WINDMAX IF6601 Manuale utente

Installation and Operating

Instructions

Induction Hob IF6601

Please read these instructions carefully before attempting to install or use this

appliance.

It is advisable to keep these instructions in a safe place for future r

eference.

troduct

ion

Thank

ou for choosin

this a

liance

It has been designed to give years of trouble-free use

prov

ded

it is installed and maintained

correct

Please read these instructions carefully before installing

using your appliance. It is advisable to keep your purchase and

installation receipts with these instructions in a safe place

for

future reference. Included is some important safety in

orma

ion

in addition to guidelines and recommendations that will

enab

you to take full advantage of all the functions available

This quality appliance has been tested and certified to meet all

applicable electrical and safety

standards.

This appliance must be installed and connected in

accordance with current regulations.

After unpacking the appliance ensure that there is no visible

damage. If the appliance has been damaged during transit, do

not use it, contact your retailer immedia

ely

Description Of The Appliance

1. 2000W Cook Zone

2. 1300W Cook Zone

3. 2000W Cook Zone

4. 1300W Cook Zone

5. Glass plate

6. Control panel

CONTENTS:

Section 1. Installation

Section 2. Safety Advice

Section 3. Operating the Appliance

Section 4. Maintenance

Section 1. Installation

-Remove all packaging, protective film and securing tape

from the appliance.

-Position the appliance in a dry atmosphere.

-The following dimensions are provided as a guide for

installation – your installer will carry out the

installation in accordance with the current

regulations.

-Your installer will connect the power cable in accordance

with the current regulations.

To install this appliance, please proceed as follows:

1.1. Work-Surface Cut-Out

-Cut out the work-top as shown in the drawing below,

ensuring that the actual sizes used are as per the chart

below.

-For installation and use, a minimum of 5cm

must be maintained around the cut-out.

-The work surface must have a thickness of at least 30mm.

-The work surface must be heat resistant.

1.2. S

ace to Rear or Side Wall

A = 760mm B = 50mm (min) C = 20mm (min)

D = Air Gap/Intake E = Air Exit (5mm)

1.3. Fixin

Brackets

-Fix the brackets as shown below:

a) Screw b) Bracket c) Screw Hole d) Base of hotplate

Model L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)

IF6601 500 800 62 58 750 460 50mini

1.4. Electrical Connection

These appliances have a total Power Rating of 7000W and

must be ‘hard wired’ into a suitable fused spur adjacent to the

appliance housing. The product must be installed by a

Qualified Electrician.

Please note that a switchable spur should be accessible

above the work surface in order that the power can be turned

off.

Section 2. Safety Advice

-Please read this booklet thoroughly before installing

and switching on the appliance. The manufacturer

accepts no responsibility for incorrect installation and

usage.

-This appliance is guaranteed for Domestic Use Only.

This appliance shall not be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction on how to use the appliance in a safe way and

understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

-This appliance must only be used for cooking/heating foods

and liquids. Do not use it for any other purpose.

-It is important that you use only metal pans specifically

designed and/or approved for use on Induction or

Ceramic Hobs. Never allow melamine or plastic

containers to come in contact with the heat zones.

-If using an adaptor, this must be used in accordance with

the manufacturers instructions and ensure that the

electrical

circuit is not overloaded as this could cause overheating.

-Do not twist or bend the cables, and keep them away from

hot surfaces. Following installation make sure that the

power

cable is not trapped underneath the appliance.

-Keep the appliance surfaces clean. Failure to do this

could lead to the appliance malfunctioning.

-The surface of this appliance will get extremely hot during

use.

The surface of this appliance will remain hot after it has

been turned off. Do not touch or clean the heating zone

until it has completely cooled down.

-If the power supply cord is damaged, it must be replaced

by the manufacturer, it’s service agent or similarly

qualified persons in order to avoid a hazard.

Important Message for Cardiac Pacemaker Implant Patients!

THE INDUCTION HOB GENERATES MAGNETIC FIELDS IN ITS IMMEDIATE SURROUNDINGS. Your

pacemaker must be designed in compliance with the corresponding regulations in order for no

interference to be caused between it and the hotplate. Consult the pacemaker manufacturer or your

doctor to determine whether it complies with the regulations in force or whether any incompatibilities exist.

Section 3. Operating the Appliance

3.1. Cookware Suitable for Induction Hob

Induction hobs are made from smooth, ceramic glass, the heat

comes from a magnetic induction coil which heats the cookware

but not the cooking surface. The heat from the cookware is

transferred to the food.

Pans suitable for induction hob use must be made from

magnetisable metal such as cast iron or steel. Pure aluminium,

copper or glass pans will not work with this type of hob unless the

base is bonded with a magnetic metal.

Check that pans are attracted to a magnet - this ensures that

they are suitable for use with an induction hob.

It is important that you use only metal pans specifically designed

and/or approved for use on Induction Hobs. Never allow melamine

or plastic containers to come in contact with the heat zones.

3.2. Cookware Suitable for Ceramic Hob

Ceramic hobs do not pick pot. You can use any kind of pot or

pan.

Make sure that the base of your pan is smooth, sits flat against

the glass, and is the same size as the cooking zone.

3.3. Control Panel

1. Heating zone selection controls

2. Timer control

3. Power / Timer regulating key

4. Key/Lock control

5. ON/OFF control

3.4. Power, Cooking & Timer Functions

3.4.1. On-Off

To turn the appliance on or off, press and hold the Power On/Off

control (5) until you hear a ‘beep’. When the appliance powers

up, the heat zone indicators will display.

3.4.2 Setting the Zone Temperature

Press the required zone (1) and then use the ‘+’ or ‘-’ (3) to

increase or decrease the power for the required zone.

Power settings range from ‘0’ lowest to ‘9’ highest setting.

Press the heat zone control off when you have finished and

then turn the appliance off by pressing the Power Control (5).

3.4.3. Timer (1 to 99 Minutes)

You can use the Timer to operate one of the heat zones for a time

period of between 1 and 99 minutes:

-Press the heat zone button that you want to operate the timer

on (1) and select the heat setting level.

-Press the Timer Control (2).

-Select the required time between 1 and 99 minutes by using

the ‘+’ or ‘-’ controls (3).

-Now the heat zone will operate for the selected time and

automatically turn off at the end of the period. An audible

signal will also be heard at the end of the time period.

-If you need to cancel prior to the end of the set time, simply

press the heat zone control and then the Timer Control.

3.4.6. Child Lock

To activate the Child Lock, press and hold the Child Lock control

(4) until ‘Lo’ is displayed. The lock will now be set and the

appliance will not operate. To unlock the Child Lock, simply press

and hold the Child Lock control again until the display is removed.

3.4.7. Hot Surface Warning Indicator

Please note, a hot surface indicator (H) will show when one or

more of the heat zones has been used – it will go out when the

zone is completely cool.

Indice

Altri manuali WINDMAX Piano cottura

WINDMAX

WINDMAX YL-CF6002 Manuale utente

Manuali Piano cottura popolari di altre marche

Siemens

Siemens EX875KYV1E Scheda tecnica

AEG

AEG CERAMIC HOB 6010 K Manuale utente

VALERA

VALERA CT 70A Manuale utente

Zanussi

Zanussi ZGF 6420 Manuale utente

Gaggenau

Gaggenau CI 273 Manuale utente

G3 Ferrari

G3 Ferrari Energy Manuale utente

Pkm

Pkm IN4B Manuale utente

Award

Award H903BG Manuale utente

Zanussi

Zanussi VCH 5005 RZ Manuale utente

Miele

Miele KM 523 Manuale utente

Hotpoint

Hotpoint IS67V8CCXT/E Manuale utente

AEG

AEG HK854870XB Manuale utente

Cookology

Cookology SEP600BK Manuale utente

Bauknecht

Bauknecht Hob Manuale utente

Zanussi

Zanussi ZGM 782 Manuale utente

dipo INDUCTION

dipo INDUCTION DIBK218S Manuale utente

Miele

Miele KM 5987 Manuale utente

Miele

Miele KM 360 G Manuale utente