ZKTeco FA50 Manuale utente

Installation Guide

FA50

Version: 1.0

Due to regular system upgrades and products, ZKTeco could not guarantee exact consistency between

the actual product and the written information in this manual.

- 1 -

Operation Instructions

1.

Figure 1-1

1. The device has two USB plugs, as shown in the below Figure 1-1.

Insert the USB cable "A" of FA50M into the USB port situated on the

host’s back, as shown in Figure 1-2.

Figure 1-2

- 2 -

2. Right-click on My Computer > Properties > Device Manager.

As shown in the figure below, if "Imaging devices" and "libusb-win32

Usb Devices" appear, users can continue using the same device. But

if "Imaging devices" and "libusb-win32 Usb Devices" did not appear,

it means that the device did not get connected appropriately.

Note: Generally, it is due to the insufficient power supply of the USB.

Just insert the USB cable "B" into the USB port of the host.

Figure 1-3

- 3 -

Steps to Run Demo for the First Time on Windows

2.

Double-click and open the "FA50 Demo" file, then click "FA50M

InstallDriver" to install the driver, as shown in Figure 2-1.

Driver Installation

Figure 2-1

- 4 -

On the Installation window, click "Next", as shown in Figure 2-2.

Figure 2-2

Then click "Finish" to successfully install the driver.

Figure 2-3

Demo Test Process

3.

1. Double-click and open the "FA50 Demo" file, and then open the

Demo Test software, as shown in Figure 3-1.

Figure 3-1

2. On the Demo Test software, firstly click "Open" to open the UVC

camera. The camera gets opened successfully only if "Camera

opened" gets displayed. Then the camera successfully captures the

image and displays it, as shown in Figure 3-2.

Figure 3-2

- 5 -

Secondly, as shown in Figure 3-3, click "Open" to open HID, and "HID

ope ned " wil l g et displayed, w hic h m ean s the HID ope ned

successfully.

Figure 3-3

3. Next, enter the registrant ID in the "User ID" field, then aim your

face at the camera, and click "Add User" to register the user ID.

And as shown in Figure 3-4, if "Add User successfully" appears, it

means that the user ID is successfully registered.

- 6 -

Figure 3-4

Click "Enroll face" to register face, and if "Enroll face successfully"

gets displayed, it means that face registration is successful.

Figure 3-5

As shown in Figure 3-6, the software displays the recognized

registration ID's username, and thus the recognition process is

complete.

Figure 3-6

- 7 -

To clear the user, click the "Clear User" button, and if " Clear User

successfully" gets displayed, it means that the user removal is

successful.

Figure 3-7

Precautions

4.

1. If the registration gets failed, click "Clear User" to clear the user

and register again.

- 8 -

Figure 4-1

- 9 -

2. When clicking "Open" to open HID, and if "No device found" gets

displayed, carry out the following solutions.

Insufficient power supply, plug in two USB ports.

The driver did not get installed successfully, repeat the steps of the

driver installation process.

Figure 4-2

Indice

Altri manuali ZKTeco Controllori di accesso IP

ZKTeco

ZKTeco MultiBio 700 Manuale utente

ZKTeco

ZKTeco F18 Manuale utente

ZKTeco

ZKTeco ProBio Manuale utente

ZKTeco

ZKTeco Horus Manuale utente

ZKTeco

ZKTeco Green Label ProFace X Manuale utente

ZKTeco

ZKTeco MA500 Guida alla risoluzione dei problemi

ZKTeco

ZKTeco G4 Manuale utente

ZKTeco

ZKTeco BioPro SA20 Manuale utente

ZKTeco

ZKTeco OP-200 Manuale utente

ZKTeco

ZKTeco BR1200 Series Manuale utente

ZKTeco

ZKTeco PA10 Manuale utente

ZKTeco

ZKTeco ProMA Series Manuale utente

ZKTeco

ZKTeco RevFace15 Manuale utente

ZKTeco

ZKTeco F6 Manuale utente

ZKTeco

ZKTeco X7 Manuale utente

ZKTeco

ZKTeco ProCapture-WP Manuale utente

ZKTeco

ZKTeco G4[QR] Manuale utente

ZKTeco

ZKTeco SpeedFace-V3L Manuale utente

ZKTeco

ZKTeco Aurora T1 Manuale utente

ZKTeco

ZKTeco MiniAC Plus Manuale utente

ZKTeco

ZKTeco ZPad Plus Manuale utente

ZKTeco

ZKTeco SpeedFace-V3L Manuale utente

ZKTeco

ZKTeco SA40 Manuale utente

ZKTeco

ZKTeco SpeedFace-V5L Manuale utente

Manuali Controllori di accesso IP popolari di altre marche

Jantar

Jantar REX A-1-9 Manuale utente

2N

2N Access Unit Foglio di istruzioni

Kedacom

Kedacom KSCA120 Series Manuale utente

H3C

H3C WX2880X Manuale utente

G4S

G4S S870-EX Guida

PRASTEL

PRASTEL M2000PE Manuale utente

Allegion

Allegion interflex IF-281 Cylinder Manuale utente

TECOM

TECOM TS1067E Manuale utente

Fermax

Fermax Memokey 100C Guida utente

Fermax

Fermax CITYLINE MEMOKEY Manuale di istruzioni

Software House

Software House iSTAR Pro 2U RM Manuale di istruzioni

AKCP

AKCP SP+ Manuale utente

Bpt

Bpt HNA/102 Manuale utente

Civintec

Civintec CV9601T-T-1F Manuale utente

BioMax

BioMax N-X90W Manuale utente

FingerTec

FingerTec s-Kadex Manuale utente

H3C

H3C WX5002ACCESSCONTROLLER Manuale utente

C Prox Ltd

C Prox Ltd DPN-2 Manuale utente