YESKAMO 2MP Manuale utente
CONTENTS
Ⅰ. Device Overview ............................................................ 1
Ⅱ. Connection Guide ...................................................... 2
Ⅲ. Operation on Device Interface .............................. 9
Ⅳ. Camera Installation ...................................................... 14
Ⅴ. Statement ........................................................................ 16
Ⅵ. Safety Caution .................................................................. 17
Ⅶ. Product Specification ................................................ 18
Ⅸ. FAQ .................................................................................... 20
X. Support .............................................................................. 25
YESKA M O
-1-
RJ45
Reset Button
Power input
SD Card Slot
Light Sensor
Lens
IR Light
Microphone
Loudspeaker
Ⅰ. Device Overview
5
6
7
8
9
1
2
3
4
YESKA M O
-2-
Camera Router Mobile
1. Wireless Connect Camera
Light Sensor: plug the camera, the red light will turn on, and
be off in a minute.
Lens: 3.6mm, 2MP/3MP
IR Light: auto switch at night
Microphone: pick up audio
Loudspeaker: transmit sound
RJ45: Ethernet port, hard wire camera with router
Reset Button: Press and hold reset button about 10-12
seconds to restore camera to factory setting
Power input: connect with provided 5V 1.5A plug for power
supply
SD Card Slot: Insert SD card (The package doesn’t include)
for video storage. Support max 128G, in FAT32 format.
Please turn off the device when insert or remove a card.
Ⅱ. Connection Guide
1
2
3
4
5
6
7
8
9
YESKA M O
-3-
QR MIPC
Download MIPC APP on iOS or Android mobile/iPad
Always make sure that your camera has the latest
firmware as listed on MIPC app.
Before connecting to your camera, please confirm
your home Wi-Fi network is 2.4Ghz, and the camera
is less than 10 meters away from the router.
Meanwhile the camera and your phone should be
connected to the same WIFI.
Tips:
Scan the QR code or search "MICP" in App Store or Google
play, and download the APP.
Step 1: Download app and register new account
YESKA M O
-4-
Tap “+” in the upper
left corner
Select the PTZ
Camera type.
Step 2: Add ID on phone app
Connect the camera to the power source, the red light will turn
on. (when the red light turn off, you will get "tick" sound)
1 2 3
Scan the QR code
which is on the
bottom of the
camera
Manually add ID and
password (admin)to
enter the “add a new
device” screen.
YESKA M O
-5-
Step 3: Wi-Fi Setup for camera
Select WIFI
connection.
Press the reset
button for about 1-2
second, you will hear
the voice that starts
receiving wireless
configuration.
NOTE: Long press
for 10-12 seconds
restores the factory
setting
Input WIFI password.
4 5 6
YESKA M O
-6-
WIFI Connection
(it will take about
1 minute to
connect)
Change password,
(Never use the
default password for
your camera. Always
ensure that your
password is at least
8 characters long
and contains a
combination of
lowercase charac-
ters, uppercase
characters as well as
numbers.NO special
character).
Now you can enjoy
the real-time preview.
7 8 9
YESKA M O
-7-
Camera Router Mobile
2. Wired Connect Camera (Option)
The most stable way to connect camera
Select Ethernet.Connect
the camera to the router
through network cable.
1 2 Change Password
( Never use the default password for your camera.
Password is at least 8 characters long and contains a
combination of lowercase characters, uppercase
characters as well as numbers. NO special character ).
YESKA M O
-8-
Input WIFI password. Now you can enjoy the
real-time preview.
43
YESKA M O
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali YESKAMO Telecamera IP
