Yamaha HY144-D Istruzioni per il montaggio

HY144-D Firmware Update Guide

Thank you for choosing a Yamaha product.

This guide explains how to update the built-in Dante module firmware (Dante firmware) integrated in

the HY144-D.

■

Precautions (Please be sure to read this section first!)

・The user assumes full responsibility for the update.

・Update the firmware components one unit at a time.

・Please note that the device may be damaged if you fail to follow these instructions properly, or

turn off the device or disconnect the cable while the update is in progress.

・If the update fails, and the device still does not operate correctly even after you execute the update

once again, please contact your Yamaha dealer.

・Yamaha Corporation owns exclusive copyrights for this update guide.

・Audinate owns exclusive copyrights for the Dante firmware and its update program.

・It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety,

without permission from the copyright owner.

・The screen shots in this guide are for use with this update procedure only and may be different

from the actual screen shots.

・Dante is a registered trademark of Audinate.

・Windows is a registered trademark of Microsoft ® Corporation in the United States and other

countries.

・Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.

・The company names and product names in this document are the trademarks or registered

trademarks of their respective companies.

■

Checking the version number

・You may check the Dante firmware version number from the FIRMWARE VERSION screen of

CS-R10/CS-R10-S/CSD-R7, RIVAGE PM Editor or Dante Firmware Update Manager of Audinate.

PM10 (FIRMWARE VERSION screen of the MAINTENANCE)

Dante Controller (Device View)

■

Preparing for the update

You will need the following items ready to execute the update procedure.

●A Windows or a Mac computer equipped with the following conditions:

OS Windows 7 (SP1), Windows 8.1 or Windows 10

OS X 10.10.5, OS X 10.11.5 or macOS 10.12

CPU

Intel Pentium 1.2GHz or Intel Celeron 1.7GHz or higher

HDD 250MB or more

Connector

An Ethernet connector that supports a data transfer rate of 100Mbps or

higher

●An Ethernet cable (CAT5e or higher recommended. Straight or cross.)

●The Dante firmware update program

Download the latest program from the following URL.

https://www.yamaha.com/proaudio/

■Update procedure sequence

Update each firmware component in the following sequence.

To update more than one HY144-D, configure “Computer TCP/IP setting (for Dante)” and perform

“Dante firmware update” one by one.

Install the Dante Firmware Update Manager

Computer TCP/IP setting (for Dante)

Updating the Dante firmware

・For details of the Dante Firmware Update Manager, refer to “AUD-MAN-Firmware Update Manager" stored in the

compressed file folder.

■

Install the Dante Firmware Update Manager

Before you update the Dante firmware, you must install the Dante Firmware Update Manager.

Double-click the Dante Firmware Update Manager installer downloaded in “Preparing for the update”

(Windows: DanteFirmwareUpdateManager-x.x.x.exe,

Mac: DanteFirmwareUpdateManager-x.x.x.dmg) and follow the on-screen instructions to install the

firmware.

x.x.x represents the version number of the Dante Firmware Update Manager.

In addition, extract the Dante firmware (extension: .dnt) from the compressed file.

The Dante firmware will not work correctly if the path contains any characters other than single-byte

alphanumeric characters, "-" (hyphen), or "_" (underscore). You must save the firmware update file in

a directory whose name contains only single-byte alphanumeric characters, "-" (hyphen), or "_"

(underscore). (E.g., C:\temp)

·The “Windows Security” dialog box may appear. In such case, click [Install this driver software anyway].

·You may be prompted to restart the computer after the installation is complete. Before proceeding to update,

restart the computer.

·When installing the Dante Firmware Update Manager, temporarily disable any running anti-virus software.

■

Computer TCP/IP setting (for Dante)

To update Dante firmware, configure computer TCP/IP settings.

Windows

Open the Network and Sharing Center as described below.

Windows 7

Select [Start] →[Control Panel], then click or double-click [Network and Sharing Center] or [View network

status and tasks].

Windows 8.1 and Windows 10

Right-click [Start] →[Control Panel], then click or double-click [Network and Sharing Center] or [View network

status and tasks].

The “Network and Sharing Center” is displayed.

Click [Manage network connection] or [Change Adapter settings] from the “Tasks” list located in the

left side of “Network and Sharing Center” window, then double-click [Local Area Connection].

The "Local Area Connection Status" dialog box will be displayed.

・The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

・If the "Local Area Connection properties" dialog box appears, skip ahead to step 4.

Click [Properties].

The “Local Area Connection properties” dialog box will be displayed.

・The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

Select [Internet Protocol Version 4 (TCP/IPv4)], then click [Properties].

The "Internet Protocol Version 4(TCP/IPv4) Protocol" dialog box will be displayed.

Click [Obtain an IP address automatically].

Click [OK].

Mac

Click [System Preferences] →[Network].

The “Network” dialog box will be displayed.

Click the service that you want to connect to the device.

If you're using the Ethernet port that's built into the Mac, click [Ethernet].

In “Configure IPv4,” choose [Using DHCP].

Click [Apply] button, then close “Network” dialog box.

■

Updating the Dante firmware

Described below are the procedures to update the Dante module firmware integrated in the HY144-D.

・Perform the update with the HY144-D installed to the DSP-R10 HY card slot 3/4, to the CSD-R7 HY card slot 2/3 or to

the RPio622/RPio222.

Connect the Dante [PRIMARY] connector of the HY144-D to the Ethernet connector on the computer

using an Ethernet cable.

Be sure to directly connect the computer and the HY144-D, and do not connect any other Dante device

to the computer.

Turn on the power to the device to which the HY144-D is installed.

Windows: Select [Start]→[All programs]→[Audinate]→[Dante Firmware Update Manager]→[Dante

Firmware Update Manager ] , then right-click and select “Run as Administrator.”

Mac: [Application]→[Dante Firmware Update Manager], then double-click “Dante Firmware Update

Manager.”

The Dante Firmware Update Manager will start up.

Check that the version number is 1.3.2 or higher from the title bar.

・The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

If you see the interface selection screen, select the interface card to connect the Dante device.

Click [Update Dante Firmware].

Click [Browse] and select “FWUpdate_HY144-D_vxxx_swyyy.dnt,” then click [Open].

xxx and yyy represent the firmware version number.

・The Dante firmware will not work correctly if the path contains any characters other than single-byte

alphanumeric characters, "-" (hyphen), or "_" (underscore). You must save the firmware update file in a

directory whose name contains only single-byte alphanumeric characters, "-" (hyphen), or "_" (underscore). (E.g.,

C:\temp)

(Only when updating from Dante firmware before version 3.8.1.4,) check the [Override Device

Matching].

Notice

When [Override Device Matching] is not checked, only devices supported in the update file are displayed. For

this reason, updating with wrong files is prevented.

However, it is necessary to check the [Override Device Matching] only when you update the HY144-D Dante

firmware from V3.8.1.4 or earlier to V3.10.4.1 or later.

Be sure to confirm the name of the update file to prevent updating with wrong files.

Click [Next].

・In some cases the Windows firewall may be blocking the Dante Firmware Update Manager. Select the [Private

network] check box, and click [Allow access]. Alternatively, in the Windows firewall, click "Allow programs or

functions through the Windows firewall," and if the "fum" checkbox is unselected, select this check box to allow

access.

If the update manager is blocked by the Windows firewall, the "Upgrade failed." dialog box appears.

Check the HY144-D to update.

Check the version of the update files and the version number indicated in the HY144-D line.

・If the HY144-D is not indicated, click [Refresh]. If it is still not indicated, use Dante Controller to check whether

the cable might be disconnected or broken, whether the TCP/IP settings are correct or not, and whether the device

which is installed the HY144-D is running or not.

10.

Click [Start].

The update operation will begin.

“Updating(n/m)” appears in the Status field during updating. “Done” is displayed once update is completed.

Notice

Update takes 2 to 4 minutes. During the update operation, do not turn off the power to the unit or disconnect the

cable. If update fails due to disconnection of the power cable during the update, or due to other reasons, the device

may become inoperative.

・If the update is not completed after 5 minutes, or an update failure indication appears, click X at the upper right

corner of Dante Firmware Update Manager to exit the program

without turning off the power of the device to

which the HY144-D is installed,

and restart the procedure from the step 3. If update still fails, follow the

instructions stated in “About Failsafe Mode” to perform the recovery process.

11.

Turn off the power to the device to which the HY144-D is installed.

The firmware update is now complete.

■

About Failsafe Mode

The Dante module integrated in the HY144-D may become unusable due to data corruption if the

Dante device is powered-off during a firmware update.

To recover from such a state, the Dante module will enter "failsafe mode."

To restore the Dante module from failsafe mode, a recovery image must be sent from the Firmware

Update Manager.

If the red ERROR indicator of the HY144-D is lit, it may be that the Dante module is in failsafe mode.

Use Dante Controller to check whether the Dante module is in failsafe mode.

A Dante module that is in failsafe mode is shown as a red device name in the network grid view of

Dante Controller (version 3.1.x or later).

Altri manuali per HY144-D

Altri manuali Yamaha Accessori

Yamaha

Yamaha FC9 Manuale utente

Yamaha

Yamaha Audiogram 6 Manuale utente

Yamaha

Yamaha SPM-10TV Manuale utente

Yamaha

Yamaha FC7 Manuale utente

Yamaha

Yamaha SPCVR-18S01 Manuale utente

Yamaha

Yamaha i88x Manuale utente

Yamaha

Yamaha AIC128-D Manuale utente

Yamaha

Yamaha L-2C Guida all'installazione

Yamaha

Yamaha FC9 Manuale utente

Yamaha

Yamaha UW10 Manuale utente

Yamaha

Yamaha Audiogram 3 Manuale utente

Yamaha

Yamaha SPM-10TV Manuale utente

Yamaha

Yamaha G1D Manuale utente

Yamaha

Yamaha PCY60 Manuale utente

Yamaha

Yamaha FW16E Manuale utente

Yamaha

Yamaha AIC128-D Manuale utente

Yamaha

Yamaha i-MX1 Manuale utente

Yamaha

Yamaha SP1000 Manuale utente

Yamaha

Yamaha SP02R96 Manuale utente

Yamaha

Yamaha disklavier DKC-850 Manuale di istruzioni

Yamaha

Yamaha FC900 Manuale utente

Yamaha

Yamaha SWK-W10 Manuale utente

Yamaha

Yamaha Arius YDP-V240 Manuale utente

Yamaha

Yamaha GO46 Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente