the many functions of this watch.
45
Start/Stop Button
•Tostartorstopthechronographtimer.
•Toselectbetweenfunctionswithinthesamemode.
•TotoggleYes/No.
•Toincreasevalueswithinfunctions.
Reset Button
•Toactivatethe“lap”or“reset”modeinthechronograph.
•TotoggleYes/No.
•To decrease values within functions.
Mode Button
•ToselectCurrentTime,Alarm,Chronograph,
Altimeter, Barometer or Compass Modes.
•ToentertheSettingDisplayinTime,Alarm,Altimeter,
Barometer and Compass Modes.
•Toselectfunctionswithinthedifferentmodes.
Light Button
•Toincreasethebrightnessofthedigitalread-outsfor3seconds.
note: Press any button to activate your watch under Power Saving Mode.
See p.43 for more information.
General Features and Components
Digital read-out
Digital read-out
Strap or bracelet
Start/Stop button
Reset button
Light button
Mode button
Minute hand
Second hand
Inner bezel
Hour hand
Crown
67
Digital Read-out Modes
Current Time Mode
Compass Mode
Alarm Mode
Barometer Mode
Chronograph Mode
Altimeter Mode
Note: A different sound will be emitted when entering Current Time Mode.
Setting the Analog Watch
1. To set the analog time, gently pull out the crown to Position 2.
2. Rotate crown so the watch hands move clockwise to the correct time.
3. Push crown back to Position 1.
Second Hand Alignment
To synchronize the digital with analog seconds, push in the crown to return it to
Position 1 at correct moment.
Position 1 Position 2
Important note:
Iftheanalog“second”
andthedigital“second”
are not synchronized, the
digital setting may not
function properly.
89
Setting the Digital Time and Calendar
1. To set the digital time, press and hold the mode button for 2 seconds in the
Currenttimemode.Theselecteditemwillashinthedigitalread-out.
2. Press the Mode button to change the function within the Time Setting
Sequence diagram shown at right.
3. PresstheStart/Stopbuttontoincreasethefunctionvalueandpress
the Reset button to decrease it.
4. Press and hold the Mode button to exit the Current Time Setting Mode.
Current Time Mode
Day of Week Date
Current Time
Digital Time Setting Sequence Diagram
Press Mode button
to toggle thru
the functions
Flashingeldsindicate
that they are selected.
Second
Key Tone
On/Off
Hourly
Chime
On/Off
Minute
DST
On/Off
LCD
Auto Off
Hour
Hour
Format
LCD
Auto On
Year
Date
Format
Contrast
Month
Day
Temperature
10 11
Setting the Alarm
There are 5 Daily or Schedule alarms. Schedule alarms can be set to sound on a
particular date. See Diagram on p.12.
1. When in Alarm Mode, press and hold the Mode button to enter into the Alarm
Numberfunction.PresstheST/STPbuttontochoosethealarmnumberand
press the Reset button to move in the opposite direction.
2. Press the Mode button to enter the Alarm Type function and choose between the
Daily or Schedule type. Press the Mode button again to enter the Hour function
andpresstheST/STPorResetbuttonstoincreaseordecreasethevaluefor
either function. Press the Mode button to enter the Minute function and repeat
the steps to increase or decrease the value. Follow these same steps for selecting
the Year, Month and Day for the Schedule Type of alarm.
3. PresstheModebuttontoenterandselecttheNoteOn/OffFunction.UseST/STP
and Reset to choose on or off. If you have selected Note On, press the Mode button
toselecttheNote.UseST/STPandResettochooseoneofthe7presetnotes.
4. Press the Mode button to revert back to the beginning of the alarm setting
sequence. Press and hold the Mode button to exit the alarm setting sequence.
Note: The watch will exit the setting sequence automatically when no button is
pressed for more than 1 minute.
Weather Forecast Feature
The AltiNav watch analyses the changes in air pressure to predict upcoming
weather. The watch provides 4 different symbols to indicate the weather forecast.
Activating the Weather Forecast Feature
1.PresstheST/STPButtonwhileinCurrentTimeModetotogglebetweenthe
date and the weather forecast and temperature.
Important note: Since the watch predicts the upcoming weather by analysing
changes in air pressure, accuracy may increase when the user stays at the same
altitude for at least 24 hrs. The watch predicts the weather by adopting
general weather prediction principles. It is not capable of indicating dramatic
changes in weather within a very short period of time.
Sunny Cloudy with Sun Cloudy Rainy
12 13
Activating the Alarm
1.WheninAlarmMode,presstheST/STPbuttontoselectdifferentalarms.
2. ToturnON/OFFanalarm,selectthetargetalarmandpresstheResetbutton
to turn it ON or OFF.
3. To set an alarm, select the target alarm and hold down the Mode button to
enter the setting display sequence described on pg. 11.
4. When the alarm sounds, press any key to stop the beeping.
Note: When the Schedule Alarm is selected, the date of the alarm will be
scrolled once.
Alarm Setting Sequence Diagram
Alarm Mode
Alarm ON Alarm OFF
[L/R]
Alarm ON Alarm OFF
[L/R]
Alarm ON Alarm OFF
[L/R]
Alarm ON Alarm OFF
[L/R]
Alarm ON Alarm OFF
[L/R]
Alarm # Alarm Type
Daily Alarm
Schedule Alarm
“OFF”
“ON”
Alarm ON or Alarm OFF
or
Alarm # Alarm
Type
Note
Selection**
Hour
Note
On/Off
Minute
Day*
Year*
Month*
Note:*Day/Month/Yearsettingswillonlyappearif“Schedule”isselectedasthe
AlarmType.**NoteSelectioncanonlybeaccessedwhentheNoteoptionis“ON”.
14 15
Using the Chronograph (Stopwatch) Feature
The chronograph feature is a stopwatch which measures elapsed hours, minutes,
and seconds. It is also capable of measuring split-timed events (timing a continu-
ous event and sub-events simultaneously; e.g., timing an individual lap and an
entire race).
Stopwatch
1.Tostartthestopwatch,presstheST/STPbuttoninChronographMode.
2.Tostopit,presstheST/STPbuttonagain.
3. Read the seconds, minutes, and hours on the Total Time read-out.
4. To reset the stopwatch to zero, press and hold the Reset Button.
Note: The clock function of the watch will continue to operate while using
the stopwatch.
Chronograph Mode
Lap # Elapsed Time
Total Time
Using the Split-Timing Function
1.Tostartthestopwatch,presstheST/STPbuttoninChronographMode.
2. To mark or record a lap or other intermediate segment of time, press the Reset
button. The Lap time will be shown for a short while. The chrono will continue
to record the lap time internally, then externally. After that, the lap number will
be increased by 1. If there are more than 10 laps, the laps over the 10th lap will
be accumulated into the 10th lap. The watch will continue to time the total
event internally while the lap time is being recorded.
After 10 Sec
Lap # increased by 1
Stopwatch Running
(no lap recorded)
Lap Display
Lap Time Recording
Stopwatch Continuous
Running
Lap Time
Total Time
16 17
Recalling the Lap Records
1. Press the Reset button when the chronograph is stopped.
2.PresstheST/STPbuttontomovetothelastlaprecord.Thiswatch
has a ten lap memory.
Recalibrating the Chronograph
1. Press and hold the Reset button. All lap records will be reset to zero.
Chronograph Stop
Read-out
Lap Records Recall Sequence
1st Lap
Record
Last Lap
Record
Reset Reset
Reset
Reset
ST/STP
Next Lap
Record
Using the Altimeter Feature
The top digital read-out row displays an Elevation Chart for the previous 36 hours.
In order to conserve power, your altitude is updated as follows:
•First5minutes:itupdateseverysecond
•Next24hours:updatesevery10seconds
•Afterwards:updateseveryminute
Note: The altimeter range is from -2,316 ft to 30,067 ft (-706m to 9,164m).
Press the Reset button to switch between or Ft. As this is a sophisticated
timepiece, please refer to our website for more in depth information.
Altimeter Mode Display
-1 hour
-36 hour
Current Altimeter
36-Hr Elevation Chart
Indice
Altri manuali Wenger Orologio
Wenger
Wenger Standard Watches Manuale utente
Wenger
Wenger Commando Traveler Manuale utente
Wenger
Wenger Commando Traveler Series Manuale utente
Wenger
Wenger AquaGraph 70832 Manuale utente
Wenger
Wenger Traveler Pocket Alarm Manuale utente
Wenger
Wenger Attitude Automatic ETA 2824-2 Manuale utente
Wenger
Wenger Urban Metropolitan Automatic SELLITA SW... Manuale utente
Wenger
Wenger 70100 Manuale utente
Wenger
Wenger Nomad Manuale utente
Wenger
Wenger Battalion Manuale utente
