Worx MAKERX WA7160 Manuale utente
WA7160 WA7161
Original instructions
Originalbetriebsanleitung
Notice originale
Istruzioni originali
Manual original
Manual original
Oorspronkelijke gebruiksaanwijzing
Original brugsanvisning
Opprinnelige Instruksjonene
Bruksanvisning i original
Instrukcja oryginalna
Ω ΔΩ
Eredeti használati utasítás
Instrucţiuni originale
Původní návod k používání
Pôvodný návod na použitie
Izvirna navodila
P05
P11
P17
P23
P29
P35
P41
P47
P53
P59
P65
P71
P77
P83
P89
P95
P101
EN
D
F
I
ES
PT
NL
DK
NOR
SV
PL
GR
HU
RO
CZ
SK
SL
EN
D
F
I
ES
PT
NL
DK
NOR
SV
PL
GR
HU
RO
CZ
SK
SL
2
31
5
6
4
A B
C D
E
5
EN
GENERAL POWER TOOL SAFETY WARNINGS
WARNING Read all safety warnings and instructions.
Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without
supervision.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR HUB
1. Before charging, read the instructions.
2. Do not use hub for works other than those for which they are designed.
3. The charging device must be protected from moisture.
4. Do not use the charging device outdoors.
5. Do not open the unit and keep it out of the reach of children.
6. Ensure that the connection between the hub and your equipment is correctly
positioned.
7. Keep hub’s slots free of foreign objects and protect against dirt and humidity. Store in a
dry and frost-free place.
8. When charging your equipment, ensure that the hub is in a well-ventilated area and
away from inflammable materials. Ensure that your equipment and hub are not left
unsupervised during charging.
9. Longer life and better performance can be obtained if your equipment is charged when
the air temperature is between 15°C and 25°C. Do not charge your equipment in air
temperatures below 0°C, or above 45°C.
10. Disconnect from your equipment when not charging or the charging is over.
20V Hub/HubX is specially designed to work with 20V MakerX series tools
BELOW, so do not attempt to use any other devices.
Category Model
20V Cordless Rotary Tool WX739 WX739.X
20V Cordless Angle Grinder WX741 WX741.X
20V Cordless Air Brush WX742 WX742.X
20V Cordless Mini Heat Gun WX743 WX743.X
20V Cordless Wood & Metal Crafter WX744 WX744.X
6
EN
SAFETY WARNINGS FOR BATTERY PACK
a) Do not dismantle, open or shred cells or battery pack.
b) Do not short-circuit a battery pack. Do not store battery packs
haphazardly in a box or drawer where they may short-circuit each other
or be short-circuited by conductive materials.
When battery pack is not in use,
keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other
small metal objects, that can make a connection from one terminal to another. Shorting
the battery terminals together may cause burns or a fire.
c) Do not expose battery pack to heat or fire. Avoid storage in direct
sunlight.
d) Do not subject battery pack to mechanical shock.
e) In the event of battery leaking, do not allow the liquid to come into
contact with the skin or eyes. If contact has been made, wash the
affected area with copious amounts of water and seek medical advice.
f) Seek medical advice immediately if a cell or battery pack has been
swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with a clean dry cloth if they become
dirty.
i) Battery pack needs to be charged before use. Always refer to this
instruction and use the correct charging procedure.
j) Do not maintain battery pack on charge when not in use.
k) After extended periods of storage, it may be necessary to charge
and discharge the battery pack several times to obtain maximum
performance.
l) Battery pack gives its best performance when it is operated at normal
room temperature (20°C ± 5°C).
m) When disposing of battery packs, keep battery packs of different
electrochemical systems separate from each other.
n) Recharge only with the charger specified by Worx. Do not use
any charger other than that specifically provided for use with the
equipment.
A charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
o) Do not use any battery pack which is not designed for use with the
equipment.
p) Keep battery pack out of the reach of children.
q) Retain the original product literature for future reference.
r) Remove the battery from the equipment when not in use.
s) Dispose of properly.
t) Do not mix cells of different manufacture, capacity, size or type within a
device.
u) Do not remove battery pack from its original packaging until required for
use.
v) Observe the plus (+) and minus (–) marks on the battery and ensure
correct use.
7
EN
SYMBOLS
Read the operator’s manual.
Caution
For indoor use only
Do not burn
Batteries may enter water cycle if disposed improperly, which can
be hazardous for ecosystem. Do not dispose of waste batteries as
unsorted municipal waste.
Li-I on
Li-Ion battery. This product has been marked with a symbol relating
to ‘separate collection’ for all battery packs and battery pack. It will
then be recycled or dismantled in order to reduce the impact on the
environment. Battery packs can be hazardous for the environment
and for human health since they contain hazardous substances.
Waste electrical products must not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authorities or retailer for recycling advice
8
EN
COMPONENT LIST
1. ONOFF SWITCH
2. USB PORT
3. SPEED CONTROL BUTTON
4. BELT CLIP
5. FLEXIBLE POWER CORD
6. POWER CONNECTOR
* Not all the accessories illustrated or described are included in standard
delivery.
TECHNICAL DATA
WA7160 WA7161
Output 20 V 10 A, Max. Output : 20 V 10 A, Max.
or Output : 5 V 2 A (USB port)
Input 20 V 10 A, Max.
Battery type Lithium battery
Battery pack voltage 20 V
Weight 80 g
Category Model Capacity
20V Battery
WA3551 2.0Ah
WA3551.1 2.0Ah
WA3014 4.0Ah
WA3556 5.0Ah
We recommend that you purchase your accessories listed in the above list from
the same store that sold you the tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
9
EN
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.
ASSEMBLY
1. Insert battery pack into the hub. (See Fig. A)
2. Connect the hub and MakerX series tools. (See Fig. B)
WARNING: Before operation, make sure the speed control button on the
hub is at the“Min“ position. (See Fig. C)
OPERATION
1. Confirm the speed control button is set to “Min”. Grasp the tool by the grip.Press
the on/off switch to start. (See Fig. D)
2. Adjust the variable speed as needed for the tool and application.
3. Press the on/off switch on the hub to turn off after use.
NOTE For sake of safety, disconnect from the hub and adjust the speed control to
“Min” position once completing the operation.
4. With a USB port (output: 5 V, 2 A) (only for specific models), your hub can be
connected to a LED light, or used to charge small electronics or tools such as cell
phones, cordless screwdrivers, tablets, etc.. (See Fig. E)
MAINTENANCE
There are no repairable parts in your hub.
For adjustment, repair or maintenance, please leave it to the professional. Do not try
to repair the hub yourself.
Your hub does not need to be lubricated or otherwise maintained. Don’t clean the
hub with water or chemical cleaning agent, just wipe it with a dry cloth. Store in a dry
environment.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authorities or
retailer for recycling advice.
10
EN
DECLARATION OF CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description 20V Hub/HubX
Type WA7160 WA7161
Complies with the following Directives:
2011/65/EU&(EU)2015/863
2014/30/EU
Standards conform to
EN 55014-1
EN 55014-2
EN 62368-1 (Only for WA7161)
2020/07/22
Allen Ding
Deputy Chief Engineer,Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
Altri manuali per MAKERX WA7160
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
