Wittkopp Primor Series Manuale utente
Installation instructions Primor
© Carl Wittkopp GmbH - Errors and omissions excepted
Rel. 1.6 06.02.2017 Installation instructions no 9999-154-0
Content
1 General instructions _____________________________________________________________ 2
2 System overview_________________________________________________________________ 2
3 Installation input unit Primor RE____________________________________________________ 3
4 Installation input unit Primor FE____________________________________________________ 5
5 Installation input unit Primor RO ___________________________________________________ 7
6 Installation input unit Primor FL___________________________________________________ 11
7 Installation input unit Primor FS___________________________________________________ 13
8 Installation lock ________________________________________________________________ 14
9 Mounting lock Primor 100 _______________________________________________________ 15
10 Mounting lock Primor 1000_____________________________________________________ 18
11 Mounting lock Primor 1000/2000/3000/3010/3011 ______________________________ 18
12 Plug positions_________________________________________________________________ 21
13 External power supply__________________________________________________________ 21
14 Functional test ________________________________________________________________ 22
15 Testing the system _____________________________________________________________ 22
2
Installation instructions Primor
1 General instructions
• Please read the installation instructions carefully, before activating the lock.
1.1 Liability notes
• The mounting of the electronic lock and the input unit has to be carried out according to the installation instruction.
• We point out that this installation instruction is part of the VdS-certification and non-compliance leads to the loss of this
certification.
• By opening the lock cover warranty of the manufacturer will be void.
• Take care that the input unit or the lock and the cables should not be damaged.
2 System overview
Primor RE Primor FE Primor RO Primor FL Primor FS
Primor 100 • •
Primor 1000 • •* • •
Primor 2000 • •
Primor
3000/3010/3011 • •* • •
* can serve simultaneously as boltwork actuator
3
Installation instructions Primor
3 Installation input unit Primor RE
3.1 Input unit Primor RE 3.1.1 Dimensions Primor RE
205
83
30
3.2 Installation overview
3.2.1 Input unit Primor RE
Axe profile
Black covering cap
Red covering cap
Cylinder screws
M5 x 14
Cylinder screws
M5 x 18
O-ring
Battery compartment
cover
Lever input unit
3.3 Axis length calculation input unit Primor RE
3.3.1 In connection with Primor 100 3.3.2 Panel hole spindle
A
L
Spindle:
Debur the ends
A
L
A
L
Türlochbohrung
Türlochbohrung
mind. ø9 - max. ø10,6
mind . ø10,6 - max. ø11,4
min. Ø 10.6 mm/max. Ø 11.4 mm
L = A + 35 mm (tolerance -2 mm)
4
Installation instructions Primor
3.4 Mounting input unit
3.4.1 Drill pattern Primor RE (lock is closing towards the right) - (closing towards the left inversely)
Ø 11,4
60 145
15
15
130
30
30
30
100
Opening for cable
2 x Fixing position for
screws M5 x 14
2 x Fixing position
for screws M5 x 18
• From the front 4 threaded holes M5 with sufficient depth thread and 1 through-hole (opening for cable/Spindle)
have to be drilled into the safe door.
3.4.2 Cable guidance Primor RE 3.4.3 Cable guidance/Plug position Primor RE
Spindle
O-ring
Lock
• Lead the connection cable through the Spindle.
• Push the cable and the O-ring in the direction of the arrow until the inset.
• Connect the plug of the cable with the plug on the circuit board. Attention: Don’t put the connection cable under tensile stress.
• Fix the input unit from the front with the enclosed cylinder screws M5.
• Install covering caps and battery compartment cover (see 3.2.1).
5
Installation instructions Primor
4 Installation input unit Primor FE
4.1 Input unit Primor FE 4.1.1 Dimensions Primor FE
52,5
83
11,5
156
26
4.2 Installation overview
4.2.1 Input unit Primor FE
Axe profile M5 x 14
Cylinder screw
M5 x 18
Black covering cap
Battery compartment cover
6
Installation instructions Primor
4.3 Mounting input unit
4.3.1 Drill pattern Primor FE (lock is closing towards the right) - (closing towards the left inversely)
11,5 100
30
• From the front 3 threaded holes M5 with sufficient thread depth and 1 through-hole (opening for cable/Spindle)
have to be drilled into the safe door.
4.3.2 Plug position Primor FE
Lock
• Connect the plug of the cable with the plug on the circuit board. Attention: Don’t put the connection cable under tensile stress.
• Fix the input unit from the front with the enclosed cylinder screws M5.
• Install covering caps and battery compartment cover (see 4.2.1).
7
Installation instructions Primor
5 Installation input unit Primor RO
5.1 Input unit Primor RO 5.1.1 Dimensions Primor RO
5.2 Installation overview
5.2.1 Input unit Primor RO
Fixing ring for input unit
4 Cylinder screws M4 x 10
Spindle for
turnable input unit
Input unit
Connection cable
5.3 Panel hole Primor RO (turnable)
5.3.1 Spindle square 5.3.2 Spindle round
Türlochbohrung
Türlochbohrung
mind. ø9 - max. ø10,6
mind . ø10,6 - max. ø11,4
min. Ø 10.6 mm/max. Ø 11.4 mm
Türlochbohrung
Türlochbohrung
mind. ø9 - max. ø10,6
mind . ø10,6 - max. ø11,4
min. Ø 9 mm/max. Ø 11.4 mm
8
Installation instructions Primor
5.4 Axis length calculation input unit Primor RO (drehbar)
5.4.1 In connection with Primor 100 5.4.2 In connection with Primor 2000
A
L
A
L
A
L
Spindle:
Debur the ends Spindle:
Debur the ends
L = A + 43mm (Toleranz - 4mm)
A
L
L = A + 43mm (Toleranz - 4mm)
A
L
L = A + 43mm (Toleranz - 4mm)
A
L
L = A + 28 mm (tolerance -4 mm) L = A + 43 mm (tolerance -4 mm)
5.4.3 In connection with boltwork
L = 15mm + A + X
A15X
Achse in axialer Richtung
gegen verschieben sichern
L
L = 15mm + A + X
A1
5X
Achse in axialer Richtung
gegen verschieben sichern
L
Secure the axis
against shifting in
axial direction
Spindle:
Debur the ends
L = X + A + 15 mm (+ axial hedge)
9
Installation instructions Primor
5.5 Mounting input unit
5.5.1 Drill pattern fixing with 4 threaded holes Primor RO
4 x Fixing position for M4
Hole center congruent with middle
axis of nut of the electronic lock
Opening for cable
• From the front 4 threaded holes M4 with sufficient thread depth and 1 through-hole (opening for cable/Spindle)
have to be drilled into the safe door.
• From the front the fixing ring has to be fixed with the enclosed cylinder screws M4 x 10.
5.5.2 Drill pattern fixing with 8 threaded holes Primor RO
78
78
4,3
4,3
41,5
41,5
4
4,3
78
78
4,3
4,3
41,5
41,5
4
4,3
Opening for cable
4 x fixing positions for
screws M4
- oprionally Ø 41.5 mm
or Ø 78 mm
Hole center congruent with middle
axis of nut of the electronic lock
• From the front 4 threaded holes M4 with sufficient depth thread and 1 through-hole (opening for cable/Spindle)
have to be drilled into the safe door.
• From the front the fixing ring has to be fixed with the enclosed cylinder screws M4 x 10.
5.5.2 Mounting input unit Primor RO
Position 1
20°
Position 2
• Position 1: Mount the input unit with an angle of approx. 20° to the fixing ring.
• Position 2: Turn the input unit to the right into position. The turning has to happen easily.
10
Installation instructions Primor
5.5.3 Input unit Primor RO (fixed)
Fixing ring with 4 threaded holes
5.5.4 Input unit Primor RO (fixed)
Fixing ring with 8 threaded holes
Drill-hole Ø 3,4
mm in the safe door
to fix the input unit
• Fit input unit of approx. 20° (see 5.5.2), adjusting and
insert grub screw M3 x 6 or arrest pin.
• Fit input unit of approx. 20° (see 5.5.2), adjusting and
insert clip.
5.5.5 Cable guidance Primor RO (drehbar) 5.5.6 Plug position Primor RO
Spindle
Lock
• Lead connection cable through the input unit.
• Insert the Spindle into the input unit from behind.
• Lead connection cable through the input unit and connect the plug.
Altri manuali per Primor Series
1
Questo manuale è adatto per i seguenti modelli
11
Indice
Altri manuali Wittkopp Serratura
Wittkopp
Wittkopp Insys 7202 Manuale utente
Wittkopp
Wittkopp Primor P30 Series Manuale utente
Wittkopp
Wittkopp Primor Series Manuale utente
Wittkopp
Wittkopp Primor Level 25 Manuale utente
Wittkopp
Wittkopp BlueCam greendot Manuale utente
Wittkopp
Wittkopp FinKey Manuale utente
Wittkopp
Wittkopp GATOR F Manuale utente
Wittkopp
Wittkopp Anchor 7000 Manuale utente
Wittkopp
Wittkopp TwinLock 7220 Manuale utente
Wittkopp
Wittkopp Primor 100 Manuale utente
Wittkopp
Wittkopp Anchor 4000 Series Manuale utente
Wittkopp
Wittkopp Anchor 2600 Guida utente
Wittkopp
Wittkopp Primor 3000 Manuale utente
Wittkopp
Wittkopp Primor 1600 Guida utente
Wittkopp
Wittkopp Primor Level 5 Manuale utente
Wittkopp
Wittkopp ElCom 7205 Manuale utente
Wittkopp
Wittkopp SmartCam Manuale utente
Wittkopp
Wittkopp ANCHOR Manuale utente
Wittkopp
Wittkopp Anchor 7000 Guida
Wittkopp
Wittkopp Primor 2600 Guida utente
