Woxcon NPG-EX80 Guida utente

Quick Operation Guide

NPG-EX80

HDMI Extender over CAT5e/CAT6

The NPG-EX80 is a cost-effective point-to-point extender set for HDMI V1.4 and IR signals.

The extender supports 4K@30Hz with 4:4:4 Chroma sampling along with HDMI data rates

up to 10.2Gbps and HDCP 1.4 compliant. The NPG-EX80 provides HDMI transmission up

to 393 feet (120 meters) for 4K@30Hz 4:4:4 or 1080p, over single CAT5e/6 cable. The

extender supports video resolution down-scaling allowing the 4K input to be automatically

downscale to 1080p output for compatibility with 1080p display.

Features

§ Supports HDMI V1.4, up to 4K@30Hz 4:4:4, HDCP 1.4.

§ Extends 4K or 1080p HDMI signal up to 393 feet (120m) over a single CAT5e/6 cable.

§ HDMI loop out on transmitter.

§ Bi-directional IR pass-through.

§ Supports video resolution down-scaling, the 4K input can be automatically degraded to

1080p output on receiver for compatibility with legacy 1080p display device.

§ Features visually lossless compression with no latency.

§ Smart EDID management.

§ Compact design, easy to install and simple to operate.

Packing List

§ 1x Transmitter (Tx)

§ 1x Receiver (Rx)

§ 1x IR Receiver

§ 1x IR Emitter

§ 2x Velcro Tape

§ 1x Power Adaptor (12V DC 1A)

§ 1x Quick Operation Guide

Transmitter Panel Description

CATx OUT:

RJ45 port to connect the CATx IN port of receiver by CATx cable. It supports

12V PoC to power the receiver. The orange LED illuminates when there is a valid HDMI

signal input. The green LED illuminates when power is applied.

IR IN:

3.5mm mini jack to connect IR receiver for IR pass-through.

IR OUT:

3.5mm mini jack to connect IR emitter for IR pass-through.

DISPLAY:

Type-A female HDMI port to connect HDMI display device.

SOURCE:

Type-A female HDMI port to connect HDMI source device.

DC 12V:

DC connector for the power adapter connection.

EDID Management:

§ EDID BYPASS: Press the button with paper clip or other sharp tool to learn the

EDID from the remote display connected to the Receiver’s HDMI out.

§ EDID COPY Tx/3s: Press and hold the button for 3 seconds to copy the EDID from

the local display connected to the Transmitter’s HDMI out.

§ DEFAULT: Factory default, the source device learns EDID from the TV which has

the lowest resolution. Press and hold the button while the product is in turned-off

period, and then release the button after 6 seconds of power on can restore the

default setting.

Note:

If the standard resolution of the local display is lower than the receiver‘s, the unit

will output the video with the lower resolution to ensure video can be shown on both

displays.

1234567

Receiver Panel Description

CATx IN:

RJ45 port to connect the CATx OUT port of transmitter by CATx cable. It

supports 12V PoC and the receiver can be powered from the transmitter. The orange

LED illuminates when there is a valid HDMI signal input. The green LED illuminates when

power is applied.

IR IN:

3.5mm mini jack to connect IR receiver for IR pass-through.

IR OUT:

3.5mm mini jack to connect IR emitter for IR pass-through.

DISPLAY:

Type-A female HDMI port to connect HDMI display device.

1234

Specifications

Transmitter

Input

(1) SOURCE (19-pin type-A female HDMI)

Output

(1) DISPLAY (19-pin type-A female HDMI)

(1) CATx OUT (RJ45)

Control

(1) IR IN (3.5mm mini jack)

(1) IR OUT (3.5mm mini jack)

Receiver

Input

(1) CATx IN (RJ45)

Output

(1) DISPLAY (19-pin type-A female HDMI)

Control

((1) IR IN (3.5mm mini jack)

(1) IR OUT (3.5mm mini jack)

General

Video Resolution

Up to 4K@30Hz 4:4:4

HDMI Audio Format

Supports LPCM 2ch, LPCM 5.1ch, LPCM 7.1ch,

Dolby Digital 2ch, Dolby Digital 5.1ch, DTS 2ch, DTS

5.1ch, DTS 96/24 5.1ch.

Transmission Distance

4K/1080p ≤ 120 meters (393ft) (CAT6a/(F/FTP))

HDMI Version

Up to 1.4

HDCP Version

Up to 1.4. The HDCP of output follows the HDCP

version of display device.

EDID Management

Supported.

Power Supply

Input: 100 to 240V AC, 50/60Hz; Output: 12V DC 1A

Power Consumption

4W (Max)

Operation Temperature

-5 to +55℃ (+23° to +131°F)

Storage Temperature

-25 to +70℃ (-13° to +158°F)

Relative Humidity

10% to 90%, Non-condensing

Dimensions (W*H*D)

80mm x 16.8mm x 80mm

Net Weight

Tx: 65g, Rx: 60g

Note:

The extender set does not support HBR audio.

Connection Diagram

Resolution

CAT5e (FTP)

CAT6a (U/FTP)

1080p@60Hz

120m

4K@30Hz

120m

IR Emitter

Blu-Ray Remote

Receiver

Bedroom TV4K Blu- Ray

Tx Rx

Living Room TV

Power:

IR:

HDMI:

Catx:

Indice

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente