ZALMAN CNPS7X Manuale utente
User’s Manual
CNPS7X
www.ZALMAN.com
V 1.1
To ensure safe and easy installation,
please read the following precautions
Intel Socket 1155 / 1156 / 1366 / 775 CPU
Core i7 Extreme
Core i7
Core i5
Core i3
Core 2 Extreme
Core 2 Quad
Core 2 Duo
Dual Core Pentium
Pentium D
Pentium 4
Celeron D
AMD Socket AM3 / AM2+ / AM2 CPU
Phenom II
Phenom
Athlon II
Athlon X2
Athlon FX
Athlon
Opteron
Dual-Core Opteron
Sempron
1
.COM
1. Precautions
2. Specifications
CNPS7X Performa CNPS7X LED
Material Pure Copper and Aluminum
Weight 360g
Dimensions 90(L) Ⅹ 127(W) Ⅹ 135(H)㎜
Fan
Bearing-Type Long Life Bearing
RPM 1,700 ~ 2,350rpm ± 10% 1,500 ~ 1,950rpm ± 10%
Noise Level 22 ~ 33dBA ± 15% 20 ~ 25dBA ± 15%
RPM [w/ Register] 1,350 ~ 1,700rpm ± 10% 1,250 ~ 1,500rpm ± 10%
Noise Level
[w/ Register] 18 ~ 22dBA ± 15% 17 ~ 20dBA ± 15%
Input Voltage 12V
Function PWM Control, Auto Restart
1) Avoid inserting objects or hands into the fan while it is in operation
to prevent product damage and injuries.
2) Do not ingest the Thermal Grease, and avoid its contact with skin
and eyes. If contact is made with skin, wash off with water. If
ingested or irritation persists, seek medical attention.
3) To prevent possible injuries, gloves must be worn while handling this
product.
4) Excessive force exerted on the fan may cause damage to the fan
and/ or system.
5) Use and keep product away from reach of children.
6) Check the components list and condition of the product before
installation. If any problem is found, contact the retailer to obtain a
replacement.
7) During transportation of the system, the cooler must be removed.
Zalman is not responsible for any damages that occur during the
transport of a system.
8) Product design and specifications may be revised to improve quality
and performance.
9) Enable PWM function in BIOS settings after installation.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due
to external causes, including but not limited to, improper use,
problems with electrical power, accident, neglect, alteration,
repair, improper installation, or improper testing.
2
.COM
4. Installation Requirements
3. Components
100㎜
135㎜
140㎜
User’s Manual Thermal Grease Resistor Cable
A-type Clip Support
& Pushpins
[For LGA 1155 / 1156 / 775]
B-type Clip Support
& Pushpins
[For LGA 1366]
Cooler
Thermal Grease
1) Space Requirements
2) Air Guide Removal
The cooler’s installation requires an unobstructed space of 135㎜
(width), 100㎜(length), and 140㎜(height), with the CPU as a central
reference point. Please check if components such as ODDs and PSU
protrude into the required space.
Air guides on enclosures must be removed before the cooler’s
installation since they protrude into the cooler’s required space.
3
.COM
1) Intel Socket 1155 / 1156 / 775 / 1366 Installation
①-ⓐ A-type Clip Support Installation(Socket 1155/1156/775)
Align the A-type Clip Support’s lever with the socket type and
fasten to the motherboard with pushpins.
5. Installation
3) Cooler Orientation
As shown in the diagram below,
it is recommended that the
cooler be installed so that air
flows from the cooler toward the
enclosure’s rear exhaust fan to
be released.
※ Recommended cooler
orientation may differ
according to the motherboard
model.
Socket 775
Socket 1155 / 1156
M/B
4
.COM
② Clear off any particles
or residue from the CPU’
s surface. Then spread a
thorough layer of Thermal
Grease on the CPU and the
base of the cooler.
①-ⓑ B-type Clip Support Installation(Socket 1366)
Fasten the B-type Clip Support to the motherboard with pushpins.
M/B
③ Completely unfasten the 2 bolts already assembled on the clip and adjust the
position to fit the Intel socket.
Socket 1155 / 1156 / 775
Socket 1366
5
.COM
④ Install the cooler on the Clip support as shown in the picture and connect
the lug slot of the clip on to the lug on the clip support. Then fasten the
bolts on each side a few turns at a time.
⑤ Connect the cooler’s 4-pin connector to the motherboard’s CPU Fan Header.
When reassembling the bolt, be sure
to assemble only half way of the total
length.
Tip
<Performance Mode> <Low-Noise Mode>
Fan RPM resistor
M/B
M/B
6
.COM
2)
AMD Socket AM3 / AM2+ / AM2 Installation
① Clear off any particles or residue from the CPU’s surface. Then spread a
thorough layer of Thermal Grease on the CPU and the base of the cooler.
② Completely unfasten the 2 bolts already assembled on the clip and adjust
the position to fit the AMD socket.
③ Install the cooler on the Clip support as shown in the picture and connect
the lug slot of the clip on to the lug on the clip support. Then fasten the
bolts on each side a few turns at a time.
Socket AM3 / AM2+ / AM2
When reassembling the bolt, be sure
to assemble only half way of the total
length.
Tip
7
.COM
④ Connect the cooler’s 4-pin connector to the motherboard’s CPU Fan header.
<Performance Mode> <Low-Noise Mode>
Fan RPM resistor
M/B
M/B
Indice
Altri manuali ZALMAN Hardware per computer
ZALMAN
ZALMAN CNPS 7600 Manuale utente
ZALMAN
ZALMAN CNPS7000C-Cu Manuale utente
ZALMAN
ZALMAN ZM80C-HP Manuale utente
ZALMAN
ZALMAN ZM-RF1 Manuale utente
ZALMAN
ZALMAN CNPS9500 AT Manuale utente
ZALMAN
ZALMAN CNPS5100-Al Manuale utente
ZALMAN
ZALMAN CNPS9700 LED Manuale utente
ZALMAN
ZALMAN CNPS9900 Max Manuale utente
ZALMAN
ZALMAN CNPS7500-Cu LED Manuale utente
ZALMAN
ZALMAN CNPS9700 LED Manuale utente
ZALMAN
ZALMAN CNPS9500 AM2 Manuale utente
ZALMAN
ZALMAN FC-ZV9 Manuale utente
ZALMAN
ZALMAN RESERATOR1 V2 Guida rapida
ZALMAN
ZALMAN CNPS9900 Max Manuale utente
ZALMAN
ZALMAN CNPS7000C-Cu/AICu Manuale utente
ZALMAN
ZALMAN MS800 Manuale utente
ZALMAN
ZALMAN OPTIMA II CNPS10X Manuale utente
ZALMAN
ZALMAN CNPS8000B Manuale utente
ZALMAN
ZALMAN Optima CNPS8X Manuale utente
ZALMAN
ZALMAN CNPS2005-Plus Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
