XtraVac CM1440B Guida all'applicazione
CM1440B
XtraVac • CM1440B
Vacuum Chamber Machine
Operation & Parts Manual
A Division of the Inauen Group ˜ Kansas City, MO USA
Tel. 800-728-2999 ˜ Fax 816-472-1999
Safe Operation Practices
General Operation
．Read, understand, and follow all instructions in the manual and on the machine before
starting. Keep this manual in a safe place for further and regular reference and for ordering
replacement parts.
．Only allow people who familiar with the instructions to operate the machine. Be sure to
know controls and how to stop the machine quickly.
．Do not put your hands near moving parts.
．Remove all obstacles, which may interfere with the machine functions.
．Clear the work area such as electrical wires, gloves, knives etc.
．Be sure that everyone else is clear of your work area before operating the machine.
．Do not sit nor stand on the machine.
．Be sure turn off the machine after your work is finished. Never leave a running machine
unattended.
．Always disconnect and wait until the machine has cooled before doing any maintenance.
．Do not wear loose fitting clothes or jewelry as they may get caught in moving parts of the
machine.
．Please wear security shoes, to avoid injury caused by moving the machine or objects falling
from the machine.
．Never exceed the time limit to seal, which is suggested by the manufacturer. This is to avoid
any damage that may be caused to the sealing bars and to reduce the risk of fire in the
machine.
．Never touch the sealing bars after they have been used, this will avoid corporal burns. Wait a
few minutes to let the machine cool down before touching.
．Make sure the sealing bars are well installed in their “Guide Blocks” before starting package.
．Never incline the machine more than 30 degrees, it may tip over and hurt someone seriously.
Your responsibility
This machine should only be operated by personal who can read, understand and respect
warnings and instruction regarding this machine in the owners manual.
XtraVac CM1440B J-V027 Operation & Parts Manual
XtraVac Packaging Machines
CM1440B J-V027 Belted Chamber Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
1
Content
Chapter：1 Safety precautions
1.1 Precautions of transportation, installation and packing
1.2 Precautions before and after machine starting
Chapter 2：Overall description of the machine
2.1 Features of the machine
2.2 Function of the machine
2.3 Product proper for this machine
2.4 Usage life of the machine
2.5 Marking location and content description
2.6 Specification of the machine
Chapter 3：Function description of the pushbuttons on the
panel
Chapter 4：Instructions of operation, maintenance and
troubleshooting
4.1 Operation sequence
4.2 Maintenance
4.3 Troubleshooting
4.4 Reinstall hooker of belt
Chapter 5：Related environment and accessories of the
machine
5.1 Accessory
5.2 Airborne noise level
5.3 Storage condition
5.4 Operation environment
V1.02
XtraVac CM1440B J-V027 Operation & Parts Manual
XtraVac Packaging Machines
CM1440B J-V027 Belted Chamber Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
2
Chapter 1：Safety precautions
1.1 Precautions of transportation, installation and packing
1.1.1 Preparations before installation
1.1.1.1 Power requirement:
Voltage: Look at the nameplate
Current: Look at the nameplate
Frequency: 50/60Hz
Phase: 3Ø
1.1.1.2 Installation requirement
1.1.1.2.1 Prevent to install the machine in the environment full of dust and corrosive
atmosphere with acid and alkali.
1.1.1.2.2 Prevent to install the machine in the environment with abnormal vibration.
1.1.1.2.3 Prevent to install the machine under direct sunlight or near vapor. Such will
affect its vacuum degree.
1.1.1.2.4 The ground circuit should be independently or parallel.
1.1.1.2.5 Don’t install the machine in the potentially explosive atmosphere.
1.1.1.2.6 Installation space includes the requirement of the operator and machine
Length × Width × Height = 2.5m×2.5m×2.5m
XtraVac CM1440B J-V027 Operation & Parts Manual
XtraVac Packaging Machines
CM1440B J-V027 Belted Chamber Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
3
XtraVac CM1440B J-V027 Operation & Parts Manual
XtraVac Packaging Machines
CM1440B J-V027 Belted Chamber Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
4
1.1.2 Preparations during transportation
1.1.2.1 The weight of this machine is 500-600kg, so that the loading capacity of any
handling device is recommended to be more than 1000kg. If you are not sure of the
safe loading capacity, please contact the manufacturer of such handling device. If
the situation is clearly understood, don’t try to handle the machine by yourselves.
1.1.2.2 Either by lifting or by handling, it’s necessary to check the balance carefully in
advance.
1.1.2.3 The work of lifting or by handling should be carried out by means of qualified
operator.
1.1.2.4 During machine handling, any people or car is not allowed to approach the
surrounding of the machine.
1.1.2.5 During handling, notice that whether there is any person or barrier on the handling
path and the surrounding of the machine. If it is, clear it before machine handling.
1.1.3 Precautions during packing
1.1.3.1 Packing material: Wood case.
1.1.3.2 Packing sequence: Put the wood base on the ground. Then, put the machine on it.
Next, pack the machine with plastic film and put vibration-absorbing board around
the machine. Then, assemble the wood case. At last, Use nails to fix the wood base
and case.
1.2 Precautions before and after machine starting
1.2.1 Precautions before machine starting
1.2.1.1 Before using this machine, read and realize the contents of this manual in detail.
1.2.1.2 Check that whether the voltage is correct.
1.2.1.3 Confirm that whether the electric power and its rating is sufficient.
XtraVac CM1440B J-V027 Operation & Parts Manual
XtraVac Packaging Machines
CM1440B J-V027 Belted Chamber Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
5
1.2.1.4 Check that whether all the safety related devices are normal, and notice that whether
anyone within the danger zone.
1.2.1.5 Visual check that whether all mechanical and electric parts are normal, and also
notice that whether the surrounding environment is clean.
1.2.1.6 Sequences of power on:
1.2.1.6.1 Turn on the factory power.
1.2.1.6.2 Turn on the main switch of the machine.
1.2.2 Precautions after machine starting
1.2.2.1 Confirm that whether the display is correct.
1.2.2.2 Confirm that whether the sound coming from pump running is normal (refer to
clause 3.12.2).
1.2.2.3 Confirm that whether the rotation direction of the conveyor is consistent with the
marking on the chain guard. If the direction is wrong, change the wires.
1.2.2.4 Wear safety shoes, protection clothes and mask to ensure safety and hygiene of the
operator.
XtraVac CM1440B J-V027 Operation & Parts Manual
XtraVac Packaging Machines
CM1440B J-V027 Belted Chamber Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
6
Chapter 2：Overall description of the machine
2.1 Features of the machine:
2.1.1 The machine main body is made of stainless steel with features of pretty appearance,
well endurance and easy cleaning.
2.1.2 The machine adopts high vacuum pump specific for food packaging and micro-
computerized auto control system with 10 sets of friendly memory function and
independent display.
2.1.3 If product with lots of juice is packed, it is possible to adjust the table angle preventing
juice leakage. Such design is proper for a lot of products.
2.1.4 The machine is allowed to connect auto loading and unloading device for automatic
production.
2.1.5 Conveyor is used for continuous production. Such can increase the total production,
save lots man power and working time.
2.1.6 Stainless steel chain is adopted to ensure hygiene and quality requirement.
2.1.7 The machine adopts high vacuum pump (imported from Europe) micro-computerized
auto control system with water-resistance design.
2.1.8 It is adequate for any processing factory.
2.2 Function of the machine
2.2.1 Keep food fresh, original taste, anti-septic
2.2.2 Extend the preservation limit.
2.2.3 Prevent humidity and stain on electronic and ironmongery components.
2.2.4 It is proper for contents of solid, powder or liquid.
2.3 Product proper for this machine:
XtraVac CM1440B J-V027 Operation & Parts Manual
XtraVac Packaging Machines
CM1440B J-V027 Belted Chamber Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
7
2.3.1 Meat, seafood, agriculture products, dehydrated food, herbs, vegetarian food, pickles
and spices.
2.3.2 Electronic components, ironmongery components, medical equipment, clothes, powder
and flavoring
2.4 Usage life of the machine:
2.4.1 Except the consumable parts, the machine’s intended usage life is 10 years.
2.4.2 Provide one year free maintenance and service after shipping. The date is calculated
from the end of installation.
2.4.3 We accept 18 month warranty at most, so that machine’s installation should be finished
in 6 month. After the warranty, we will charge for further maintenance service.
2.4.4 Free maintenance service doesn’t include consumable parts and vacuum oil.
2.4.5 If there is any abnormal or unstable situation during the warranty period, please inform
us or our agent. We will improve it immediately.
2.5 Marking location and content description
2.5.1 Nameplate: stuck on the back of control cabinet.
XtraVac CM1440B J-V027 Operation & Parts Manual
XtraVac Packaging Machines
CM1440B J-V027 Belted Chamber Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
8
2.5.2 Electric shock warning sign: stuck on the cabinet door
2.5.3 Warning sign: Stuck on the chain guard, upper lid.
2.5.4 Conveyor direction label: Stuck on the chain guard
XtraVac CM1440B J-V027 Operation & Parts Manual
XtraVac Packaging Machines
CM1440B J-V027 Belted Chamber Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
Indice
Altri manuali XtraVac Attrezzature industriali
