YesCam Yes727 Manuale utente

Yes727

Outdoor Mega-pixel

IP Network Camera

User Manual

Date: 2015/3/9

Outdoor Mega-pixel IP Camera

Table of Contents

LIST OF FIGURES AND TABLES......................................................................................................4

1. INTRODUCTION..........................................................................................................................6

2. HARDWARE DESCRIPTION AND QUICK INSTALLATION/USAGE ................................8

2.1. MAJOR HARDWARE COMPONENTS. .........................................................................8

2.2. QUICK INSTALLATION AND USAGE..........................................................................10

2.3. WIRELESS CONNECTION (IF ROUTER/AP HAS WPS BUTTON) .......................15

2.4. WIRELESS CONNECTION (IF WPS NOT SUPPORTED ON ROUTER/AP)........15

2.5. PUSH NOTIFICATION.....................................................................................................16

3. WEB CONFIGURATIONS........................................................................................................18

3.1. INFORMATION.................................................................................................................19

3.2. NETWORK ........................................................................................................................20

3.3. WIFI SECURITY ...............................................................................................................22

3.4. ADVANCED NETWORK.................................................................................................25

3.5. VIDEO SETTINGS ...........................................................................................................26

3.6. MOBILE VIDEO SETTINGS...........................................................................................28

3.7. NIGHT MODE CONTROL...............................................................................................29

3.8. EMAIL/FTP ALARM.........................................................................................................30

3.9. NAS SETTINGS ...............................................................................................................33

3.10. CLOUD STORAGE SETTINGS.....................................................................................35

3.11. SD-CARD SETTINGS......................................................................................................37

3.12. SCHEDULING...................................................................................................................39

3.13. LED DISPLAY CONTROL ..............................................................................................41

3.14. DATE/TIME........................................................................................................................42

3.15. ADMIN................................................................................................................................43

3.16. UPGRADE.........................................................................................................................44

3.17. REBOOT............................................................................................................................46

3.18. SET TO FACTORY DEFAULT........................................................................................47

4. FEATURES AND SPECIFICATIONS......................................................................................48

4.1. FEATURES........................................................................................................................48

4.2. SPECIFICATIONS ...........................................................................................................49

5. PACKAGE CONTENTS............................................................................................................51

APPENDIX A. LIST OF TESTED NAT/ROUTER DEVICES........................................................52

APPENDIX B. MAXIMUM ALLOWED VIDEO USERS.................................................................53

Outdoor Mega-pixel IP Camera

APPENDIX C. PERFORMANCE INFORMATION .........................................................................54

APPENDIX D. TROUBLE SHOOTING............................................................................................55

APPENDIX F. SNAPSHOT PICTURE ON ANY BROWSER........................................................58

Outdoor Mega-pixel IP Camera

List of Figures and Tables

Figure 2-1: Major Components in The Front Panel

Figure 2-2: Major Components in The Back Panel

Figure 2-3: Mounting The Camera on Wall or Ceiling

Figure 2-4: IP CAM Connection Diagram.

Figure 2-5: Connect Ethernet Cable to A Switch/Router.

Figure 2-6: The Installation CD Disk

Figure 2-7: The ID/Password Card

Figure 2-8: Running Window of YesCam View Program

Figure 2-9: Pop-up Play-Video Password Window

Figure 2-10: Unplug The Ethernet Cable to Enable The WiFi Function

Figure 3-1: Open The Web Configuration Page from YesCam View Software

Figure 3-2: IP CAM Web Configuration Login Page

Figure 3-3: IP CAM Information Page

Figure 3-4: Video Display Page

Figure 3-5: Network Settings Page for DHCP Function

Figure 3-6: Network Settings Page for Fixed IPAddress

Figure 3-7: WiFi Security Disabled Page

Figure 3-8: WiFi Security Enabled Page

Figure 3-9: WiFi Testing Page

Figure 3-10: Advanced Network Settings Page

Figure 3-11: Video Settings Page

Figure 3-12: Mobile Video Settings Page

Figure 3-13: Night Mode Control Page.

Figure 3-14: Email/FTPAlarm Page

Figure 3-15: SMTP Server Settings Page

Figure 3-16: NAS Storage Settings Page

Figure 3-17: Cloud Storage Settings Page

Figure 3-18: Cloud Storage Logged in Page

Figure 3-19: SD-Card Settings Page

Figure 3-20: SD-Card Information Page

Figure 3-21: Schedule Management Page

Figure 3-22: Led Control Settings Page

Figure 3-23: System Date/Time Settings Page

Figure 3-24: Admin Settings Page

Figure 3-25: Firmware Upgrade Settings Page

Figure 3-26: Firmware Upgrade Status Page

Outdoor Mega-pixel IP Camera

Figure 3-27: System Reboot Settings Page

Figure 3-28: System Reboot Under-Going Page

Figure 3-29: Stick on The Reset Button to Set to The Factory Default

Figure 5-1: The IP Camera Body

Figure 5-2: Power Adaptor

Figure 5-3: Quick Installation Guide

Figure 5-4: Warranty Card

Figure 5-5: Installation CD

Figure 5-6: ID/Password Card

Figure 5-7: Ethernet Cable

Figure 5-8: Anchors and Screws

Figure 5-9: Splitter Cable

Figure 5-10: RJ45 Coupler

Table A-1: List of Tested Wireless AP/Router Devices

Table A-2: List of Tested Wired NAT/Router Devices

Outdoor Mega-pixel IP Camera

1. Introduction

The IP Camera is designed for all day video surveillance on your iPhone/iPad

and Android mobiles/pads. The setup is truly 1-2-3 :

1. Connect the camera to the network

2. Download the app mYesCam View into your iPhone/iPad orAndroid

3. View video by the camera ID/password

The camera is for outdoor usage, with the IP66 rated housing, the camera is

totally dust and rain proof and suitable for operation under poor weather condition.

With the 24V power adapter and splitter cable, the camera can be powered through

Ethernet cable for up to 50 meters. No PoE switch is needed.

The push notification is supported, so that you will get the notification from your

iPhone/iPad and Android once there is an event detected through the motion

detection or sound detection on the camera, even when your mobile is on sleep

mode.

The SD card recording is supported, and you could playback the recorded video

on your iPhone/iPad andAndroid. You could also do the SD card recording only when

there is motion or sound detection to save the SD card storage size. The motion and

sound detected recording has a 5 seconds pre-recording, so that you will always

catch the critical moment.

The NAS and cloud storage is supported. You can record the video files

into any normal NAS devices or to your Dropbox account. And you can

playback those recorded video files remotely on your mobile devices or

computers.

For day & night usage, there are two video sensors/lenses on the camera, one for

day and one for night. The day lens and night lens focus are separately focused for

day light and Infra Red light for best video quality. No ICR, no mechanical problem.

The WPS(WiFi Protected Setup) is supported. You could set up the WiFi

connection of the camera with the router by clicking the WPS button on the camera

and on the router at the same time. No more complicated WiFi configuration.

Outdoor Mega-pixel IP Camera

The IP camera is ideal for securing small businesses, home offices and

residences. The IP Camera is a perfect replacement of the alarm system and

traditional analog CCTV camera in your house and shop..

The differences

It’s very easy to see the video of the IP Camera, you only need to key in the

ID/Password of the IP CAM any where in the world, you do not need to remember the

IP address or domain name or DDNS name or port number. And you do not need to

modify the settings(like port mapping, fixed IP, DDNS, virtual server) of the NAT/router

devices, it’s just a plug & play usage.

So, the differences are the followings:

Public IP address needed ? No

Dynamic DNS needed ? No

Port mapping in router? No

Virtual server in router ? No

UPnP support in router ? No

What’s needed ? ID and Password

Outdoor Mega-pixel IP Camera

2. Hardware description and quick installation/usage

The IP CAM is designed to be very easy to install and use. First, let’s see the

major components of the IP CAM products.

2.1. Major hardware components.

The major components on the front panel of the IP CAM products are the

followings :

1. Lens –the lens is inside the camera body and the focus of the lens is fixed, you do

not need to spend time to adjust the focus, the effective focus range is from 30cm

to infinity. There are two lens for day and night usage separately.

2. IR LED –there are three IR LEDs for the night mode usage.

3. Status indication LED (red) –this LED is to indicate the Internet connection status.

When the Internet connection is connected, the LED will be constant red light. If

there is any Internet connection problem, the LED will be blinking red light.

4. Ethernet indication LED (blue) –this LED is to indicate if the Ethernet link is ok

and packet traffic is sending/receiving. When the Ethernet cable is connected, the

LED is constant blue light. When there is packet sending/receiving, the LED is

blinking blue light.

5. SD card LED –for the indication of the SD card activity (recording ).

6. Light detector –for switching between day time and night time automatically.

Figure 2-1: Major components in the front panel

Outdoor Mega-pixel IP Camera

The major components on the back panel and bottom of the IP CAM products are the

followings:

1. Power and Ethernet jack –use the accompanied splitter cable to connect to power

adapter and Ethernet network. You could also extend the cable by using the

accompanied RJ45 coupler as shown in Fig.2-3. The power needed for this IP

CAM is 12V/1.0A, please make sure you are using the correct power adaptor.

When the Ethernet link is ok, the Ethernet indication LED on the front side will be

blue light.

2. Microphone –for receiving the audio/voice. Effective distance is about 5 meters.

3. Micro-SD card slot –for inserting the micro SD-Card. (support up to 32G bytes)

4. WPS button –for the setup of the WiFi connection with WPS function.

5. Reset button –this is the button to reset the IP CAM to default factory settings.

You need to use a small stick like pencil or tooth stick to press the reset button for

more than 3 seconds to enable the reset function. Usually when you forgot the

administrator account, you will probably need to do this reset action to reset to the

default factory settings. Please refer to section 3.19 for more details.

Figure 2-2: Major components in the back panel

Outdoor Mega-pixel IP Camera

Figure 2-3: Mounting the camera on wall or ceiling

2.2. Quick installation and usage

There are only three things that you need to do to see the video from the IP CAM.

1. Connect the IP CAM to the home/office network.

2. Install the YesCam View/app software on the notebook/PC/mobiles.

3. Key in the ID/password of the IP CAM(from the ID/Password card) on the YesCam

View, and then you can see the video.

First, Connect the IP CAM to the home/office network

Please connect the IP CAM accessaries to the IP CAM body correctly, including the

power adapter and Ethernet cable, as shown in Figure 2-4. And connect the other end

of the Ethernet cable to the home network or office network. Usually, this Ethernet

cable is plugged into a home NAT/router device or an Ethernet switch if in the office,

as shown in Figure 2-5. Since the default settings of the IP CAM use DHCP function

and very often there is a DHCP server on most of the Home/office network, the IP

CAM should be connected to the Internet immediately. The Internet status LED is

constant red light to indicate this good connection status. If the LED is blinking, please

refer to section 3.3~3.5 to try other network settings.

Altri manuali per Yes727

Indice

Altri manuali YesCam Telecamera IP

YesCam

YesCam Yes737 Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente