Winget Taskman Manuale di servizio
OPERATORS
HANDBOOK
TASKMAN
PRESSURE WASHERS
WINGET LIMITED
P.O. Box 41
EDGEFOLD INDUSTRIAL ESTATE
PLODDER LANE
BOLTON
GT MANCHESTER
U.K.
BL4 0LR
Tel: ++ 44 (0) 1204 854650
Fax: ++ 44 (0) 1204 854663
www.winget.co.uk
Issue 3 2010
CONTENTS
1Introduction
2Declaration of Conformity
4Identification
5Warranty Terms & Conditions
7Safe Working
12 Operation
18 Maintenance and Service
22 Technical Information
25 Parts Listings
INTRODUCTION 1
The contents of this Handbook although correct at the time of
publication, may be subject to alteration by the manufacturers
without notice.
Winget Limited operate a policy of continuous product development.
Therefore, some illustrations or text within this publication may differ
from your machine.
WARNING: The operator must read both this handbook and the
Engine Operators Handbook and be familiar with all the controls
before attempting to operate this machine.
The contents of this handbook are designed as a guide to the
machines controls, operation, working capacities and maintenance. It
is not a training manual.
These are the original Instructions in the English Language
issued by Winget Limited & TASKMAN to comply with the requirements
of Directive 2006/42/EC
DECLARATION
OF
CONFORMITY
We: Winget Limited,
Of P.O. Box 41, Plodder Lane, Bolton, Lancs, England BL4 0LR declare that
the following TASKMAN Pressure Washers:-
Models:- PW100PH10/11/12, PW140PH12, PW150PH8/12/14, PW170PH15
PW170DY15, PW200PH13/15/21, PW200DY15, PW90PH12
Serial Numbers:- . 1000-99000 .
To which this declaration relates, with a maximum net installed power of
6.5Kw. Having been tested in accordance with the Conformity Assessment
Procedure detailed in Annexe V of Directive 2000/14/EC is in conformity with
the provisions of the “Noise Emission in the Environment by Equipment for
use Outdoors Directive 2000/14/EC”. Representative samples of this
equipment was tested and Sound Power Levels (Lwa) recorded of:-
PW100PH10 102db
PW100PH11 97db
PW100PH12 101db
PW140PH12 105db
PW150PH8 102db
PW150PH12 105db
PW150PH14 103db
PW170PH15 104db
PW170DY15 111db
PW200PH13 107db
PW200PH15 107db
PW200PH21 105db
PW200DY15 110db
PW9012 104db
We guarantee under the provisions of the above Directive (2000/14/EC) that
the Sound Power Levels for these equipment models will not exceed:-
PW100PH10 104db
PW100PH11 99db
PW100PH12 104db
PW140PH12 107db
PW150PH8 104db
PW150PH12 107db
PW150PH14 106db
PW170PH15 106db
PW170DY15 114db
PW200PH13 109db
PW200PH15 109db
PW200PH21 108db
PW200DY15 114db
PW9012 106db
We also declare that the above equipment is also in accordance with the
following EC Directives:-
2006/42/EC 2004/108/EC
Bolton 24.03.10 S. Hodge .
Place and date of issue Name and signature or equivalent
marking of authorised person.
Joint Managing Director
Position
The above named person is also responsible for holding the Technical Documentation
applicable to the product to which this declaration relates and may be contacted at the
address which appears at the head of this declaration
Please take care of this document, as duplicate copies are not available.
This document is in accordance with EN45014:1989
IDENTIFICATION 4
PW90PH12 PW100PH11 PW140PH12
PW100PH12
PW140PH12T PW100PH10GC PW170PH15
PW150PH12GC PW200PH13
PW150PH14
PW200PH15 PW200DY15E PW200DY15ES
PW200PH21
WARRANTY TERMS & CONDITIONS 5
Winget Limited assures you that if any of the parts identified within
the Parts section of this manual become defective due to faulty
manufacture or materials within 6 months from the date of purchase
when used commercially, or 12 months for domestic customers, the
part will be repaired or replaced under warranty free of charge by any
authorised Winget Limited Distributor.
Warranty repairs must be carried out by an authorised distributor,
unless prior agreement has been agreed in writing with the Warranty
Department at Winget Limited.
This warranty is given to the first owner and may be transferred to
subsequent owners for the balance of the Warranty period.
Winget Limited’s liability only extends to the costs of repair or
replacement of the faulty parts and necessary labour charges
involved in the repairs. The company accepts no liability for any
consequential loss, damage or injury, resulting directly or indirectly
from any defect in the goods.
Items not covered by Warranty and considered to be the customers
responsibility include normal maintenance services; replacement of
service items and consumables; replacement required due to abuse,
accident, misuse or improper operation; replacement of wearable
items e.g. hoses, lances, pins bushes etc.
All Warranty repairs on the petrol or diesel engine must be carried out
by the engine manufacturers authorised distributor.
The Warranty will not apply where the equipment is modified,
converted, or used for purposes other than those for which it was
designed, unless clearance for the modifications etc. have been
granted by Winget Limited in writing.
The Pre-delivery Inspection & Warranty Registration Document must
be completed correctly and returned to Winget Limited within 7 days
of the date of sale. Failure to do so could result in any subsequent
Warranty claim being rejected.
No claim will be considered if other than genuine Winget Limited
parts, which must be obtained via an authorised distributor,
WARRANTY TERMS & CONDITIONS 6
are used to effect a repair, or if lubricants other than those
recommended by Winget Limited and the engine manufacturers are
used.
The equipment must be serviced and maintained in accordance with
the service schedules laid down in this handbook. Evidence that
these have been complied with may be required before Warranty
claims are reimbursed.
Winget Limited have a policy of continuous product improvement
and reserve the right to change specifications without notice. No
responsibility will be accepted for discrepancies, which may occur
between the specification of machines and the descriptions
contained in publications.
SAFE WORKING 7
Safety is the responsibility of all persons working with and around
this machine. Think “SAFETY” at all times. Read and remember the
contents of this and the Engine Operators Handbook.
Any modifications to the machine will affect its working parameters
and reduce built in safety factors. Refer to Winget Limited before
fitting any non-standard equipment or parts. Winget Limited accept
no responsibility for any modifications made after the machine has
left the factory, unless previously agreed in writing. Winget Limited
will accept no liability for damage to property, persons or the
machine if failure is brought about due to such modifications, or
fitment of spurious parts.
Thismachine produces water at HIGH PRESSURE and as such is
potentially dangerous in operation. The high pressure water jet must
never be directed at any person, animal or at any electrical
equipment under any circumstances. If in doubt as to the suitability
of this machine for a particular task refer to Winget Limited.
Never commence work until the daily service checks have made
carried out.
Alwaysreport faults as soon as they are discovered.
Never fill fuel tanks whilst the engine is running.
Never leave the machine unattended with the engine running.
Never attempt to disconnect the high pressure hose from the
machine without first dumping any residual water pressure by first
pulling the trigger gun (Engine stopped)
Never use this equipment in areas of poor lighting.
Alwayswear eye and ear protection when using this machine.
Always keep the working area clear of people and animals
Always stay alert and watch what you are doing.
SAFE WORKING 8
Always be aware of the Lance Reaction Force when operating this
machine.
Alwaysknow how to stop the machine and bleed the water pressure
quickly.
Never over reach or stand on unstable supports, keep your footing
and balance at all times.
Never operate this machine from ladders or step ladders.
Never allow the machine to run dry of water or serious permanent
damage will be caused to the pump unit.
Never run the machine for more than 5 minuteswith the trigger gun
in the closed position, this could result in a rapid rise in the water
temperature, which may damage the seals in the pump.
Never operate this machine under the influence of alcohol or drugs,
(many forms of medication can cause drowsiness) or when tired.
Never connect the machine to a hot water supply unless it is
specifically designed to handle hot water.
Alwaysobserve local Water Authority and Environment Agency
Bylaws when connecting this equipment to a mains water supply.
Always ensure the water supply is clean and free from contaminants.
Never allow contaminated water to enter drains, sewers or local
water courses.
Never allow unauthorised or untrained personnel to operate this
machine.
Never operate on any inclined or unstable surface.
Always drain the water from the hoses and pump on completion of
work, especially in cold weather, to prevent serious damage do not
allow the machine to freeze, protect from Frost.
Never use ether based cold start aids in aerosol cans to aid cold or
difficult starting.
Questo manuale è adatto per i seguenti modelli
19
Indice
