Xerox DocuPrint 92C Manuale tecnico

Xerox DocuPrint 92C IPS

Installation Planning Guide

Version 7.1

$XJXVW

2000

721P89200

Xerox Corporation

701 South Aviation Boulevard

El Segundo, CA 90245

copyrightable material and information now allowed by statutory or

judicial law or hereinafter granted, including without limitation,

material generated from the software programs which are displayed

on the screen, such as icons, screen displays, looks, etc.

Printed in the United States of America.

Publication number: 721P89200

Xerox

·,

The Document Company, the stylized X, and all Xerox

product names mentioned in this publication are trademarks of Xerox

Corporation. Products and trademarks of other companies are also

acknowledged.

Changes are periodically made to this document. Changes, technical

inaccuracies, and typographic errors will be corrected in subsequent

editions.

XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE iii

Laser safety

!Warning: Adjustments, use of controls, or performance of

procedures other than those specified herein may result in

hazardous light exposure.

The Xerox DocuPrint printers are certified to comply with the

performance standards of the U.S. Department of Health, Education,

and Welfare for Class 1 laser products. Class 1 laser products do not

emit hazardous radiation. The DocuPrint printers do not emit

hazardous radiation because the laser beam is completely enclosed

during all modes of customer operation.

The laser danger labels on the system are for Xerox service

representatives and are on or near panels or shields that must be

removed with a tool. DO NOT REMOVE LABELED PANELS OR

PANELS NEAR LABELS. ONLY XEROX SERVICE

REPRESENTATIVES HAVE ACCESS TO THESE PANELS.

Ozone information

This product produces ozone during normal operation. The amount

of ozone produced depends on copy volume. Ozone is heavier than

air. The environmental parameters specified in the Xerox installation

instructions ensure that concentration levels are within safe limits. If

you need additional information concerning ozone, call 1-800-828-

6571 to request the Xerox publication 600P83222, OZONE.

Operation safety

Your Xerox equipment and supplies have been designed and tested

to meet strict safety requirements. They have been approved by

safety agencies, and they comply with environmental standards.

Please observe the following precautions to ensure your continued

safety.

•Always connect equipment to a properly grounded electrical

outlet. If in doubt, have the outlet checked by a qualified

electrician.

!Warning: Improper connection of the equipment grounding

conductor may result in risk of electrical shock.

•Never use a ground adapter plug to connect equipment to an

electrical outlet that lacks a ground connection terminal.

•Always place equipment on a solid support surface with

adequate strength for its weight.



iv XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE

•Always use materials and supplies specifically designed for

your Xerox equipment. Use of unsuitable materials may result in

poor performance and may create a hazardous situation.

•Never move either the printer or the Printer Controller without

first contacting Xerox for approval.

•Never attempt any maintenance that is not specifically

described in this documentation.

•Never remove any covers or guards that are fastened with

screws. There are no operator-serviceable areas within these

covers.

•Never override electrical or mechanical interlocks.

•Never use supplies or cleaning materials for other than their

intended purposes. Keep all materials out of the reach of

children.

•Never operate the equipment if you notice unusual noises or

odors. Disconnect the power cord from the electrical outlet and

call service to correct the problem.

If you need any additional safety information concerning the

equipment or materials Xerox supplies, call Xerox Product Safety at

the following toll-free number in the United States:

1-800-828-6571

For customers outside the United States, contact your local Xerox

representative or operating company.

XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE v

Table of Contents

Laser safety iii

Ozone information iii

Operation safety iii

Introduction ix

About this guide ix

Contents ix

Conventions x

Notice x

1. Product overview 1-1

System overview 1-1

DocuPrint Model 92C IPS hardware features 1-3

NPS/IPS Dual Mode 1-5

Sixth Sense 1-5

Base system components 1-6

2. Controller components and options 2-1

Controller hardware 2-1

Sun Ultra 2 workstation 2-1

Sun Ultra 60 workstation 2-4

IPS user interface screen 2-9

Host Channel Unit (HCU)—channel-attached systems only 2-10

3. Printer components and options 3-1

Printer components 3-1

Printer control console 3-3

Printer options 3-4

High-capacity feeder 3-4

Dual stacker 3-5

Stitcher/stacker 3-6

Customer-changeable unit (CCU) 3-7

Bypass transport option 3-8

Interface with third-party devices 3-9

Electrical interface 3-9

4. Preparing for installation 4-1

Responsibilities 4-1

Xerox responsibilities 4-1

TABLE OF CONTENTS

vi XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE

Customer responsibilities 4-2

Installation planning checklist 4-4

Connectivity requirements 4-7

Ethernet specifications 4-7

Token Ring specifications 4-7

Channel-attached specifications 4-7

5. Controller specifications and requirements 5-1

Power requirements 5-1

Outlet configurations 5-2

Environmental specifications 5-3

Space requirements 5-3

Printer controller placement 5-3

Controller hardware specifications and requirements summary 5-8

6. Printer specifications and requirements 6-1

Power requirements 6-1

Outlet configurations 6-2

Printer outlet voltages—60 Hz 6-2

Printer outlet voltages—50 Hz 6-3

Environmental specifications 6-4

Space requirements 6-5

Printer placement 6-5

CCU changeout cart 6-10

Space planning guidelines 6-11

Clearance space requirements 6-11

Shared space 6-11

Floor leveling 6-15

Delivery access requirements 6-15

Printer hardware specifications and requirements summary 6-18

Space planning templates 6-19

7. System connections 7-1

Cable lengths 7-1

Cable locations 7-2

Channel attachments 7-2

8. Installation 8-1

Installation process 8-1

Your responsibilities 8-2

Defining the IPS printer to the host 8-3

Software licensing 8-3

Ongoing maintenance 8-4

TABLE OF CONTENTS

XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE vii

Routine maintenance 8-4

Meter reading and reporting 8-4

A. Supplies A-1

Paper and other throughput stocks A-1

Selecting paper A-1

Paper care A-3

Other supplies A-6

Dry ink A-6

Fuser lubricant A-6

Developer A-6

Stitcher wire A-7

Diskettes A-7

Tapes A-7

Fonts A-8

Consumable supplies tables A-9

Paper and special stocks tables A-9

Complete supplies list—Model 92C printer A-12

Ordering supplies A-14

B. Xerox support services B-1

Xerox Customer Service Support Center B-1

Xerox Printing Systems Customer Support Center B-2

Xerox Customer Documentation Catalog B-3

Xerox Documentation and Software Services (XDSS) B-3

Operator training B-3

Xerox Customer Education B-4

Xerox Font Center B-4

C. Related publications C-1

D. Defining the channel-attached printer to the host D-1

MVS parameters D-1

OS/2 procedures D-4

AIX procedures D-5

VM sample definitions D-6

VSE sample definitions D-6

E. Defining the printer to the host: TCP/IP attachment E-1

MVS or OS/390 parameters E-1

Software prerequisites –MVS E-1

Network configurations –MVS E-1

Configuration steps –MVS E-2

TABLE OF CONTENTS

viii XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE

1. Configure the IPS printer for TCP/IP at the GUI E-2

2. Configure the MVS CCU for the MVS host to MVS E-2

3. Configure the PSF printer in JES2 or JES3 E-2

4. Configure the printer in PSF/MVS E-7

5. Configure TCP/IP for MVS for the printer E-11

6. Test the printer to ensure it prints from the MVS host E-14

Correcting for printer performance issues –MVS E-16

References E-17

AS/400 parameters E-18

Software prerequisites –AS/400 E-18

Network configurations –AS/400 E-18

Configuration steps –AS/400 E-19

1. Configure the IPS printer for TCP/IP at the GUI E-19

2. Create the PSF/400 configuration E-19

3. Create the printer device description –AS/400 E-20

4. Test the printer connection –AS/400 E-22

Correcting for printer performance issues –AS/400 E-24

References –AS/400 E-24

AIX parameters E-25

Software prerequisites –AIX E-25

Network configurations –AIX E-26

Configuration steps—AIX E-26

References E-27

OS/2 parameters E-28

Software prerequisites –OS/2 E-28

Network configurations –OS/2 E-28

Configuration steps –OS/2 E-29

1. Configure the printer for TCP/IP in OS/2 E-29

2. Provide TCP/IP routing information if necessary E-29

3. Define the printer to PSF/2 E-30

4. Define a PSF/2 print queue for the printer (optional) E-31

5. Test the printer connection in OS/2 E-32

Correcting for printer performance issues –OS/2 E-34

References –OS/2 E-35

Glossary GLOSSARY-1

Index INDEX-1

XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE ix

Introduction

This guide helps you prepare for delivery and installation of your new

Xerox DocuPrint printing system.

About this guide

This guide is intended for the person responsible for coordinating the

installation of the Xerox DocuPrint 92C Highlight Color Laser Printing

System at your site. It lists the tasks you must complete before

installation can begin, as well as your responsibilities during the

installation.

Before using this guide, become familiar with its contents and

conventions.

Contents

This guide contains the following:

•Chapter 1, "Product overview," provides an overview of the

Xerox DocuPrint 92C Highlight Color Laser Printing System.

•Chapter 2, "Controller components and options," describes

system controller hardware, software, and options of your laser

printing system (LPS).

•Chapter 3, "Printer components and options," describes printer

components, configurations, and options.

•Chapter 4, "Preparing for installation," provides a checklist of

tasks that must be accomplished before the installation. It also

explains connectivity requirements for transporting documents

from the host or client to the DocuPrint printing system.

•Chapter 5, "Controller specifications and requirements,"

describes power, environmental, and space requirements for

the system controller.

•Chapter 6, "Printer specifications and requirements," describes

power, environmental, and space requirements for the printer.

Space planning guidelines and diagrams are provided to help

you set up the work area.

•Chapter 7, "System connections," provides cable requirements

for your LPS.

•Chapter 8, "Installation," describes the activities that occur

during installation. It also describes ongoing maintenance

activities.

•Appendix A, "Supplies," describes how to select, store, and use

supplies for the DocuPrint printing system. It also provides a list

of consumable supplies you can order.

INTRODUCTION

xXEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE

•Appendix B, "Xerox support services," explains how to utilize

available Xerox support services.

•Appendix C, "Related publications," lists other Xerox

documents that are part of this publication set.

•Appendix D, "Defining the channel-attached printer to the host,"

provides explanations and sample printer parameters for

defining your channel-attached printer to your host.

•Appendix E, "Defining the printer to the host: TCP/IP

attachment," provides instructions, prerequisites, and sample

printer parameters for defining your TCP/IP-attached printer to

your host.

A glossary and index are provided at the back of the guide.

Conventions

This guide uses the following conventions:

•Italics—Document and library names are shown in italics (for

example, the Xerox DocuPrint IPS Series Messages Guide).

•Capitalization of graphical user interface (GUI) window titles

matches the titles as they appear on the screen. In cases where

a window does not have a title, it is referenced using all lower

case. For example:

—At the graphical user interface, use the Output

Configuration window to group the trays.

—The main window displays the current system status.

Note: Notes are hints that help you perform a task or understand

the text.

Caution: Cautions alert you to an action that could damage

hardware or software.

!Warning: Warnings alert you to conditions that may affect the

safety of people.

Notice

This publication may contain descriptions of concepts and features

not currently available for your Xerox printing system. Consult your

Xerox sales representative or your operating system software

program description for additional information.



Altri manuali per DocuPrint 92C

Indice

Altri manuali Xerox Stampante

Xerox

Xerox PHASER 3435 Manuale utente

Xerox

Xerox DocuPrint 92C Manuale utente

Xerox

Xerox DocuPrint P8EX Manuale utente

Xerox

Xerox Phaser 6100 Manuale utente

Xerox

Xerox DocuPrint C1618 Manuale utente

Xerox

Xerox Phaser 2135 Manuale utente

Xerox

Xerox DocuPrint N4525 Manuale utente

Xerox

Xerox PHASER 6250 Istruzioni di installazione e manutenzione

Xerox

Xerox Nuvera 288 Manuale utente

Xerox

Xerox 7400DN - Phaser Color LED Printer Manuale utente

Xerox

Xerox DocuColor 5750 Manuale di istruzioni

Xerox

Xerox Phaser 8560 Manuale operativo

Xerox

Xerox 6125N - Phaser Color Laser Printer Manuale utente

Xerox

Xerox Phaser 3320 Manuale utente

Xerox

Xerox C8 - DocuPrint Color Inkjet Printer Manuale operativo e di manutenzione

Xerox

Xerox DocuColor 8000 Istruzioni per l'uso e l'installazione

Xerox

Xerox 7700DX - Phaser Color Laser Printer Manuale utente

Xerox

Xerox VersaLink C400 Manuale utente

Xerox

Xerox Phaser 4600DN Manuale operativo

Xerox

Xerox Phaser 7400 Manuale utente

Xerox

Xerox Document Centre 240 ST Istruzioni per l’uso

Xerox

Xerox DocuPrint N17 Manuale utente

Xerox

Xerox WorkCentre Pro 423 Manuale utente

Xerox

Xerox Phaser 6510 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente