Xvive U3 Manuale utente
Manual
WIRELESS FOR
DYNAMIC MICROPHONES
AND PA/DJ SYSTEMS
MICROPHONE WIRELESS SYSTEM
DUAL WIRELESS SYSTEM FOR AUDIO
U3D
U3
CERTIFICATION
02
This Class B digital apparatus complies with Canadian
ICES-003.
IC Caution: RSS-Gen Issue 4 December 2014"&"CNR-Gen 4e
Décembre 2014:
This device complies with IndustryCanadalicence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2)
This device must accept any interference, including
interference
that may cause undesired operation
of the device.
Radio Approvals:
FCC Part 15.249, FCC Part 15 B, RSS-210 (Canada), EN 300 440
(Europe), EN 301.489 (Europe), Japan Radio 2.4GHz Band
(Japan), MIC ARIB STD-T66 (Japan), California 65, CE.
FCC CERTIFICATION
03
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSEUNDESIRED OPERATION.
Warning: Changes or modications not expressly approved in
writing by Xvive may void the users authority to operate this
equipment.
RF Exposure Statement: This transmitter must not be
co-located or operated in conjunction with any other
antennae or transmitter.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and the receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
This Class B digital apparatus complies with Canadian
ICES-003.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SAFETY INSTRUCTIONS FOR LITHIUM-ION
RECHARGEABLE BATTERIES
04
Hereby, SHENZHEN FZONE TECHNOLOGY CO., LTD,
declares that this type of equipment is in compliance with
the essential requirements and other relevant
provisions of Directive 2014/53/EU
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE.
If abused or misused, the rechargeable batteries may leak. In
extreme cases, they may even present a risk of explosion, re,
heat, smoke or gas. Xvive does not accept any liability for
damagearising from abuse or misuse.
• Keep away from children.
• Only charge rechargeable batteries with chargers
recommended by Xvive.
• Observe correct polarity.
• Pack/store charged rechargeable batteries so that the
terminals cannot contact each other (danger of shorting
out/re hazard).
• Do not expose to moisture.
• Switch rechargeable battery-powered products o after use.
• Only charge rechargeable batteries at ambient
temperatures between 10°C/50°F and 40°C/104°F.
• When not using rechargeable batteries for extended
periods of time, charge them regularly
(about every three months).
• Do not mutilate or dismantle.
INFORMATION ABOUT COLLECTION AND
DISPOSAL OF OLD ITEMS AND
USED BATTERIES
Cd
05
These symbols on the products, packaging, or on any
documents in the package mean it is incorrect to mix the used
electrical and electronic products and batteries with general
household garbage.
• Do not heat above 60°C/140°F, e.g. do not expose to
sunlight or throw into a re.
• Immediately remove rechargeable batteries from obviously
defective products.
• Do not continue to use defective rechargeable batteries.
• Only use rechargeable batteries specied by Xvive.
• Dispose of rechargeable batteries at special collection
points or return them to your specialist dealer.
• Store the products in a cool and dry place at room
temperature (approx. 20°C/68°F).
• Remove the rechargeable batteries if the products will
not be used for extended periods of time.
To protect our environment, please take old products and
used batteries to proper collection places, and follow your
national legislation and the Directives 2012/19/EU and
2006/66/EC.
To deal with these old products and batteries
properly, please help
to save valuable resources
and prevent any possibility of side
eects on human health and our environment due to the
inappropriate disposal of the old products and used batteries.
You can contact your local authority for getting more helpful
information on how to dispose the recycling and collection of
the old products and batteries.
[For business users in the European Union]
If you want to discard electrical and electronic item, please
contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the
European Union]
These symbols are only valid in the European Union. Please
contact your local authorities or dealer for more information
on disposal of old items and used batteries.
1. Carefully observe all instructions in the U3/U3D manual
2. Do not to perform service operations beyond those
described in the U3/U3D Manual. Service is required when the
apparatus was damaged in any way, such as:
• liquid was spilled or objects were dropped into
the device,
• the unit was exposed to rain or moisture,
• the unit does not operate normally or signicant
changes in performance occur,
• the unit is dropped or the housing is damaged.
WARNING: BEFORE USING YOUR XVIVE U3/U3D MICROPHONE WIRELESS SYSTEM,
CAREFULLY READ THE OPERATING INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ THESE INSTRUCTIONS AND KEEP THEM
IN A SAFE PLACE
3. Do not place near heat sources, such as radiators,
heating ducts, or appliances which produce heat.
4. Guard the device against objects or liquids entering
the device. Do not use or store the unit close to water.
5. Clean only with a damp cloth.
6. Only use attachments/accessories specied by the
manufacturer.
7. Prolonged listening at high volume levels may cause
irreparable hearing loss and/or damage. Always be sure
to practice “safe listening.”
06
U3D SET PRODUCT INTRODUCTION
2x
2x
2x
1x
1x
2x
U3 Transmitter
U3 Receiver
USB Cable
XLR female to XLR male adapter
Manual
Bag
PACKAGE DETAILS
• Includes the U3 microphone wireless system (2 sets)
•The 2.4 GHz wireless band is ideal for wireless systems for
dynamic microphones and PA wireless systems, and is
approved for use worldwide.
•Less than 5 ms latency, simultaneous transmission on 6
channels
• wide frequency response range 20 Hz - 20 kHz
•Range up to 27 m / 90 feet (actual range depends on RF
signal absorption, reection and interference)
•5 hours of battery life (rechargeable battery for both
Transmitter & Receiver)
•Mic mode for microphones and Line mode for other audio
gear such as mixers
•Works with XLR-output dynamic and battery-powered-con-
denser microphones
• High-resolution 24-bit / 48 kHz audio
• Dynamic range: 110 dB
• Signal-to-noise ratio: 110 dB
07
• Two Transmitter + Receiver sets:
•For a stereo PA/DJ system with powered speakers, connect
the left PA XLR output to the left speaker and the right output
to the right speaker. For a dual mono setup, connect a
transmitter to the PA/DJ XLR output, connect receivers to
speaker one and speaker two, and set all three units to the
same channel. Microphone application: connect two dynamic
microphones to a mixer or another XLR-input audio device.
•The U3D is a simple, reliable, great-sounding and aordable
wireless solution for taking the tangle and inconvenience of
cables out of your PA/DJ sound system.
QUICK START: MICROPHONE APPLICATIONS
1. Plug the transmitter into your XLR dynamic microphone
or battery-powered condenser microphone.
2. Plug the Receiver into the Mixer.
08
QUICK START: MICROPHONE APPLICATIONS
3. Turn transmitter and receiver on
and check that they operate
on the same channel.
4. The LED on the transmitter will be
lit continuously after the connection
was established successfully.
5. Check the connection by talking
through the microphone.
Hello!
09
QUICK START: MONO CONNECTION TO A POWERED SPEAKER
10
Transmitter 1
Receiver 1
Receiver 1
Receiver 2
More Receivers
1. Connect the Transmitter to a Main
or Aux XLR output of the mixer or
other audio source.
2. Connect the Receiver to the
XLR input of a powered PA
loudspeaker or monitor.
3. Set the Receiver tothe same channel as
the Transmitter. The Transmitter can be
paired with two or more receivers, as long
as theyare all set tothe same channel.
Altri manuali per U3
3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Xvive Sistema microfonico
