YellowStone 4G LTE Manuale utente

Yellowstone.ai 4G LTE Trail Camera User Manual

100° and 52° Lens Models

Last Updated: August 18, 2021

Welcome to the Yellowstone.ai family.

We sincerely appreciate you buying a Yellowstone.ai camera and

we hope you enjoy it. At Yellowstone.ai we strive to build cameras

and software that are supremely user-friendly and reliable, but we

know there is always room for improvement. The user experience

remains at the heart of everything we do, and we welcome

feedback on how we can improve.

Sincerely,

The Yellowstone.ai Team

[email protected]

(970) 821-8525

Table of Contents

Activation Guide

............................................................................................................... 3

1.1 Create a Yellowstone.ai Command Center Account ......................................................... 3

1.2 Activate Camera .................................................................................................................... 3

1.3 Prepare Camera ..................................................................................................................... 3

1.4 Connect to the Network ....................................................................................................... 4

1.5 Receive Your First Image ...................................................................................................... 4

What’s in the Box

............................................................................................................ 5

Getting to Know Your Camera

....................................................................................... 6

3.1 Front View .............................................................................................................................. 6

3.2 Inside View ............................................................................................................................. 7

SD Card and Image Storage

........................................................................................... 8

4.1 General Information .............................................................................................................. 8

4.2 Formatting Your SD Card ..................................................................................................... 8

4.3 Viewing Images or Videos .................................................................................................... 9

4.4 Deleting Images or Videos ................................................................................................... 9

Camera Settings

............................................................................................................. 10

5.1 Adjusting Your Settings ...................................................................................................... 10

5.2 Settings (Cam) ..................................................................................................................... 11

5.3 Settings (PIR) ....................................................................................................................... 12

5.4 Settings (4G) ........................................................................................................................ 13

5.5 Settings (Other) ................................................................................................................... 13

5.6 Memory ................................................................................................................................. 14

Camera Specifications

.................................................................................................... 15

Mounting Your Camera

.................................................................................................. 16

Troubleshooting & Questions

....................................................................................... 16

1. Activation Guide

For a full video walkthrough about activating your camera, please visit

https://yellowstone.ai/support

1.1 Create a Yellowstone.ai Command Center Account

1. Visit my.yellowstone.ai

2. Login or create a new account

1.2 Activate Camera

1. Locate the camera’s ICCID – This is a 20-digit number printed inside the camera

2. In your Command Center at my.yellowstone.ai, click ‘Activate New Camera’ on the

Cameras tab

3. Enter ‘Location’ label to identify where your camera will be (can be updated later)

4. Enter the ICCID (from step 1)

5. Enter payment information

6. (Optional) Download our Mobile App

a. Search “Yellowstone.ai Command Center” in the App Store or Google Play Store

b. Download app and login

c. Set Push Notifications on the Camera’s tab (if desired)

1.3 Prepare Camera

1. Open the camera case by flipping the latch on the side of the camera

2. Insert 12 AA batteries to fill the entire battery compartment. Batteries must be new and

all the same type.

3. Screw your antennas into each of the two antenna ports

1.4 Connect to the Network

1. Underneath the LCD screen, flip the switch to ‘SETUP’

2. Your camera’s screen should turn on and display the camera’s view

a. If the screen does not turn on and you are using new, fully-charged batteries, then

something is awry, please call us.

3. While the camera is searching for signal and synching with the server, you will see

‘Searching…’ or ‘GPS Searching…’ in the top left of the screen. This process may take 3

minutes to complete. If your camera displays ‘No Signal’ and you’ve activated a data plan

at my.yellowstone.ai, then turn the camera off for ten seconds, then up to setup mode to

initiate a new search for signal. You may need to do this up to five times. After five tries,

call us for help.

1.5 Receive Your First Image

1. After your camera connects to a cellular network, it will be ready to take and send pictures

to your phone/computer.

2. To send a test picture, press the ‘OK’ button while the camera is in ‘SETUP’ mode and

connected to the network. Your camera will display “Sending…” then “Send Succeed.”

Refresh the media/images tab on your Yellowstone.ai Command Center account to verify

that your picture has been sent.

If you are having issues sending or viewing pictures, please visit

https://yellowstone.ai/troubleshooting or call us.

2. What’s in the Box

Camera

2x 4G Antennas

4G LTE SIM Card

SD Card

Mounting Strap

3. Getting to Know Your Camera

3.1 Front View

Lens

Latch

PIR Sensor

GPS Antenna Port

IR LED Array (x27)

IR LED Array (x30)

Indicator Light

Day/Night Sensor

4G LTE Service Antenna Port

3.2 Inside View

To open camera, flip the latch on the side of the camera case

USB

Port

SD Card

Slot

Navigation

Buttons

Power Switch

(ON/OFF/SETU

Button

LCD

Screen

SIM Card

Slot

AA Battery

Slots

12V

Input

for Solar

4. SD Card and Image Storage

4.1 General Information

• The SD slot of the camera has a maximum capacity of 32 GB (larger SD cards use a different

file transfer protocol, which will not function with your camera)

• Before inserting or removing the memory card, the camera must be switched to "OFF"

o Failing to do so may cause loss of pictures & videos and damage the camera and

memory card

• When the SD card is full, the viewing screen shows "Memory Full"

Note: By default, your camera will delete the oldest images when your SD card fills up, in order

to continuously make room for new images. For more information, please visit the camera settings

and optimization section of our website.

4.2 Formatting Your SD Card

Warning: Formatting your SD card will result in a loss of all data on the card.

Note: SD card must be formatted as FAT32. All cameras ship with a SD card that is pre-

formatted correctly.

There are three ways to format your SD card:

Option 1: With the SD card inserted in your camera

1. Switch camera to setup mode

2. Press the up arrow to access images

3. Press menu to access SD card options

4. Format > Yes > Yes

Option 2: Insert SD card into the SD port on your computer

1. Locate the SD card among your files

2. Right click on the SD Card and select Format

3. Ensure FAT32 is selected

Option 3: Connect Camera to computer via USB cable

(same steps as #2 above)

4.3 Viewing Images or Videos

On Your Computer

1. Insert SD card into computer or connect camera to computer via USB cord

2. Access the DCIM folder within the SD card

Windows

a. Use windows explorer to find the name of your SD card (or camera)

b. Click the associated icon to display the contents of the SD card

c. Open the ‘DCIM’ folder, then ‘MEDIA’ folder

Mac

a. Find the mounted icon on your desktop (or in Finder) with the name of your SD card (or

camera)

b. Click the associated icon to display the contents of the SD card

c. Open the ‘DCIM’ folder, then ‘MEDIA’ folder

On Your Camera (with SD card inserted)

1. Switch camera to ‘SETUP’ mode

2. Press the up arrow to access images

3. Use arrow buttons to cycle through the images

4.4 Deleting Images or Videos

By default, your camera will be set to delete the oldest pictures on the card to make room for new

pictures when space is needed. Your pictures will be saved in the cloud when they are sent to

your Yellowstone.ai Command Center, and will be viewable (in the quality by which they are

sent) even after they are deleted from the SD Card.

Formatting

Formatting your SD card (see 4.2) will delete all images and videos on the card

On Your Computer

While viewing images on your computer (see 4.3), you can delete or transfer pictures from the SD

card as you view them

On Your Camera

1. While viewing images on your camera (see 4.3)

2. Press the ‘MENU’ button

3. Select the ‘Del’ option by pressing the ‘OK’ button (‘Del’ should be selected by default)

4. Choose to delete either the currently viewed picture (‘One’) or all pictures on the SD card

(‘All’)

Altri manuali per 4G LTE

Indice

Altri manuali YellowStone Telecamera da ricognizione

YellowStone

YellowStone 4G LTE Manuale utente

Manuali Telecamera da ricognizione popolari di altre marche

Nestbox

Nestbox C13 Manuale utente

Wildview

Wildview STC-TGL1 Manuale utente

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manuale utente

Suntek

Suntek HC-800M Manuale utente

Spypoint

Spypoint G4 Manuale utente

Duramaxx

Duramaxx 10029765 Manuale utente

Brecom

Brecom C2400 Manuale utente

BlazeVideo

BlazeVideo A280W Manuale utente

Bestok

Bestok 5210GM Manuale utente

GardePro

GardePro X60P Manuale utente

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manuale utente

PNI

PNI HUNTING 280C Manuale utente

Muddy

Muddy Pro-Cam 14 Manuale utente

Bresser

Bresser 3310006 Manuale utente

Recon Outdoors

Recon Outdoors HS410 Manuale utente

Braun

Braun 57660 Manuale utente

Wildgame

Wildgame Shadow Manuale utente

Spypoint

Spypoint FLEX Manuale utente