XtendLan DPK-W100 Manuale utente

DPK-W100

Wireless colour video doorphone

User manual

Contents

Features……………………………………………………………………1

Components checklist……………………………………………………1

Products

description………………………………………………………2

Cradle………………………………………………………………………3

Charger fixing

procedure…………………………………………………4

Button

description…………………………………………………………5

ID NO.

display……………………………………………………………5

Coding………………………………………………………………………5

Receive

code………………………………………………………………6

Code

clearing………………………………………………………………7

Setting of ring

tone………………………………………………………7

rightness adjustment

…………………………………………………

Surveillance…………………………………………………………………8

Basic

operation ……………………………………………………………9

Night-vision operation…………………………………………………11

Unlocking

time

setting…………………………………………………11

Installation………………………………………………………………12

Lock

connection…………………………………………………………13

Technical

specifications…

…

Trouble

shooting……………………………………………………15

Propagation

of radio waves…

…

Battery

specifications…

…

Notes……………………………………………………………………17

Features

●Wireless colour video doorphone

●Mobile handset with 2.4 TFT-LCD screen

●Identify and screen callers

●Unlock doors remotely for visitors

●Range in free field 300 meters

●12 selectable ringtones

●Handset to handset communication (Paging)

●Infra red camera in outside call station to see callers at night

●Expand to a 2-way system by adding a call station & handset

●Rechargeable battery via mini USB interface

●Standby status 72 hours

●Easy to install

●Built-in surveillance mode function

Components checklist

Package contents:

one outdoor camera/call station, one handset monitor (include Li-ion

battery), one power adaptor for call station (DC5V, 1A), one charger

for handset monitor (DC4.5V, 0.8A), cradle and some screws for

fixing the call station on the wall.

Components description:

Handset monitor Charger Call station Power adaptor Cradle

Products description

Speaker 2.4G antenna

ON/OFF

Status

indicator

2.4 inch LCD

Unlock

Monitor

Brightness+

Brightness-

Code clearing

Reset

Answer

Microphone

Camera

Speaker

Status indicator

Call

Cradle

1.Fixed on the desk 2.Fixed on the wall

Charger fixing procedure

(3)

(5)

(4)

(6)

Button description

“ON/OFF”button: It is used to power on/power off of wireless

handset monitor.

“ ”: Is used to:a) answer the calls when visitors press the call

button in outdoor call station; b) as the confirmation button when

performing the ringing tone selection; c) as the coding button when

carrying out coding between the components.

“ ”: In standby status, it is used to enter the menus of ringing tone

selections; in talk status, it is used to increase brightness.

“ ”: In talk status, it is used for reducing brightness.

“ ”: Is used to switch on the camera in outdoor call station in order

to monitor outside in standby status.

“ ”: It is used to operate an electric lock release when the monitor

is in the “talk” status.

“ ”:Is used to clear the previous code .After this operation ,you

should carry-out the coding procedure between or among the call

stations and handsets again.

“ ”：Make it return to the default status .After this operation ,then

it will enter the OFF status.

ID NO. display

Press the “ON/OFF” button when the handset monitor is in OFF

status, until the 2.4 inch TFT-LCD displays “Welcome” and sounds

two “Di Di” tones, then release the button. It means that the handset

monitor is entering into the ON status.

Press the “ON/OFF” button when the handset monitor is in ON status,

then the 2.4 inch TFT-LCD will show “Goodbye”and create two “Di Di”

tones, then release the button. This indicates that the handset

monitor is entering into OFF status.

When the outdoor camera is powered, a single “Di” tone indicates

that call station 1 is being viewed. If a dual “Di Di” tone is sounded

this confirms that the call station 2 is being viewed.

Coding

1).Press the “”and “”buttons at the same time when the

handset monitor is in power-on status, until the screen shows the

letters “Configure code”, then release the buttons and it will enter

the coding status.

2).At this time, press the call button in outdoor camera when it is in

standby status until the red indicator remains lit and creates two

sounds “Di Di ”, then release the button and it will enter the coding

status.

3)If the handset monitor shows the letters “successed” within 8s, the

coding is successful and the call station and handset monitor have

successfully paired; at this time, the outdoor call station will create 3

sounds “Di Di Di”. If the handset monitor shows the letters "failed"

within 8S, then it means that the coding is failed and the outdoor

station will have no response.

Note

After successful coding, then the outdoor camera and handset

monitor are the 1st outdoor camera and 1st handset monitor

respectively; if coding is failed, you should do the coding again.

Receive code

(only required when adding one more call station or

one more handset monitor.)

Adding one more handset monitor :

1).Press the “”and “”buttons at the same time, when the 1st

handset monitor is in ON status until the screen shows “transmit

code”, then release the buttons and enter the “transmit code” status.

2).On the additional handset(2nd) after “transmit code” is displayed

on the 1st handset, press the “ ” and “ ” buttons at the same time

on the 2nd handset when it is in ON status until the screen shows

“receive code”, then release the buttons and enter the “receive code”

status, then press the “”button at this time in 2nd handset

monitor. If it shows “successed” on the handset, it means that the

coding has been successful.

Adding one more outdoor call station :

1).Press the “ ”and “ ”buttons when the handset is in the ON

status until the screen shows “transmit code”, then release the

buttons and enter the “transmit code”status.

2).Then press and hold the call button in outdoor call station until

you hear the two “Di Di” tones. Then release the call button in outdoor

call station (Do not release until you hear the two Di Di tones ). Then

press the “ ”button in the handset at this time. If it shows

“successed” on the handset, the coding has been successful.

Adding one more outdoor call station and one more

handset monitor:

1).Press the “ ”and “ ”button when the 1st handset monitor is in

ON status until the screen shows “transmit code”, then release the

buttons and enter the “transmit code” status .

2.Then press the “ ”and “ ”buttons at the same time when the

2nd handset monitor is in ON status until the screen shows “receive

code”, then release the buttons and enter the “receive code” status.

Press the “ ”button at this time on 2nd handset monitor. If it shows

“successed” on the handset, then it means that the coding is

successful.

3).On the 2nd handset, press and hold the “ ” and “ ” buttons

when the 2nd handset monitor is in ON status until the screen shows

“transmit code”, then release the buttons and enter the “transmit

code” status.

4).During this time, press the call button in 2nd outdoor call station

until you hear two DiDi tones. Then release the call button in the

outdoor call station(Do not release the button until you hear the two

DiDi tones). If it shows “successed” in the handset, it means that the

coding has been successful.

5).If all the coding is successful, press the “ ”button in the 1st

handset monitor to return to the standby status .

Code clearing

Handset monitor: Keep pressing the “ ”and “ ”buttons when

the handset monitor is in OFF status. At the same time, then press

the ON/OFF button in the handset monitor together until the screen

displays “clear code ” and creates one “Di” sound (still keep pressing

the “ ” and “ ”buttons when you press the ON/OFF button). This

means that code clearing is successful. It will be in OFF status after

releasing the buttons.

Outdoor call station:

Press the code-clear button (the code-clear button is in the back of

outdoor call station, for details, please refer to the lock connection

section. Its icon is . ) and it creates one “Di” sound. This means

that code clearing is successful.

Note: Be careful when doing this, as it will cause a malfunction. You

will then need to carry out the coding procedure of outdoor call

station and handset again. See above for CODING and RECEIVE

CODE sections.

Setting of ring tone

Press the “ ” (ring tone selection button) when the handset

monitor is in standby status, until a ring tone sounds, the

monitor is now in ring tone selection mode. At this time, press

the “ ”button successively to choose another tone(A total 12

ring tones are available for selection ). After choosing your

favorite tone, press the “ ” button to confirm, or wait until the

playing tone is ended, then it will auto-exit.

Adjusting brightness

There are 6 levels for brightness adjustment.

Press the “ ”button when the handset monitor is in talk status or

surveillance function(For details, please kindly refer to the BASIC

OPERATION and SURVEILLANCE), then the brightness level will

become higher. At this time, it will show “Val 0i” on the handset

monitor (“ i ”is to indicate the brightness level). When the brightness

is adjusted up to maximum level, if you press this button again, then

it will be invalid.

Press the “ ”button when the handset monitor is in talk status or

surveillance status, then the brightness level will become lower. At

this time, it will show “Val 0i” on the handset monitor (“ i ” is to

indicate the brightness level). When the brightness is adjusted to

minimum level, if you press this button again, then it will be invalid.

Surveillance

One to one intercom:

1).Press the “ ”button when the handset monitor is in standby

Indice

Altri manuali XtendLan Sistema di interfono

XtendLan

XtendLan DPP-D202 Manuale utente

XtendLan

XtendLan DPC-D218ID Manuale utente

XtendLan

XtendLan DPA-D2-GSM Manuale utente

XtendLan

XtendLan DPC-536 Manuale del proprietario

XtendLan

XtendLan DPC-D247 Manuale utente

XtendLan

XtendLan GSM DPC-G100 Manuale utente

XtendLan

XtendLan DPC-D250 series Manuale utente

XtendLan

XtendLan DT607 Series Manuale utente

XtendLan

XtendLan DPC-511 Manuale utente

XtendLan

XtendLan DPC-518ID Manuale utente

XtendLan

XtendLan DPM-535 Manuale utente

XtendLan

XtendLan DPG-IP-G21 Manuale utente

XtendLan

XtendLan DPC-D244-R Manuale utente

XtendLan

XtendLan DPC-D248-K Manuale utente

XtendLan

XtendLan DPC-IP101ID Manuale utente

XtendLan

XtendLan CAT-5 wired Guida rapida

XtendLan

XtendLan DPM-IP700 Manuale utente

XtendLan

XtendLan DPM-451 Manuale utente

XtendLan

XtendLan DPC-D241-1 Manuale utente

XtendLan

XtendLan DPC-D246A Manuale utente

XtendLan

XtendLan DPC-441 Manuale utente

XtendLan

XtendLan DPC-D244-K Manuale utente

XtendLan

XtendLan DPM-571 Manuale utente

XtendLan

XtendLan PM-IP-701TMD Manuale utente

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente