Yueming MF20 Manuale utente

Product Manual

Laser Marking Machine

Applicable model: MF20

GD Han’s Yueming Laser Technology co.,Ltd.

GD Han’s Yueming Laser Technology co.,Ltd (Han’s Yueming Laser hereafter) reserves

the right to modify the products and product specifications described in this manual without

advance notice.

Han’s Yueming Laser is not responsible to any direct, indirect, or consequential damage or

liability caused by improper use of this manual or the product.

Han’s Yueming Laser owns the patent, copyright or any other intellectual property right of

this product and the related software. No one shall duplicate, reproduce, process or use this

product and its parts, unless authorized by Han’s Yueming Laser.

All the name refered in this manual only for identification, if belongs to other company’s

registered trademark or copyright, proprietary rights of the name belongs to their respective

holder.

III

Disclaimer and Responsibility Statement

Whole using the machine from our company, users are required to ensure integrity and

independence of the product including but not limited to: mechanical, electrical, optical, control

software and accessories. Unauthorized modification is strictly prohibited. It is a must to satisfy

operating environment and operating specifications specified in the owner’s manual.For the

followings:

Machine modified with no authorization (including but not limited to: add, remove,

modify, unauthorized disassembly, replacing parts);

Use the machine in the environment failing to satisfy the operating requirements;

Operate disobeying the specifications of our company;

Unauthorized use the machine parts, accessories and auxiliaries on to other machine or

in other places;

Viciously disassemble, destroy, decode hardware and software of the machine from

our company

Our company shall not undertake any direct, indirect or joint responsibility. Our company

reserves the rights to ascertain legal responsibility for the serious consequences or economic

losses or reputation losses caused by what mentioned above.

Foreword

Thanks for purchasing the laser engraving machine control system of our company.

Before operating, please read this manual carefully to ensure proper operation.

Please keep the manual properly for reference.

Since the configs are different, certain models do not have the functions listed in this

manual. Please refer to the specific functions for details.

Due to the constantly tech update, the specification for reference only, subject to the real

standard.

Tags in this book：

Alarm

Special Attention: User must follow and perform as the manual. Otherwise, it

could lead to errors or relatively serious problem.

Note

Note: User should comply with the attention and suggestion in this manual. it

could bring much easier operation.

Safety Precautions

Attention

▴Before using the machine, users are required to carefully read this manual and other operating

requirements, strictly abide by the operating specifications. Professional are required for operating

the machine.

Attention

▴The machine uses class 4 laser (strong laser radiation). The laser radiation may possibly cause

the following accidents: ① emblaze the surrounded flammable materials; ② generate other

radiations and toxic or hazardous gas by processed objects during laser processing; ③ direct

irradiation of laser radiation cause harm to human body. Therefore, firefighting devices are

required in the operating place of the machine. Stacking flammable or explosive objects near the

machine is strictly prohibited. Good ventilation is a must. Only the qualified personnel are

authorized to approach the machine.

Attention

▴The processed objects and discharged materials are required to satisfy requirements as per local

laws and regulations.

Attention

Laser processing is with potential risks. Users should carefully make sure if the processed

objects are suitable for laser processing.

There is high voltage and potential risk in the laser machine. Unauthorized disassembly by

unqualified personnel is prohibited.

Reliable earthing is required for the machine and related other machine before power-on.

During operating, removing any cover of the machine is strictly prohibited.

During operating, the operators are required to observe working status of the machine all the

time. In case of any abnormality, it is immediately to disconnect power supply and take active

and corresponding measures.

After power-on, special personnel are required for monitoring. Unauthorized leaving is strictly

prohibited.

It is a must to disconnect the power supply before leaving.

Attention

It is strictly prohibited to placing any unrelated all-reflective or diffusion reflective objects in

the machine to prevent laser reflecting to human body or flammable materials.

Attention

The environment for the machine should be dry, free of interference and influences from

pollution, vibration, high voltage and strong magnet. The operating ambient temperature

ranges 5-40℃, and the humidity ranges 5-95% (no dew);

The machine should be far from electric appliances sensitive to electromagnetic interference;

Operating voltage: AC220V, 50Hz. Power-on is strictly prohibited in case of unstable voltage

of the power grid or unspecified voltage.

Attention

Chapter two of this manual is for Safety Rules. Please refer to the chapter more details

concerning safe operation of the machine. Users are required to carefully read and abide by

all the requirements of safety.

Table of Contents

Copyright Statement ......................................................................................................... II

Disclaimer and Responsibility Statement......................................................................... III

Foreword .......................................................................................................................... IV

Safety Precautions............................................................................................................. V

Table of Contents ............................................................................................................. VI

Equipment Overview .................................................................................. 1Chapter 1

1.1 Equipment Composition ......................................................................................... 2

1.1.1 Overall Components ....................................................................................... 2

1.1.2 Mechanical Components ................................................................................ 4

1.1.3 Optical Components ....................................................................................... 5

1.1.4 Electrical Components .................................................................................... 6

1.2 Equipment Parameters ........................................................................................... 8

1.3 Product Configuration............................................................................................. 9

1.4 Operating Environment......................................................................................... 10

1.5 Suitable Materials ................................................................................................. 10

1.6 Application ............................................................................................................ 10

Safety Rules............................................................................................... 11Chapter 2

chapter2..................................................................................................................... 11

2.1 Warning and signs................................................................................................. 11

2.2 Product safety ....................................................................................................... 11

2.3 Safe equipment..................................................................................................... 11

2.4 Safety awarenes.................................................................................................... 12

2.5 Requirements for personnel ................................................................................. 12

2.5.1 Definition of terms........................................................................................ 12

VII

2.5.2 Qualifications ................................................................................................ 13

2.5.3 Responsibility................................................................................................ 13

2.5.4 Personal protective devices.......................................................................... 13

2.6 Special product risks ............................................................................................. 13

2.6.1 Laser radiation risk........................................................................................ 13

2.6.1.1 Common mode..............................................................................................14

2.6.1.2 Direct laser ....................................................................................................14

2.6.1.3 Reflection and diffuse radiation....................................................................14

2.6.2 High voltage risk............................................................................................ 15

2.6.3 Risk of electric shock..................................................................................... 15

2.6.4 Risk of process by product............................................................................ 16

2.6.5 Risk of optical system.................................................................................... 17

2.6.5.1 Routine operation .........................................................................................17

2.6.5.2 Warning for fire accident ..............................................................................18

2.6.6 Other risks..................................................................................................... 18

2.6.7 Measures for emergency.............................................................................. 18

2.6.7.1 Measures for personal injury........................................................................18

2.6.7.2 Measures for fire accident ............................................................................18

chapter3. Equipment Installation and Commissioning ............................................. 19

3.1 Equipment Installation.......................................................................................... 19

3.1.1.1 Unpacking Steps............................................................................................19

3.1.1.2 Unpacking......................................................................................................20

3.1.1.3 Preparation ...................................................................................................21

3.1.2 Installation Steps........................................................................................... 21

3.1.2.1 Installing Fiber Laser Marking Cavity ............................................................21

3.1.2.2 Installing Computer, Keyboard & Mouse......................................................22

VIII

3.1.2.3 Installing Scanning Focus Lens ......................................................................22

3.1.2.4 Connecting Galvanometer Cable ..................................................................23

3.1.2.5 Installing Footswitch .....................................................................................23

3.1.2.6 Installing Sensor and Encoder (marking on the fly optional)........................23

3.1.2.7 Equipment Grounding...................................................................................23

3.2 Buttons and Indicators Description....................................................................... 26

3.2.1 Installing Other Accessories.......................................................................... 27

3.3 Equipment Debugging........................................................................................... 28

3.3.1 Switch sequence ........................................................................................... 28

3.3.2 Galvanometer Marking Test ......................................................................... 28

3.3.3 Laser Test ...................................................................................................... 28

3.3.4 IO Test ........................................................................................................... 28

3.3.5 Sensor and Encoder Test (optional).............................................................. 29

chapter4. System Maintenance ................................................................................ 30

4.1 Mechanical Maintenance...................................................................................... 30

4.2 Electrical Maintenance.......................................................................................... 30

4.3 Maintenance of Optical Path and Optical Devices................................................ 30

4.4 Auxiliary Machine Maintenance ........................................................................... 32

chapter5. Troubleshooting........................................................................................ 33

Appendix.......................................................................................................................... 35

Appendix 1 Electrical Control System Block Diagram of Main Power......................... 35

5.1.1 ...................................................................................................................... 35

Post.................................................................................................................................. 36

Equipment OverviewChapter 1

MF20 is a new generation fiber laser marking machine, which adopts modular design. The

optical bench, working platform and elevating working platform are separated and also can be

freely combined, which greatly improve the product's adaptability and flexibility. It is configured

with the new digital marking control system and powerful upper machine software, which can

meet the marking applications of different industries. It applies to stationary work surface

marking, rotary marking, mobile stitching marking, as well as assembly line marking on the fly.

The optical bench features multiple DOF adjustment functions (6 DOF), allows multi-directional

multi-angle rotation, and applies to the marking on different work surfaces. The core laser and

optical system are imported high-performance foreign products, which ensure that the machine

features better marking performance, higher accuracy, faster and more stable.

Description of equipment model:

Fig. 1-1 Description of Equipment Model

Auxiliary model

description:

A: Common

B: Offline embedded

C: Europe and America

P: Portable

Equipment series:

MF: Fiber laser marking

machine

……

Laser power:

20: 20W

……

-A

1.1 Equipment Composition

Due to different machine models and product update, some models may have different

appearances and details. The actual product shall prevail. Below is the equipment composition of

MF20.

1.1.1 Overall Components

The front view of the machine is as shown in Fig. 1-2:

Fig. 1-2 FRONT VIEW

①Optical scanner galvanometer

②Optical scanner

field lens

③Elevating

handwheel

④XY adjustment platform

⑤Operation panel

⑥Keyboard drawer

⑦Host computer

(internal)

⑧Fiber laser (internal)

⑨Fiber output head

⑩Monitor

⑪Cooling fan

⑫Electrical box (internal)

○

Indice

Altri manuali Yueming Stampante

Yueming

Yueming CMA1325C-B-A Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente