Xerox PHASER 340 Manuale utente
Using the printer withWindows 95
For better performance and added features when printing from Windows 95,
it is recommended that you use the Windows 95 printer driver and not the
Windows 3.1 printer driver. Using the Windows 3.1 printer driver in
Windows 95 may cause printing problems.
To print to a Phaser 340 printer from Windows 95, do the following steps:
■
Remove Windows 3.1 printer drivers, if you have any installed
under Windows 95. For better printing performance, use the
Windows 95 printer driver.
■
Add the Phaser 340 printer to the
Printers
window from software
available on the Phaser 340 CD-ROM or floppy diskettes.
Click on the following topics for more information:
■
Removing a Windows 3.1 driver in Windows 95
■
Adding the Phaser 340 printer to the Windows 95 driver
■
Using printer options in the Windows 95 driver
Removing aWindows 3.1 driver inWindows 95
If you installed a Tektronix Windows 3.1 printer driver in Windows 3.1, then
upgraded from Windows 3.1 to Windows 95, the driver will appear in
Windows 95. You should remove any Windows 3.1 drivers and install the
Windows 95 driver and your printer.
Removing printers and older drivers
1.
Start Windows 95.
2.
Click the
Start
icon in the taskbar on your screen; a menu appears.
3.
Move the cursor over
Settings
; another menu appears.
4.
In the menu, click
Printers
; the
Printers
window appears.
5.
Look for any Tektronix Phaser printers with
(TekColor)
as part of
the printer’s name.
Note
If you renamed your printer and
(TekColor)
is not part of the
printer’s name, but you think a Tektronix Phaser printer icon is
an older printer file, move the cursor over the printer icon, and
click the right mouse button. In the menu that appears, click
Properties
; the
Properties
dialog box appears. If
General
and
Details
are the only tabs available, then this is an older printer
file. Continue with the steps below to remove the printer.
6.
Move the cursor over a printer icon, and click the
right
mouse
button; a menu appears.
7.
In the menu, click
Delete
. When prompted, click
Yes
to delete the
printer files. If you are prompted to delete other software files
associated with the printer, click
Yes
.
8.
The printer’s icon should now be removed from the
Printers
window.
9.
Repeat Steps 6 and 7 for all Tektronix printers you have installed.
10.
You can use the instructions in Adding the Phaser 340 printer to
the Windows 95 driver to reinstall any Tektronix printers for
Windows 95. PPD files for Phaser printers are available on the
Phaser 340 CD-ROM and diskettes shipped with your printer.
Adding the Phaser 340 printer to theWindows 95 driver
1.
Start Windows 95.
2.
Insert the Phaser 340 CD-ROM into your computer’s CD-ROM
drive, or insert the Printer Software for Windows diskette into
your computer’s disk drive.
3.
Click the
Start
icon in the taskbar on your screen. In the menu
that appears, click
Settings
.
4.
In the menu that appears, click
Printers
; the
Printers
windows appears.
5.
In the
Printers
window, double-click
Add Printer
; the
Add
Printer Wizard
appears. Click
Next
.
6.
Select your printer’s connection:
■
Select
Local Printer
if your printer is connected directly to your
computer, then click
Next
.
■
Select
Network Printer
if you are accessing your printer through a
network. Click
Browse
to search the network and select a printer
queue. Then click
Next
.
7.
In the window listing
Manufacturers/Printers
, click
Have Disk
.
8.
In the
Install From Disk
dialog box, type in the drive for the
Phaser 340 CD-ROM or for the Printer Software for Windows
diskette, and click
OK
.
9.
A list of Tektronix printers appears. Select your printer in the list,
then click
Next
.
■
Select
Tektronix Phaser 340
if you have the standard version of the
printer with 17 fonts.
■
Select
Tektronix Phaser 340 600 dpi
if you have the printer’s
extended features option with 69 fonts.
Note
If you are not sure of the number of fonts installed in your
printer, the printer’s startup page lists the number of fonts
installed.
10.
Select the port your printer is connected to, then click
Next
.
11.
It is recommended that you use the default printer name shown
under
Printer name
. Click
Yes
if you want this printer to be the
default printer. Then click
Next
.
12.
At the prompt,
Would you like to print a test page?
click
Yes
to verify the printer’s connection, or click
NO
. Then
click
Finish
.
A status bar appears while files are copied to your computer.
13.
If prompted, select the path for the PostScript driver file
ICONLIB.DLL
; this should be in your
WINDOWS/SYSTEM
directory.
If the file isn’t installed on your hard disk, do one of the following:
■
Insert the Microsoft CD-ROM for Windows 95, select the
WIN95
directory, and click
OK
.
■
Insert the requested Microsoft floppy diskette for Windows 95,
select the drive, and click
OK
.
The software you need is installed.
14.
If your printer is set up correctly, and you clicked
Yes
in Step 12, a
test page prints showing the Windows 95 logo and information on
your printer.
Your Phaser 340 printer is added to the
Printers
window.
Using printer options in the Windows 95 driver
In the
Printers
window, click the
Phaser 340
printer icon with the right
mouse button, then select
Properties
from the menu. Click the following
tabs to see printing options; refer to your Windows 95 documentation for
information on other tabs and options.
Click on the following topics for more information:
■
Details
■
Paper
■
Graphics
■
Device Options
■
PostScript
Details
Click the
Details
tab to see the following options:
■
Set the
Timeout settings
.
■
Not Selected:
Type a value of
0
, or between
15
and
999
, in this text
box to change the number of seconds Windows waits before
notifying you that a printer is off-line. The default is
15
seconds.
■
Transmission Retry:
On large or multiple-page documents you
may see an Alert message that the printer is no longer accepting
data before the job is completely sent to the printer. When using a
shared printer, you should set this option to a larger value, such as
850 to avoid these unnecessary timeouts. Type a value between 45
and 850 in this text box; the default setting is 45 seconds.
Paper
Click the Paper tab to see the following options:
■Select a media size in the Paper size field.
■Select a media tray or media type in the Paper source field.
■Letter (U.S.) ■A4 (metric)
■AutoSelect Tray
■Upper ■Lower
■Paper ■Transparency
■Manual Paper ■Manual Transparency
Altri manuali per PHASER 340
4
Indice
Altri manuali Xerox Stampante
Xerox
Xerox Wide Format IJP 2000 Manuale utente
Xerox
Xerox Phaser 8560 Manuale operativo
Xerox
Xerox DocuPrint P8EX Manuale utente
Xerox
Xerox Phaser 3115 Manuale utente
Xerox
Xerox 8860MFP - Phaser Color Solid Ink Manuale utente
Xerox
Xerox Phaser 4 400 Manuale utente
Xerox
Xerox Phaser 790 Manuale dell'operatore
Xerox
Xerox WorkCentre 4260 Series Manuale utente
Xerox
Xerox P H A S E R 8 2 Manuale utente
Xerox
Xerox Nuvera 100 Istruzioni per il montaggio
Xerox
Xerox Phaser 5500 series Manuale utente
Xerox
Xerox Nuvera 100 Manuale utente
Xerox
Xerox DocuPrint C3055 DX Manuale utente
Xerox
Xerox WorkCentre 6505 Manuale utente
Xerox
Xerox Phaser 5500 series Manuale
Xerox
Xerox DocuPrint 211 Manuale utente
Xerox
Xerox Phaser 4500 Manuale
Xerox
Xerox Phaser 2135 Manuale utente
Xerox
Xerox DocuPrint C2535 A Manuale utente
Xerox
Xerox PHASER 6250 Manuale utente
