Workrite Ergonomics Metro 6 Manuale di programmazione

1 of 2 Workrite Ergonomics | (800) 959–9675 www.workriteergo.com

AMetro Keyboard

Platform

Qty: 1 D⅜" #10-32 Keps Nuts

Qty: 4

ECable Clips

Qty: 3 FFriction Pads

Qty: 2

C#10-32 × ½" Flat

Head Screw

Qty: 4

BMouse Pad

Qty: 1

Parts Included Hardware Kit #AKP-HDWR-ULT

Tools RequiredRequired

Assembly & Installation Instructions:

Keyboard Mounting:

Wrench with ⅜" socket

#2 Phillips screwdriver or drill/driver

Adjustable Keyboard Arm

Mount Keyboard Platform to Arm

Place the Keyboard Platform (A) on the keyboard

arm and align the four holes on the platform with

the four holes in the arm.

Insert the #10-32 × ½" Flat Head Screws (C)

through holes on platform, through the holes in

the arm and fasten using four ⅜" #10-32 Keps

Nuts(D). Tighten securely using Phillips head

screwdriver.

Configuring Optimizer Models for Le Handed Use

Metro Platforms are pre-configured for right

handed use but can easily be converted to le

handed use.

Remove the Wrist Rest by removing the two

Phillips Head Wood Screws and Washers from the

right two hole locations and reattach in the le

two hole locations. Apply the Mouse Pad on le in

Step 3.

Note: Mount your keyboard arm to your worksurface using the instructions that came with your keyboard arm.

Metro

aKeyboard Arm

Phillips screws & washers

Wrist Rest

Worksurface

2 of 2 Workrite Ergonomics | (800) 959–9675 www.workriteergo.com

1500356 Rev B

Attach Cable Clips and Route Keyboard and Mouse Cords

Note: Make sure your keyboard arm is fully

extended before routing your cables.

Place one Cable Clip (E) on the side of the arm

mechanism. Place the other Cable Clip on the

rear of the track. Do the opposite side in the

same fashion if cords run down the le side.

Route the Keyboard and mouse cords through

Cable Clips and be sure to leave enough slack

in cord to allow for unrestricted movement of

the mouse.

Place Mouse Pad

Peel the backing o the Mouse Pad (B) and place in

either the right handed or le handed location. The

Mouse Pad provides improved traction and pointing

accuracy. It can be repositioned by simply peeling it up

and placing it elsewhere.

Apply Friction Pads

Place Friction Pads (F) on the bottom surface of your keyboard

to keep it in place, if necessary. The Friction Pads will keep your

keyboard from sliding when the platform is angled.

Caution: Adhesion is designed to bond

immediately. You will not be able to

reposition the clip once it's in place.

Consult the User Guide for your Leader Arm

Go to www.workriteergo.com/instructions to find

the Leader Arm User Guide for instructions on

how to set up this product for ideal ergonomic

benefit.

Under Worksurface

Arm fully extended

Cables will be out of the way

when platform is in use

6Consult the Leader

Arm User Guide for

complete instructions

Indice

Altri manuali Workrite Ergonomics Rack e supporto

Workrite Ergonomics

Workrite Ergonomics PEAK-2DA-CCG-S Manuale utente

Workrite Ergonomics

Workrite Ergonomics CONF-2SDS-WOPB-S Manuale di programmazione

Workrite Ergonomics

Workrite Ergonomics Sequoia SQ-422 Manuale utente

Workrite Ergonomics

Workrite Ergonomics CONF-ACC-1EXT-S Manuale di programmazione

Workrite Ergonomics

Workrite Ergonomics CONF-3SDS-WOPB-S Manuale di programmazione

Workrite Ergonomics

Workrite Ergonomics Sequoia SQ-523 Manuale utente

Workrite Ergonomics

Workrite Ergonomics CONF-2SDA-WOB-S Manuale di programmazione

Workrite Ergonomics

Workrite Ergonomics Conform Base CONF-BSE-TSB-S Manuale di programmazione

Workrite Ergonomics

Workrite Ergonomics Sequoia SQ-211 Manuale utente

Workrite Ergonomics

Workrite Ergonomics Conform CONF-1SDS-WOPB-S Manuale di programmazione

Workrite Ergonomics

Workrite Ergonomics Sequoia SQ-101 Manuale utente

Workrite Ergonomics

Workrite Ergonomics Sequoia SQ-202 Manuale utente

Workrite Ergonomics

Workrite Ergonomics CONF-BSE-WP-S Manuale di programmazione

Workrite Ergonomics

Workrite Ergonomics 920 Series Manuale utente

Workrite Ergonomics

Workrite Ergonomics Sequoia SQ-312 Manuale utente

Workrite Ergonomics

Workrite Ergonomics Willow Dual Guida rapida

Workrite Ergonomics

Workrite Ergonomics Sequoia SQ-633 Manuale utente

Workrite Ergonomics

Workrite Ergonomics CONF-ADPT-DA-S Manuale di programmazione

Workrite Ergonomics

Workrite Ergonomics Sequoia SQ-303 Manuale utente

Workrite Ergonomics

Workrite Ergonomics Sequoia SQ-413 Manuale utente

Workrite Ergonomics

Workrite Ergonomics Conform Sit-to-Stand Arm Manuale di programmazione

Workrite Ergonomics

Workrite Ergonomics PEAK-1SA-CCG-S Manuale utente

Workrite Ergonomics

Workrite Ergonomics Conform LT CONF-LT-2SA-TPCG-G Manuale di programmazione

Workrite Ergonomics

Workrite Ergonomics Conform CONF-1SDA-WOB-S Manuale di programmazione

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente