Xerox 4004 Manuale utente

Questo manuale è adatto per i seguenti modelli

4

Indice

Altri manuali Xerox Accessori per stampanti

Xerox

Xerox C11 - DocuPrint Color Inkjet Printer Manuale utente

Xerox

Xerox Phaser 6300 Manuale

Xerox

Xerox DOCUCOLOR 12 Manuale utente

Xerox

Xerox WorkCentre Pro 123 Manuale utente

Xerox

Xerox SquareFold Trimmer Module Manuale utente

Xerox

Xerox PHASER 6130 Manuale

Xerox

Xerox DocuPrint N24 Manuale utente

Xerox

Xerox WorkCentre 123 Manuale utente

Xerox

Xerox 5400DX - Phaser B/W Laser Printer Guida di riferimento rapido

Xerox

Xerox Phaser 6180MFP Manuale utente

Xerox

Xerox Phaser 6300/DN Manuale utente

Xerox

Xerox STACKER 8855/721P Manuale utente

Xerox

Xerox WorkCentre 6655 Manuale utente

Xerox

Xerox 5500DN - Phaser B/W Laser Printer Manuale utente

Xerox

Xerox Phaser 6180MFP Manuale utente

Xerox

Xerox Phaser 6360 Manuale

Xerox

Xerox Stacker 701P98048 Manuale utente

Xerox

Xerox 7500DX - Phaser Color LED Printer Manuale utente

Xerox

Xerox B1 Manuale utente

Xerox

Xerox 5500DN - Phaser B/W Laser Printer Manuale utente

Xerox

Xerox Phaser 8200 Manuale utente

Xerox

Xerox DocuColor 8000 Manuale utente

Xerox

Xerox 7500/DT - Phaser Color LED Printer Manuale

Xerox

Xerox Phaser 6180MFP Manuale utente

Manuali Accessori per stampanti popolari di altre marche

Star Micronics

Star Micronics TSP800 Series Manuale utente

REA

REA JET HR pro 2K Manuale utente

HP

HP Laserjet,Color Laserjet 4si Manuale utente

oliser

oliser MS 45 Manuale utente

Roland

Roland DU2-64 Istruzioni e ricette

Canon

Canon Finisher-T1 Manuale utente

Sharp

Sharp FO-1MK Manuale utente

Labelmate

Labelmate PM-300 Manuale utente

Epson

Epson T6248 Manuale operativo

Epson

Epson OT-BZ20 Manuale utente

Canon

Canon TonerRobot EP-27 Manuale utente

Ricoh

Ricoh LCIT RT5100 Guida rapida

GBC

GBC 16 Series Manuale utente

Canon

Canon INNER 2-WAY TRAY-E1 Manuale operativo e di manutenzione

Develop

Develop SD-509 Manuale utente

Kyocera

Kyocera KM-6230 Manuale

Triumph Adler

Triumph Adler DF-710 Manuale

Citizen

Citizen CBM-202PC Series Manuale utente

Step-by-Step Instructions

(PRINT this set of instructions to follow every time you refill your cartridge)

Xerox 8R7638/ 8R7659/ 4004 Cartridges

Xerox Xj4C/ Document Work Centre 450C/ 4004/ Home

Work Centre Printers/Texas Instruments Micromarc Printers

Items needed: gloves, #2 refill station, hand-drill, Flat aluminum plugs, dye-based

black ink, paper towels, review hints & tips and check list

Bottle Seal: Unscrew lid on ink bottle. Puncture silver seal with needle top

making a small hole in the center of seal. Tightly screw on dispensing tip. Rinse

dispenser tip before using dispenser tip with another color. Rinse tip with water

until the water runs clear. Pull plastic tip cover off of tip of syringe to pour ink.

1. Make a filling hole on the front of the cartridge 1/2" from the top using the thumb drill

provided.

2. Insert the Black Dye filling needle through the hole and push towards the center of the

cartridge. The cartridge contains felt. Stop inserting the syringe when the needle touches

the felt. The needle is in as far as it can go.

3. Slowly inject up to 20 ml. of ink or until ink appears at the filling hole.

4. Seal the filling hole with the aluminum tape provided.

5. Xerox_8R7638 Check the ink flow by gently pressing a dry paper towel against the

printhead. You should see a line or dot of Black ink. If not, gently press a warm, wet

paper towel against the printhead until the black is visible.

6.) When black is visible on paper towel, place cartridge back into the printer and run 1

to 2 print tests. Or print 2 pages at this test site

http://www.inkonline.net/support/blackinktest Black ink test

For best results, leave cartridge in printer for 8 hours after refilling so the ink can

saturate the entire sponge.

Note: Empty cartridges should be refilled immediately.

To Clean the Printhead

Clean the printhead only if the cartridge doesn't print or prints in streaks.

1. Follow the directions in the printer manual.

2. If that doesn't work, here's a quick and easy method to try next:

oTurn on the hot water faucet and let the water get good and hot.

oStick just the copper printhead under the hot water for 3 to 5 seconds.

oRemove the printhead and dry with a tissue.

oRe-insert in the printer and run the printhead cleaning routine.

oPrint 2 pages. You should get dilute print for a half page or so and then

good quality printing.

3. If this doesn't work, soak only the printhead in simmering water for up to 2 hours.

You may add up to 50 percent ammonia for tough clogs.