Woxcon NPG-EX60-H2 Guida utente
2020V1.6
Quick Operation Guide
NPG-EX60-H2
18G HDMI V2.0 Cost-effective Extender Set over CAT5e/CAT6
The NPG-EX60-H2 is a cost-effective point-to-point extender set for HDMI V2.0 and IR
signals; this kit supports 4K/UHD video @ 60 Hz with 4:4:4 Chroma sampling, as well as
HDMI data rates up to 18Gbps, HDCP 2.2 compliant; It provides HDMI transmission up to
230 feet (70 meters) for 4K@60Hz 4:4: 4 or 1080p, over single CAT5e/6 cable. It supports
video resolution down-scaling, the 4K input can be automatically downscale to 1080p output
for compatibility with 1080p display.
Features
§ Supports HDMI V2.0, up to 4K@60Hz 4:4:4, HDR 10, 18G, HDCP 2.2.
§ Extends 4K or 1080p HDMI signal up to 230 feet (70m) over a single CAT5e/6 cable.
§ HDMI loop out on transmitter.
§ Bi-directional IR pass-through.
§ Supports video resolution down-scaling, the 4K input can be automatically degraded to
1080p output on receiver for compatibility with legacy 1080p display device.
§ Features visually lossless compression with no latency.
§ Smart EDID management.
§ Compact design, easy to install and simple to operate.
Packing List
§ 1x Transmitter (Tx)
§ 1x Receiver (Rx)
§ 1x IR Receiver
§ 1x IR Emitter
§ 2x Velcro Strips
§ 1x Power Adaptor (12V DC 1A)
§ 1x User Manual
2020V1.6
Transmitter Panel Description
1.
CATx OUT:
RJ45 port to connect the CATx IN port of receiver by CATx cable. It
supports 12V PoC to power the receiver. The orange LED illuminates when there is a
valid HDMI signal input. The green LED illuminates when power is applied.
2.
IR IN:
3.5mm mini jack to connect IR receiver for IR pass-through.
3.
IR OUT:
3.5mm mini jack to connect IR emitter for IR pass-through.
4.
DISPLAY:
Type-A female HDMI port to connect HDMI display device.
5.
SOURCE:
Type-A female HDMI port to connect HDMI source device.
6.
DC 12V:
DC connector for the power adapter connection.
7.
EDID Management:
§ EDID BYPASS: Press the button with paper clip or other sharp tool to learn the
EDID from the remote display connected to the Receiver’s HDMI out.
§ EDID COPY Tx/3s: Press and hold the button for 3 seconds to copy the EDID from
the local display connected to the Transmitter’s HDMI out.
§ DEFAULT: Factory default, the source device learns EDID from the TV which has
the lowest resolution. Press and hold the button while the product is in turned-off
period, and then release the button after 6 seconds of power on can restore the
default setting.
Note:
If the standard resolution of the local display is lower than the receiver‘s, the unit
will output the video with the lower resolution to ensure video can be shown on both
displays.
EDID BYPASS
EDID COPY Tx/3s
IR OUTIR IN
CATx OUT DISPLAY SOURCE DC 12V
123456
7
2020V1.6
Receiver Panel Description
1.
DISPLAY:
Type-A female HDMI port to connect HDMI display device.
2.
CATx IN:
RJ45 port to connect the CATx OUT port of transmitter by CATx cable. It
supports 12V PoC and the receiver can be powered from the transmitter. The orange
LED illuminates when there is a valid HDMI signal input. The green LED illuminates when
power is applied.
3.
IR IN:
3.5mm mini jack to connect IR receiver for IR pass-through.
4.
IR OUT:
3.5mm mini jack to connect IR emitter for IR pass-through.
Connection Diagram
2020V1.6
Specifications
Transmitter
Input
(1) SOURCE
Input Connector
(1) 19-pin type-A female HDMI
Output
(1) DISPLAY, (1) CATx OUT
Output Connector
(1) 19-pin type-A female HDMI, (1) RJ45
Control
(1) IR IN, (1) IR OUT
Control Connector
(2) 3.5mm mini jacks
Receiver
Input
(1) CATx IN
Input Connector
(1) RJ45
Output
(1) DISPLAY
Output Connector
(1) 19-pin type-A female HDMI
Control
(1) IR IN, (1) IR OUT
Control Connector
(2) 3.5mm mini jacks
General
Video Resolution
Up to 4K@60Hz 4:4:4, HDR 10
HDMI Audio Format
Supports LPCM 2ch, LPCM 5.1ch, LPCM 7.1ch, Dolby
Digital 2ch, Dolby Digital 5.1ch, DTS 2ch, DTS 5.1ch, DTS
96/24 5.1ch.
Transmission Distance
4K/1080p ≤ 70 meters (230ft)
Note that the CATx cable length should not be less than 15
meters for best video output..
HDMI Version
HDMI V2.0
HDCP Version
HDCP 2.2 compliant. (The HDCP of output follows the
HDCP version of display device.)
EDID
EDID management
Power Supply
Input: 100VAC~240VAC, 50/60Hz;
Output: 12VDC 1A
Power Consumption
4W (Max)
Operation Temperature
-5~55℃
Storage Temperature
-25~70℃
Relative Humidity
10%-90%
Dimensions (W*H*D)
80mm x 16.8mm x 80mm
Net Weight
Tx/Rx: 70g
Note: The extender set does not support HBR audio.
Indice
Altri manuali Woxcon Estensione
Woxcon
Woxcon CE-EX60-H2 Manuale utente
Woxcon
Woxcon NPG-EX80 Guida utente
Woxcon
Woxcon TPUH407-US Manuale utente
Woxcon
Woxcon TPUH422 Manuale utente
Woxcon
Woxcon TPUH703 Manuale utente
Woxcon
Woxcon IPA200 Manuale utente
Woxcon
Woxcon CE-EX30DP Manuale utente
Woxcon
Woxcon CE-EX50 Manuale utente
Woxcon
Woxcon IPA100 Manuale utente
Woxcon
Woxcon IPA400TR-P Manuale utente
Woxcon
Woxcon TPUH451 Manuale utente
Woxcon
Woxcon LR-EX1 Manuale utente
Woxcon
Woxcon TPUH412 Manuale utente
Woxcon
Woxcon WL-HDMI Manuale utente
Woxcon
Woxcon TPUH630 Manuale utente
Woxcon
Woxcon TPUH4120 Manuale utente
Woxcon
Woxcon IPA300TR Manuale utente
Woxcon
Woxcon TPA33 Manuale utente
Woxcon
Woxcon TPU4120 Manuale utente
Woxcon
Woxcon NPG-EX10KVM Guida utente
