XPOtool 62912 Manuale utente
User’s Manual
Hydraulic Pipe Bender
62912
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
https://www.XPOtool.com Item 62912 Page 2
The Tool Experts
09 2022-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler – Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
https://www.XPOtool.com Item 62912 Page 3
The Tool Experts
09 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•Keep your working area tidy. Untidy work areas invite accidents.
•Consider the conditions of your working area. Do not work in damp, wet, or badly lit areas. Do
not expose the device to rain. Always keep your working area well illuminated.
•Keep children away. Children must not be near the work area. Do not allow children to operate
the device.
•Store non-used devices. If not using the device, keep it in a dry place. If possible, keep it out of
children’s reach.
•Never apply force on tools or machines. They will operate more reliably and with more safety if
used for applications that they have been designed for.
•Use the appropriate tool. Do not use small tools or accessories for work that would need to be
done with a large industrial machine. Never use tools or devices for work that they have not
been designed for.
•Wear appropriate clothing. Do not wear loose clothing or jewellery that could get caught in mov-
ing parts. It is advisable to wear protective work gloves and anti-slip shoes. Tie long hair together
to avoid it getting caught by the machine.
•Wear a suitable protective equipment (protective goggles, protective gloves, etc.).
•Do not stoop down too far. Ensure a safe stand and keep your balance.
•Always maintain tools with care. Keep tools proper to ensure their functioning reliably and safely.
Obey the instructions on lubricating and replacing accessory parts. Always keep the handles
clean, dry, and free from oil and grease.
•Stay alert. Concentrate on what you are doing and work with common sense. Do not use the
device when being tired or under the influence of alcohol, drugs, or medicine. Read the warnings
that are on and in the packaging of your medicine to know if your perception or reflexes are
impaired by the medicine that you take. In case you are not sure, you should not operate tools
or devices.
•Before operating any tool or device, check it for missing or damaged components. Any part that
could be damaged must be checked properly for its operability. Check the alignment of moving
parts and ensure that they are not blocked or otherwise damaged. Ensure that no part is dam-
aged or otherwise limited in operability. Any damage should be repaired or replaced by a spe-
cialist.
•When repairing the device, only use identical spare parts. Only use accessories designed for
use with this device.
•Always stay behind the device to avoid accidents.
https://www.XPOtool.com Item 62912 Page 4
The Tool Experts
09 2022-1
Main components and their name
№
Name
1
Piston pump
2
Relief valve
3
Valve screw
4
Fixing block
5
Handle
6
Upper board
7
Return spring
8
Bending insert
9
Lower board
10
Guide sleeve
11
Handle holder
12
Cylinder
Operation
1. First, untighten the oil clutch screw to allow the air to circulate freely inside the tank. It is advis-
able to apply lubricating oil onto the surface of the form and pipe.
2. Depending on the size of the pipe that shall be bent, select the appropriate bending form, adjust
the position of the support wheel, and attach the pipe onto the form. (The pipe diameter should
approximately correspond to the width of the groove of the form. The thickness of the wall of
the pipe should not be too thin, as the bending would be warped and the form damaged.)
3. Then tighten the relief valve on the right-hand side of the machine and press the handle to bend
the pipe.
4. After the bending is finished, untighten the relief valve. The cylinder is retracted automatically.
Open the upper panel to separate the pipe from the form and to remove it.
Cleaning and maintenance
•Regularly clean the device.
•When filling the oil tank, the oil must be filtered. If possible, use a special filter.
•The filtering device should be cleaned regularly.
• The hydraulic oil used for this device is of type HLP 15.
Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a
written permission of WilTec Wildanger Technik GmbH.
Indice
Altri manuali XPOtool Attrezzature per l'edilizia
