Winbook N7405JV Manuale utente
N7405JV
INSTRUCTION MANUAL
IP CAMERA
Index
1INTRODUCTION................................................................................................................ 1
1.1 THE PACKAGE INCLUDES ............................................................................................... 1
1.2 FUNCTION AND FEATURES............................................................................................. 1
1.3 FUNCTION AND FEATURES............................................................................................. 2
2APPEARANCE AND INTERFACE.................................................................................... 3
2.1 APPEARANCE ............................................................................................................... 3
2.2 EQUIPMENT INTERFACE............................................................................................... 3
3CONNECT TO IP CAMERA OVER A LAN ....................................................................... 4
3.1 LAN CONNECTION ......................................................................................................... 4
3.2 SEARCH AND SET THE IPADDRESS OF THE IPCAMERA.................................................... 4
3.3 VIEW IP CAMERA VIDEO FEED....................................................................................... 5
3.3.1 Video Display.......................................................................................................... 6
4CONNECT TO IP CAMERA OVER A WAN ...................................................................... 7
4.1 WAN (WIDE AREA NETWORK)CONNECTION .................................................................. 7
4.2 PORT FORWARDING ...................................................................................................... 8
4.3 DDNS ......................................................................................................................... 8
4.3.1 Manufacturer’s DDNS............................................................................................. 8
4.3.2 Third Party DDNS................................................................................................... 9
5OTHER SETTINGS............................................................................................................ 9
5.1 NETWORK SETTING....................................................................................................... 9
5.1.1 Basic Network Setting............................................................................................. 9
5.1.2 WiFi Setting............................................................................................................. 9
5.1.3 ADSL Setting ........................................................................................................ 10
5.1.4 UPnP Setting ........................................................................................................ 10
5.1.5 DDNS Setting ........................................................................................................11
5.1.6 MSN Setting...........................................................................................................11
5.2 ALARM SETTINGS ........................................................................................................11
5.2.1 Alarm Setting .........................................................................................................11
5.2.2 Mail Service Setting.............................................................................................. 13
5.2.3 FTP Service Setting.............................................................................................. 13
5.2.4 Alarm Server......................................................................................................... 14
5.3 ADVANCED ................................................................................................................. 14
5.3.1 User Setting.......................................................................................................... 14
5.3.2 Multi Device Setting.............................................................................................. 15
5.4 MAINTAIN ................................................................................................................... 16
5.4.1 Device Information................................................................................................ 16
5.4.2 Time Setting.......................................................................................................... 16
5.4.3 Firmware upgrade................................................................................................. 16
5.4.4 Restore Factory Default........................................................................................ 17
5.4.5 User browsing Log................................................................................................ 17
6CENTRALIZATION CONTROL....................................................................................... 17
7FAQ.................................................................................................................................. 18
- 1 -
1 Introduction
The IP Camera combines a high quality digital video camera with network connectivity and
a powerful web server to bring clear video to your desktop from anywhere on your local
network or over the Internet.
1.1 The package includes
IP Camera * 1
IP Camera Utility CD *1
5V Power Adapter *1
Mounting Stand* 1
1.2 Function and Features
The video is compressed by MJPEG. There are three video resolution options, VGA,
QVGA, and QQVGA. User can change some parameters according to their demands
to satisfy their visual preferences.
With built-in Microphone, it enables the User to monitor audio at the site. User can also
connect this equipment to a speaker, and it supports two-way intercom function.
It uses TCP/IP network protocols and has an inner web server. Users can browse video
through IE or other browsers. Data is transferred through one port; it is easy for user to
configure the network setting.
Supports 802.11b/g protocol, can build up wireless monitoring.
Supports UPNP, port forwarding automatically on the router.
Motion detection can detect the environmental situation.
Infrared LED for night vision covers 5m area, to enable 24 hour monitoring.
Supports mobile phone remote viewing
Supports three levels of user authority.
Supports upgrading online.
A label on the bottom of each IP Camera lists the Device ID and DDNS. When IP
Camera is connected to the internet, this URL can be used to visit the device.
Manufacturer provides free software which supports Multi-view, Long time recording,
video replay etc.
RJ45 Cable * 1
Mounting Screws with wall anchors * 4
Quick Guide* 1
- 2 -
1.3 Function and Features
noitpircseDmetIbuSmetI
rosnesSOMCrosneS
k003lexipfolatoT
Minimum
illumination IR on，0 Lux
Image
Capture
Lens f=3.6mm, F=2.0, Fixed Iris
Lighting 12 850nm Infrared LEDs, 5m range
Assistant lortnocotuAlortnoCgnithgiL
Resolution 640*480(VGA)/320*240(QVGA)/160*120(QQVGA)
GEPJMnoisserpmoC
spf03etaremarF
spbM5~spbk821etartiB
pilF/rorriMnoitatoRegamI
Video and
Audio
MCPDAnoisserpmoCoiduA
Basic Protocols TCP/IP、UDP/IP、HTTP、SMTP、FTP、DHCP、
DDNS、UPNP、NTP、PPPOE
Network
g/b11.208locotorPrehtO
stroppuSlortnocoediV
stroppuSoiduayawlauD
stroppuSnoitceteDnoitoM
Triggered Actions Email/FTP/ send message to alarm server
sleveleerhTgnitteSresU
stroppuSgnitteSemiT/etaD
Upgrade Upgrade from network
Other
Features
DDNS Free DDNS provided by manufacturer
Ethernet 10Base-T/100base-TX
cimlanretnInIoiduA
Hardware
Interface Audio Out Audio Line-out interface x 1
g021thgieW
Main body 48mm(L)*85mm(W)*110mm(H)
V5CDrewoP
W6<noitpmusnocrewoP
Operating
temperature -20 ~℃50℃
Physical
Specs
Operating Humidity 10% ~ 80% non-condensing
OS Supported Windows 98/2000/XP/Vista/ Win 7 etc.
Browser IE 6.0 and Above or Compatible Browser, Firefox,
Safari etc.
Software
(PC Side) Application
Software IPCMonitor
- 3 -
2 Appearance and Interface
2.1 Appearance
Figure 1
Status Indicator: when device is running, flashes one or twice per second to indicate the
wired network is connected; rapid flashing（2~3 times per second, indicates wireless
network is connected.
2.2 Equipment interface
Figure 2
- 4 -
3 Connect to IP Camera Over a LAN
3.1 Lan connection
Figure 3
3.2 Search and set the IP address of the IP camera
Run “BSearch_en.exe” from the support CD, the setting interface is as figure 4.
Figure 4
Operation Steps:
1) Click “Search (F3)
2) Choose the device
3) Change the IP address of the IP camera according to the information in the red frame
on the left. The numbers in the red circle should not be the same.
- 5 -
4) Put the user name and password into “Authentication” (By default, the user name is:
admin, password is: 123456).
5) Click “Update”
6) After successfully updating, click “Search (F3)”, choose the device and click “Browse
(F4)”. Then you may view the IP camera, as shown in Figure 5.
NOTE:
1) If you don’t know how to manually configure “IP config”, you can also tick the “Set IP
automatically” box to get the IP address from the router automatically.
2) If you have firewall software on your PC, when you run BSearch_en.exe, it may pop up
a window to ask “whether you want to block this program or not”, then you should
choose not to block.
3) The default IP address is 192.168.0.178 and default http port is 80.
Figure 5
3.3 View IP Camera Video Feed
We suggest using the Internet Explore to view the camera video feed（it provides more
functions, but User will need to install the Player software first. Click the “download and
install player (first use)” link, it will pop up a dialogue box as in Figure 6, click Run, it will
automatically download Player and install it.
- 6 -
Figure 6
3.3.1 Video Display
After installing the software, click the “Mode 1 to view” link as in Figure 5 to view the
camera video feed (see Figure 7).
Figure 7
1) Main Menu
The main menu includes the function settings of the submenus
2) Status Display
The status display is in upper right corner, it shows the status of up to 9 devices:
- 7 -
if not connected, button is gray
if connected, button is green
If wrongly connected, button is yellow
If alarm, button is red
3) Multi Device display area
If User adds multiple devices （refer to section 5.3.2）, when shifting to 4-Ch or 9-CH, it will
automatically show additional devices. You select one device, and you can operate it using
these keys: Play, Stop, and Record, Control Pan/Tilt, etc.
These buttons mean start video, stop, monitor, talk, record and snapshot.
Note: If you want to click this button to record video, please go to
Advanced—Other Settings to set the Record Path first. Please see Figure 8 below.
Figure 8
User can also set the device frame rate、resolution, brightness, contrast and other
parameters.
Note: This model has no Pan/Tilt or Alarm I/O function. You can control additional
cameras using the Multi-view feature of the IP Camera software.
4 Connect to IP Camera Over a WAN
4.1 WAN (Wide Area Network) connection
Figure 9
Indice
