Xaar XJ128 Series Manuale utente

Guide to Operation

XJ128

High Performance

Ink Jet Printhead

XJ128/200

XJ128/200 Plus

XJ128/360

XJ128 Guide to Operation

Xaar Document no D031010302 Version A

Xaar Confidential

XJ128 and XJ128 Plus Printhead

XJ128 Guide to Operation Xaar Document no: D031010302 Version A Page 1

XAAR

XJ128 Guide to Operation

_______________________________

Xaar

Science Park

Cambridge

CB4 OXR

United Kingdom

Phone +44 (0) 1223 423663, Fax +44 (0) 1223 423590

XJ128 and XJ128 Plus Printhead

XJ128 Guide to Operation Xaar Document no: D031010302 Version A Page 2

Table of Contents

1Introduction....................................................................6

1.1 Overview ............................................................................................................................ 6

1.2 Safety instructions.............................................................................................................. 7

1.3 Disclaimer .......................................................................................................................... 7

2General Product Information .........................................8

2.1 The XJ128 printhead.......................................................................................................... 8

2.2 Xaar technology ................................................................................................................. 8

2.2.1 Xaar piezo technology................................................................................................... 8

2.3 Product handling and installation....................................................................................... 9

2.3.1 Anti-static precautions ................................................................................................... 9

2.3.2 Cleanliness.................................................................................................................... 9

2.3.3 Handling ........................................................................................................................ 9

2.3.4 Nozzle plate protective cap ........................................................................................... 9

2.3.5 Installation and pre-flushing........................................................................................... 9

2.3.6 “Hot-plugging”.............................................................................................................. 10

2.4 Storage and shipment...................................................................................................... 10

2.4.1 Storage conditions....................................................................................................... 10

2.4.2 Shipping conditions ..................................................................................................... 10

2.5 Product support................................................................................................................ 11

3Product Description.....................................................11

3.1 Parts description .............................................................................................................. 11

3.1.1 Actuator ....................................................................................................................... 11

3.1.2 Electrical connector ..................................................................................................... 11

3.1.3 Chassis........................................................................................................................ 11

3.1.4 Cover........................................................................................................................... 12

3.1.5 Driver chips.................................................................................................................. 12

3.1.6 Ink inlets and filter........................................................................................................ 12

3.1.7 Nozzle plate................................................................................................................. 12

3.1.7.1 XJ128/200 and XJ128/360................................................................................. 12

3.1.7.2 XJ128/200 Plus .................................................................................................. 12

3.1.8 Serial number .............................................................................................................. 12

3.2 Product specifications...................................................................................................... 13

3.2.1 Printhead life................................................................................................................ 14

4Mechanical Guide........................................................15

4.1 Channel numbering and side definition............................................................................ 15

4.2 Printhead mounting.......................................................................................................... 16

4.2.1 Printhead orientation ................................................................................................... 16

XJ128 and XJ128 Plus Printhead

XJ128 Guide to Operation Xaar Document no: D031010302 Version A Page 3

4.2.2 Printhead datum locations........................................................................................... 16

4.2.3 Print distance............................................................................................................... 17

4.2.4 Angle of printhead relative to substrate....................................................................... 17

4.3 Thermal management...................................................................................................... 18

4.3.1 Printhead temperature................................................................................................. 18

4.4 Ink connection.................................................................................................................. 19

4.5 Mechanical system design............................................................................................... 21

4.5.1 Printhead shock and vibration ..................................................................................... 21

4.5.2 Printhead enclosure..................................................................................................... 21

4.5.3 Multiple printheads ...................................................................................................... 21

4.5.4 Substrate / media or printhead motion ........................................................................ 21

5Electrical Functions .....................................................22

5.1 Function overview ............................................................................................................ 22

5.2 Signal level definition ....................................................................................................... 23

5.3 Signal descriptions........................................................................................................... 24

5.4 Electrical connection to the printhead .............................................................................. 25

5.5 Grounding and isolation ................................................................................................... 26

6Electrical Specifications and Data...............................27

6.1 Electrical requirements..................................................................................................... 27

6.1.1 Absolute maximum electrical ratings........................................................................... 27

6.1.2 Power supply sequencing............................................................................................ 27

6.1.3 Recommended electrical operating conditions............................................................ 29

6.1.4 Temperature compensation......................................................................................... 30

6.2 Data structure................................................................................................................... 31

6.2.1 Configuration data structure........................................................................................ 31

6.2.2 Cycle order .................................................................................................................. 31

6.2.3 Phase triggering .......................................................................................................... 32

6.2.4 Print data structure ...................................................................................................... 32

6.3 Electrical system design................................................................................................... 35

6.3.1 Power supply and grounding connections................................................................... 35

6.3.2 Cable lengths and signals ........................................................................................... 36

6.3.3 ESD and EMC considerations..................................................................................... 36

7Ink Supply System Design...........................................37

7.1 Ink supply materials compatibility..................................................................................... 37

7.2 Ink preparation ................................................................................................................. 37

7.2.1 Good ink ...................................................................................................................... 37

7.2.2 Ink filtration .................................................................................................................. 37

7.3 Providing a negative pressure ink supply......................................................................... 38

7.3.1 Gravity fed negative pressure ink supply..................................................................... 38

7.3.2 Vacuum fed negative pressure ink supply................................................................... 39

7.4 Ink supply system design................................................................................................. 39

XJ128 and XJ128 Plus Printhead

XJ128 Guide to Operation Xaar Document no: D031010302 Version A Page 4

7.4.1 Small ink reservoir....................................................................................................... 40

7.4.2 Ink pump system.......................................................................................................... 40

7.4.3 System filter................................................................................................................. 40

7.4.4 Ink tubing..................................................................................................................... 40

7.5 Filling the printhead and supply system........................................................................... 40

7.5.1 Cleaning the ink supply system................................................................................... 40

7.5.2 Filling the printhead ..................................................................................................... 41

8Maintenance, Reliability and Lifetime..........................43

8.1 Printhead maintenance .................................................................................................... 43

8.1.1 Why printhead maintenance........................................................................................ 43

8.2 Maintenance strategies.................................................................................................... 43

8.2.1 Operational maintenance ............................................................................................ 43

8.2.2 Short-term maintenance.............................................................................................. 44

8.2.3 Long-term maintenance............................................................................................... 44

8.3 Printhead maintenance methods ..................................................................................... 44

8.3.1 Pressure purge............................................................................................................ 44

8.3.2 Vacuum purge ............................................................................................................. 45

8.3.3 Wiping.......................................................................................................................... 45

8.3.4 Vacuum wiping ............................................................................................................ 46

8.3.5 Blotting......................................................................................................................... 46

8.3.6 Ink Spitting................................................................................................................... 47

8.3.7 Capping ....................................................................................................................... 47

9Image Processing........................................................48

9.1 Image processing background......................................................................................... 48

9.1.1 File formats.................................................................................................................. 48

9.1.2 Image processing software.......................................................................................... 49

9.1.3 Colour spaces.............................................................................................................. 49

9.2 Processing an image........................................................................................................ 50

9.2.1 Process flow ................................................................................................................ 50

9.2.2 Resolution and sizing .................................................................................................. 51

9.2.3 Changing colour space................................................................................................ 52

9.2.4 Ink control.................................................................................................................... 52

9.2.5 Splitting ink channels................................................................................................... 53

9.2.6 Binary patterning methods........................................................................................... 54

9.2.7 Saving an image for printing........................................................................................ 55

9.2.8 XJ128 image transformation........................................................................................ 56

9.2.8.1 Printing angle and horizontal / vertical resolution ratios..................................... 56

9.2.8.2 Extraction of image data..................................................................................... 57

10Trouble Shooting.........................................................59

10.1 Printhead problems.......................................................................................................... 59

10.2 Returning printhead(s) to Xaar......................................................................................... 59

XJ128 and XJ128 Plus Printhead

XJ128 Guide to Operation Xaar Document no: D031010302 Version A Page 5

11Feedback and Support................................................60

11.1 Feedback ......................................................................................................................... 60

11.2 Support............................................................................................................................. 60

Appendices......................................................................61

Appendix A, Environmental Considerations .................................................................................. 61

Recycling packaging materials.................................................................................................. 61

Recycling the printhead............................................................................................................. 61

Appendix B, Document History and Changes ............................................................................... 62

Revision history......................................................................................................................... 62

Document changes ................................................................................................................... 62

Appendix C, Patents, Trademarks and Product Marking............................................................... 63

Patents...................................................................................................................................... 63

Trademarks............................................................................................................................... 63

Product marking........................................................................................................................ 63

Copyright................................................................................................................................... 63

Safety standards ....................................................................................................................... 63

CE Compliance and working environment................................................................................ 64

Appendix D, Mechanical drawing .................................................................................................. 65

Appendix E, The Xaar flex-cable................................................................................................... 66

Glossary ..........................................................................67

Index................................................................................68

XJ128 and XJ128 Plus Printhead

XJ128 Guide to Operation Xaar Document no: D031010302 Version A Page 6

1 Introduction

1.1 Overview

This document is only valid for the Xaar XJ128 product. This document is provided to supply details

and information relating to the XJ128 printhead and it’s operation. The document will cover the

following sections:

 Introduction

 General Product Information

 Product Description

 Mechanical Guide

 Electrical Functions

 Electrical Specifications and Data

 Ink Supply System Design

 Maintenance, Reliability and Lifetime

 Image Processing

 Trouble Shooting

 Feedback and Support

 Appendices

This edition applies to the above product only and to all subsequent releases and modifications until

otherwise indicated in new editions. Changes are made occasionally to the information herein; any

such changes will be reported in subsequent revisions.

Note that the use of this symbol indicates that the text you are reading is critically

important and the instruction should be observed.

This document will make references to other Xaar documents, which should be used in conjunction

with this referenced material.

Please address any comments to:

Sales Engineering

Xaar plc

Science Park

Cambridge

CB4 OXR

United Kingdom

XJ128 and XJ128 Plus Printhead

XJ128 Guide to Operation Xaar Document no: D031010302 Version A Page 7

1.2 Safety instructions

Although all efforts have been made to ensure that the XJ128 is safe for use, Xaar cannot be held

responsible for any incidents or injuries resulting from mishandling or misuse. It is important to

ensure that liquid does not come into contact with electrical areas and that appropriate safety

precautions are taken when using the XJ128 printhead.

1.3 Disclaimer

This manual is intended as a guide for the installation and use of the Xaar XJ128 printhead and the

contents are believed to be accurate at the time of compilation. Xaar assumes no liability for direct or

indirect damage or loss incurred due to errors, omissions, discrepancies or changes between the

equipment and it’s documentation and does not give any representation, condition or warranty

(whether express or implied, by law, custom or otherwise) as to its accuracy, completeness or

correctness, or its fitness for purpose, or that use of a device described herein or reproduction of the

contents will not infringe any rights of any third party or otherwise whatsoever, and the user agrees

that it has not relied on any. Information in this manual is intended for reference only. Equipment and

documentation is subject to change without notice.

In no circumstances shall Xaar have any liability whatsoever for any loss or damage, howsoever

arising, and whether direct, indirect, consequential, financial or otherwise in any way from any use of

or reliance placed on or otherwise in connection with the contents of this manual or use of a device

described herein. The foregoing shall not exclude any liability, which cannot by law be excluded.

No license, either expressed or implied or otherwise, is granted under any patents, copyrights or

other intellectual property rights of Xaar.

No part of this document may be copied or reproduced in any form or by any means without the prior

written consent of Xaar.

XJ128 and XJ128 Plus Printhead

XJ128 Guide to Operation Xaar Document no: D031010302 Version A Page 8

2 General Product Information

2.1 The XJ128 printhead

The XJ128 inkjet printhead consists of a piezo based, 128-channel actuator with ink-supply filter and

drive circuitry mounted on a metallic chassis. The printhead is available in three different models.

Each model operates in a ‘binary’mode, thus ejecting a single sized drop upon demand.

2.2 Xaar technology

As with all Xaar technology products the

printhead utilises Xaar’s patented shear

mode, shared wall piezo based

technology.

2.2.1 Xaar piezo technology

Xaar’s printhead technology is based upon a piezo ceramic material (PZT). When a voltage is

applied across this material the material distorts or bends. Xaar uses this phenomenon by machining

rows of parallel channels into a PZT block. An electrode is then placed onto the sides of the channel

walls allowing a voltage to be applied across it. The way in which Xaar makes the wall bend due to

the applied voltage is known as “shear mode.”Two channels share the wall, and hence the term

“shared wall.”

These channels are filled with ink and a pressure wave inside the ink is generated due to the

distortion of the PZT walls. This pressure wave forces ink out of the end of the channels via the

printheads nozzle.

XJ128 and XJ128 Plus Printhead

XJ128 Guide to Operation Xaar Document no: D031010302 Version A Page 9

2.3 Product handling and installation

2.3.1 Anti-static precautions

Xaar printheads are static sensitive devices, which can be damaged if they are touched

without the necessary precautions being taken.

Xaar printheads are supplied in antistatic packaging. These should only be opened and handled in

an anti-static or electrostatic protected area (EPA). Unpacking and handling of the printheads should

be performed with the correct electrostatic discharge (ESD) precautions such as a grounded wrist

strap and conductive work mat.

2.3.2 Cleanliness

Xaar printheads are precision devices and should be treated as such. It is essential to

carry out all installation and development in as clean an environment as possible.

2.3.3 Handling

The nozzle plate on the printhead is sensitive to handling. On two models of the XJ128

printhead, the nozzle plate has a special coating, called a non-wetting coating (NWC).

This keeps the nozzle plate free of excess ink. Contact with this surface must be

avoided to prevent damage to this coating. Damage to this coating can cause a

reduction in the performance of the printhead. With all models of the XJ128 printhead,

contact with the nozzle plate surface must be minimised to avoid damage to the nozzle

plate.

2.3.4 Nozzle plate protective cap

The nozzle plate is protected during shipment by a plastic protective guard. This must

be carefully taken off prior to the printhead being filled with ink.

2.3.5 Installation and pre-flushing

The XJ128 printhead is supplied having been through a series of printing tests as part

of the manufacture. There will be some residual print test fluid within the printhead. In

some cases, the residual fluid will be incompatible with the ink to be used with the

printhead. In such cases, the printhead will require additional pre-flushing using

approved flushing fluids and procedures. These will be ink specific and are detailed in

the corresponding Ink and Printhead User Guide.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Xaar Accessori per stampanti

Xaar

Xaar 1003 Manuale utente

Manuali Accessori per stampanti popolari di altre marche

Star Micronics

Star Micronics TSP800 Series Manuale utente

REA

REA JET HR pro 2K Manuale utente

HP Laserjet,Color Laserjet 4si Manuale utente

oliser

oliser MS 45 Manuale utente

Roland

Roland DU2-64 Istruzioni e ricette

Xerox

Xerox EFI EXP6000 Manuale utente

Canon

Canon Finisher-T1 Manuale utente

Sharp

Sharp FO-1MK Manuale utente

Labelmate

Labelmate PM-300 Manuale utente

Epson

Epson T6248 Manuale operativo

Epson

Epson OT-BZ20 Manuale utente

Canon

Canon TonerRobot EP-27 Manuale utente

Ricoh

Ricoh LCIT RT5100 Guida rapida

GBC

GBC 16 Series Manuale utente

Canon

Canon INNER 2-WAY TRAY-E1 Manuale operativo e di manutenzione

Develop

Develop SD-509 Manuale utente

Kyocera

Kyocera KM-6230 Manuale

Triumph Adler

Triumph Adler DF-710 Manuale