ZALMAN VF900-Cu Manuale utente

PPlleeaassee vviissiitt oouurr wweebbssiittee aanndd wwaattcchh tthhee VVFF990000--CCuu iinnssttaallllaattiioonn vviiddeeoo ffoorr eeaassyy

iinnssttaallllaattiioonn..

※ Applies to VF900-Cu LED.

※ Please read this manual thoroughly before installation.

※ The specifications of this product and its components may change without prior

notice to improve performance.

Model : VF900-Cu

(English version)

Ultra Quiet Heatpipe VGA Cooler

http://www.zalman.co.kr http://www.zalmanusa.com

※

The specifications of any product may change without prior notice to improve performance.

Cautions on Use and Installation

1. By installing this product on a VGA (Video Graphics Array) card, a PCI slot adjacent to the PCIe

(or AGP) slot will become unusable.

2. If this product will be installed on a recently released VGA card, please check for compatibility at

Zalman’s website first.

3. The product cannot be installed on Matrox VGA cards, NVIDIA PCX 5 , NVIDIA Geforce 6600

AGP Series and ATI Radeon 9550/9600 Series.

4. If the VGA card and its components interfere with the installation of this product, stop the installation,

refer to the list of compatible VGA cards at Zalman’s website and install this product with one of

the compatible VGA cards.

5. The use of an exhaust fan positioned on the rear side of the case is recommended for enhancement

of product performance.

Product Features

Pure copper heatsink base and fins maximize cooling performance.

2. Use of two high performance heatpipes maximizes heat transfer.

3. Circular heatsink formed by radially aligned ultra-thin(0.2mm) fins minimizes airflow resistance

and maximizes heat dissipation surface area for excellent cooling performance.

Fan installed in the heatsink cools not only the VGA chipset and VGA RAM, but all other VGA components.

5. Does not exert any excessive force on the VGA card due to the product’s light weight.

6. Improvement in the installation structure provides excellent compatibility and easy installation.

Adjustable fan speed controller(FAN MATE 2) enables control of noise and fan speed.

8. Does not generate noise or vibration in Silent Mode.

Disclaimer

Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not

limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper

installation, or improper testing.

❶

One (1) VGA Cooler

❷

Eight (8) RAM Heatsinks

❸

Four (4) Nipples

❹

Four (4) Fixing Nuts

❺

One (1) PVC Washer Plate

❻

Four (4) Rubber Rings

❼

Four (4) Springs

❽

Thermal Grease

❾

FAN Controller(FAN MATE 2)

❿

Cable for FAN MATE 2

󱆌

Dual-sided Tape

(to attach FAN MATE 2)

󱆍

Manual

Components

***

MODEL

SPEC.

96 (L) X 96 (W) X 30 (H)

185

Pure copper

Dimensions (mm)

Weight (g)

Cooling Material

1. VGA Cooler

VF900-Cu

2. Fan

Size : 80(L) x 80(W) x 15(H)mm

- Bearing Type : 2-Ball Bearing

- Speed : 1,350rpm

10 % (Silent Mode)

2,400rpm

10 %

(Normal Mode)

- Noise level : 18.5dB

10 % (Silent Mode)

25.0dB

10 %

(Normal Mode)

Specifications

※

The specifications of any product may change without prior notice to improve performance.

Exploded View

VGA Cooler

VGA RAM

RAM Heatsink

Nipple

Rubber Ring

VGA Chipset

PVC Washer

Spring

Fixing Nut

※

The specifications of any product may change without prior notice to improve performance.

Installation Procedure

Nipple Installation Holes for

Various VGA Cards

※※The following installation sequence MUST be followed.

( VGA RAM Heatsink Attachment →→Thermal Grease Application →→Nipple Installation on the

Retention Guide →→VGA Cooler Installation →→Spring Insertion on the Fixing Nut →→Fixing Nut

Assembly on VGA Cooler’s Nipple →→VGA Card Installation →→Fan Power Cable Connection)

1. VGA RAM Heatsink Attachment

Remove the film from the thermal tapes on the bottom of the

RAM Heatsinks and attach the heatsinks on the VGA RAM.

2. Thermal Grease Application

Clean the contact surface of the VGA Chipset

completely. Apply Thermal Grease on the VGA

Chipset that makes contact with the base of the

VGA Cooler.

3. Nipple Installation on the Retention Guide

Install the short end of the Nipples on the VGA

Cooler's Retention Guide after determining the

appropriate Nipple Installation Holes.

Note 1)

If Thermal Grease or other residue remains on the

RAM, the Thermal Tapes will not stick. Clean the

surface of the RAM with acetone or alcohol before

attaching.

Note 2)

The bonding strength of the Thermal Tapes reaches

90% after 24 hours of curing. Do not exert excessive

force on the RAM Heatsinks during this period.

Note 3)

Thermal Tapes are not reusable because they lose

adhesiveness after their initial attachment. Purchase

new Thermal Tapes if you need to reattach the RAM

Heatsinks.

(Note)

The Nipples MUST be tightened by hand. Using tools

to tighten the Nipples may damage the tips of the Nipples.

※※Please check the table below to identify the correct

Nipple Installation Holes for specific models of

VGA cards.

VGA RAM

RAM Heatsink

Thermal

Tape

Film

Thermal

Grease

VGA Chipset

Nipple

Retention

Guide

VGA Cooler

Retention Guide

Nipple

Installation

Holes

Nipple Installation Holes VGA Card

ATI X1600 Series

ATI X1300 Series

ATI Radeon 9 Series

(except 9550/9600)

ATI Radeon X Series

NVIDIA Geforce4 MX Series

NVIDIA Geforce FX 5200

NVIDIA Geforce FX 5500

NVIDIA Geforce FX 5600(FX 5700)

NVIDIA Geforce 6600 Series

(except 6600 AGP Series)

NVIDIA Geforce4 TI 4 Series

NVIDIA Geforce FX 5700(Ultra) Series

NVIDIA Geforce FX 5800 Series

NVIDIA Geforce 6600 Series

(except 6600 AGP Series)

ATI X1600 Series

NVIDIA Geforce 6600 Series

(except 6600 AGP Series)

NVIDIA Geforce FX 5900 Series

NVIDIA Geforce FX 5950 Series

ATI X1900 Series

ATI X1800 Series

NVIDIA Geforce 7900 Series

NVIDIA Geforce 7800 Series

NVIDIA Geforce 6800 Series

❶

❷

❸

❹

❺

***

※

The specifications of any product may change without prior notice to improve performance.

4. VGA Cooler Installation

①Insert the Rubber Rings into the VGA cooler’s Nipple.

②Install the Nipple-attached VGA cooler on the VGA card’s Mounting Holes.

※The VGA Chipset MUST be positioned on the center of the VGA Cooler’s base.

③Simultaneously hold the VGA Cooler and the VGA card with one hand, then flip the VGA card

so that its rear-side is facing upwards.

(Note)

Make sure that the VGA Chipset and the VGA Cooler’s base do not get disconnected while simultaneously

flipping the VGA Cooler and the VGA card.

5. Spring Insertion on the Fixing Nut

Slowly turn the Spring in countclockwise motion so

that the Spring is correctly attached to the Fixing Nut.

Note 1)

The ends of the Springs are of different diameters. Install

the Spring end with the shorter diameter on the Fixing Nut.

Note 2)

Make sure that the Spring is installed perpendicularly and

not leaning to one side.

VGA Cooler

Nipple

Rubber Ring

Nipple

Rubber Ring

Mounting Hole

VGA Chipset

Nipple

VGA Cooler

Spring

Fixing

Nut

※

The specifications of any product may change without prior notice to improve performance.

6. Fixing Nut Installation on the Nipples

①Place a PVC Washer over each Nipple.

②Slightly screw each of the four Spring-attached-Fixing Nuts onto each Nipple, then tighten

each Fixing Nut one rotation at a time until all are completely tightened.

8. Fan Power Cable Connection (FAN MATE 2 connection)

7. VGA Card Installation

nsert the assembled VGA card into the motherboard’s

PCIe (or AGP) slot. Use the

Fixing Bolt to secure the

VGA card onto the

computer case. If the VGA card

has a power connector on

it, remember to plug in the

power cable.

Note 1)

Fully tightening one Fixing Nut at a time may result

in damaging the VGA chipset. Please tighten each

Fixing Nut one rotation at a time until all are

completely tightened.

Note 2)

Make sure that the VGA Cooler’s base and the

VGA Chipset are completely in contact with each

other.

Note 3)

Make sure that the VGA Cooler does not interfere

with the VGA card's capacitors and other components.

PCIe

Slot

Fixing

Bolt

Nipple

Fixing Nut

PVC Washer

VGA Cooler

①①

Installing FAN MATE 2 on the Inside of the System

②②

Installing FAN MATE 2 on the Outside of the System

Connect the appropriate 3-pin connector on the

cable to the motherboard fan header and the

VF900-Cu fan connector.

Pull the 6-pin connector out of the system

through the back and connect it to FAN MATE 2,

which should be installed on the case using the

included double-sided tape (⑪).

◆When the RPM control knob on FAN MATE 2 is turned fully counter-clockwise, the fan operates in

Silent Mode. Turned fully clockwise, it operates in Normal Mode. You can select the desired fan RPM

by turning the knob.

※※

Performance can be increased by adjusting the RPM control knob of the FAN MATE 2.

Note) FAN MATE 2 has been specifically designed for the fan of this product.

Zalman Tech Co., Ltd. is not responsible for any damage to systems or VGA Chipsets caused by

using it with other types of fans.

RPM Control Knob

Fan Connector

(VF900-Cu)

Motherboard

Double - sided Tape

FAN MATE 2

6-Pin Connector

※

The specifications of any product may change without prior notice to improve performance.

When building a noiseless computer, use Zalman’s Ultra Quiet CPU Cooler, Noiseless Power

Supply, Heatpipe HDD Cooler, Fanless Northbridge Cooler and Noiseless Case Fan for more stable

performance and a noiseless environment.

Zalman Computer Noise Prevention Systems

Home Theater PC Enclosures

TNN Computer Enclosures are the world’s first environment-friendly noiseless computer enclosures

that operate without the use of a fan. TNN Computer Enclosures use the aluminum enclosure itself

as a heatsink. They are ideal for environments that require silence, as well as for home theatre

systems and multi-media systems.

The HD160 is designed for ultra quiet home theatre

PC operation, utilizing optimized ventilation and

anti-vibration reinforcements, making it ideal for

environments that require silence such as living

rooms, bedrooms, educational facilities, and offices.

For more information, please visit our website.

TNN (Totally No Noise) Computer Enclosures

Noiseless Power Supply Heatpipe HDD Cooler

Ultra Quiet CPU Cooler

Fanless Northbridge Cooler Noiseless Case FAN

TNN 300 TNN 500 AF

HD 160

Indice

Altri manuali ZALMAN Hardware per computer

ZALMAN

ZALMAN CNPS10X Quiet Manuale utente

ZALMAN

ZALMAN CNPS10X Flex Manuale utente

ZALMAN

ZALMAN ZM-RF1 Manuale utente

ZALMAN

ZALMAN CNPS9500 AT Manuale utente

ZALMAN

ZALMAN ZM80D-HP Manuale utente

ZALMAN

ZALMAN CNPS7000A Series Manuale utente

ZALMAN

ZALMAN CNPS 7600 Manuale utente

ZALMAN

ZALMAN ZM-GWB2 Manuale utente

ZALMAN

ZALMAN ZM80C-HP Manuale utente

ZALMAN

ZALMAN Z9 series Manuale utente

ZALMAN

ZALMAN CNPS20X Manuale utente

ZALMAN

ZALMAN CNPS7000C-Cu Manuale utente

ZALMAN

ZALMAN CNPS12X Manuale utente

ZALMAN

ZALMAN RESERATOR 1 Manuale utente

ZALMAN

ZALMAN ZM-GWB3 Manuale utente

ZALMAN

ZALMAN CNPS8700 NT Manuale utente

ZALMAN

ZALMAN CNPS7000B Series Manuale utente

ZALMAN

ZALMAN CNPS9500 AT Manuale utente

ZALMAN

ZALMAN CNPS7000B Series Manuale utente

ZALMAN

ZALMAN CNPS8900 Series Manuale utente

ZALMAN

ZALMAN ZM-WB3 Gold Manuale utente

ZALMAN

ZALMAN FX100 Manuale utente

ZALMAN

ZALMAN CNPS2005-Plus Manuale utente

ZALMAN

ZALMAN CNPS9700 LED Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente