ZKTeco KF1000-U Manuale utente
KF1000-U Facial Recognition Extension Reader User Manual
P a g e |1Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Thank you for choosing our product. Please read the instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposes only.
For further details, please visit our Company’s website
www.zkteco.com.
KF1000-U Facial Recognition Extension Reader User Manual
P a g e |1Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Copyright © 2023 ZKTECO CO., LTD. All rights reserved.
Without the prior written consent of ZKTeco, no terminalion of this manual can be copied or forwarded
in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the
"Company" or "ZKTeco").
Trademark
is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned
by their respective owners.
Disclaimer
This manual contains information on the operation and maintenance of the ZKTeco equipment. The
copyright in all the documents, drawings, etc. in relation to the ZKTeco supplied equipment vests in
and is the property of ZKTeco. The contents hereof should not be used or shared by the receiver with
any third party without the express written permission of ZKTeco.
The contents of this manual must be read as a whole before starting the operation and maintenance of
the supplied equipment. If any of the content(s) of the manual seems unclear or incomplete, please
contact ZKTeco before starting the operation and maintenance of the said equipment.
It is an essential pre-requisite for the satisfactory operation and maintenance that the operating and
maintenance personnel are fully familiar with the design and that the said personnel have received
thorough training in operating and maintaining the machine/unit/equipment. It is further essential for
the safe operation of the machine/unit/equipment that personnel has read, understood and followed
the safety instructions contained in the manual.
In case of any conflict between terms and conditions of this manual and the contract specifications,
drawings, instruction sheets or any other contract-related documents, the contract conditions/
documents shall prevail. The contract specific conditions/documents shall apply in priority.
ZKTeco offers no warranty, guarantee or representation regarding the completeness of any
information contained in this manual or any of the amendments made thereto. ZKTeco does not
extend the warranty of any kind, including, without limitation, any warranty of design, merchantability
or fitness for a particular purpose.
ZKTeco does not assume responsibility for any errors or omissions in the information or documents
which are referenced by or linked to this manual. The entire risk as to the results and performance
obtained from using the information is assumed by the user.
ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential,
indirect, special, or exemplary damages, including, without limitation, loss of business, loss of profits,
business interruption, loss of business information or any pecuniary loss, arising out of, in connection
with, or relating to the use of the information contained in or referenced by this manual, even if
ZKTeco has been advised of the possibility of such damages.
This manual and the information contained therein may include technical, other inaccuracies or
typographical errors. ZKTeco periodically changes the information herein which will be incorporated
into new additions/amendments to the manual. ZKTeco reserves the right to add, delete, amend or
modify the information contained in the manual from time to time in the form of circulars, letters,
notes, etc. for better operation and safety of the machine/unit/equipment. The said additions or
KF1000-U Facial Recognition Extension Reader User Manual
P a g e |2Copyright©2023 ZKTECO CO., LTD. All rights reserved.
amendments are meant for improvement /better operations of the machine/unit/equipment and such
amendments shall not give any right to claim any compensation or damages under any circumstances.
ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment malfunctions due to any
non-compliance of the instructions contained in this manual (ii) in case of operation of the
machine/unit/equipment beyond the rate limits (iii) in case of operation of the machine and
equipment in conditions different from the prescribed conditions of the manual.
The product will be updated from time to time without prior notice. The latest operation procedures
and relevant documents are available on http://www.zkteco.com.
If there is any issue related to the product, please contact us.
ZKTeco Headquarters
Address ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone +86 769 - 82109991
Fax +86 755 - 89602394
For business-related queries, please write to us at sales@zkteco.com.
To know more about our global branches, visit www.zkteco.com.
KF1000-U Facial Recognition Extension Reader User Manual
P a g e |3Copyright©2023 ZKTECO CO., LTD. All rights reserved.
About the Company
ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-
vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial
Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate
controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
Our security solutions are multi-lingual and localized in over 18 different languages. At the ZKTeco
state-of-the-art 700,000 square foot ISO9001-certified manufacturing facility, we control manufacturing,
product design, component assembly, and logistics/shipping, all under one roof.
The founders of ZKTeco have been determined for independent research and development of
biometric verification procedures and the productization of biometric verification SDK, which was
initially widely applied in PC security and identity authentication fields. With the continuous
enhancement of the development and plenty of market applications, the team has gradually
constructed an identity authentication ecosystem and smart security ecosystem, which are based on
biometric verification techniques. With years of experience in the industrialization of biometric
verifications, ZKTeco was officially established in 2007 and now has been one of the globally leading
enterprises in the biometric verification industry owning various patents and being selected as the
National High-tech Enterprise for 6 consecutive years. Its products are protected by intellectual
property rights.
About the Manual
This manual introduces the operations of KF1000-U Facial Recognition Extension Reader.
All figures displayed are for illustration purposes only. Figures in this manual may not be exactly
consistent with the actual products.
Features and parameters with ★are not available in all devices.
KF1000-U Facial Recognition Extension Reader User Manual
P a g e |4Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Document Conventions
Conventions used in this manual are listed below:
GUI Conventions
For Software
Convention
Description
Bold font
Used to identify software interface names e.g., OK,Confirm,Cancel.
>
Multi-level menus are separated by these brackets. For example, File >
Create > Folder.
For Device
Convention
Description
< >
Button or key names for devices. For example, press <OK>.
[ ]
Window names, menu items, data table, and field names are inside square
brackets. For example, pop up the [New User] window.
/
Multi-level menus are separated by forwarding slashes. For example,
[File/Create/Folder].
Symbols
Convention
Description
This represents a note that needs to pay more attention to.
The general information which helps in performing the operations faster.
The information which is significant.
Care taken to avoid danger or mistakes.
The statement or event that warns of something or that serves as a cautionary
example.
KF1000-U Facial Recognition Extension Reader User Manual
P a g e |5Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Table of Contents
1 OVERVIEW............................................................................................................................................ 6
1.1 INTRODUCTION ............................................................................................................................................ 6
1.2 FEATURES .................................................................................................................................................... 6
1.3 APPEARANCE ............................................................................................................................................... 6
2 INSTALLATION SET-UP........................................................................................................................ 7
3 CONNECTING THE ALL-IN-ONE ........................................................................................................... 8
4 VERIFICATION MODE........................................................................................................................... 9
4.1 FACIAL VERIFICATION ...................................................................................................................................9
4.2 CARD VERIFICATION .................................................................................................................................. 11
APPENDIX 1 PRIVACY POLICY .............................................................................................................13
APPENDIX 2 ECO-FRIENDLY OPERATION...........................................................................................15
KF1000-U Facial Recognition Extension Reader User Manual
P a g e |6Copyright©2023 ZKTECO CO., LTD. All rights reserved.
1Overview
1.1 Introduction
ZKTeco has launched a new facial recognition extension reader called KF1000-U, which works with the
SpeedFace-V3L access control device. With USB 2.0 (Type A) communication, KF1000-U can capture
face templates and send the data via USB to the access control host for facial recognition. Additionally,
users can use KF1000-U on their desktop as a USB face template collector with software for face
template acquisition.
1.2 Features
Multiple verification methods: Face / Card
Optional card modules: 125kHz ID Card / 13.56MHz IC Card
Communication: USB 2.0 (Type A)
Operating Temperature: -10°C - 50°C
1-megapixel monocular camera, 720p pixels, field of viewing angle 98°
1.3 Appearance
KF1000-U Facial Recognition Extension Reader User Manual
P a g e |7Copyright©2023 ZKTECO CO., LTD. All rights reserved.
2Installation Set-up
Make sure that the device is installed as per the installation instructions. Otherwise, you will bear any
consequence resulting from your actions.
Install on the wall
Step 1: Drill two mounting holes at suitable locations on the wall. The recommended installation
height of the camera from the ground is 1.5 meters, which can be adjusted appropriately
according to actual needs.
Step 2: Secure the back plate on the wall with the wall mounting screws.
Step 3: After passing the wires through the wiring hole and connecting them to the device, and then
attach the device to the back plate from top to bottom.
Step 4: Fasten the device to the back plate with a security screw.
KF1000-U Facial Recognition Extension Reader User Manual
P a g e |8Copyright©2023 ZKTECO CO., LTD. All rights reserved.
3Connecting the All-in-One
The KF1000-U USB facial recognition extension reader needs to be used with the SpeedFace-V3L all-in-
one access control device. The extension reader captures face templates and outputs them via USB to
the SpeedFace-V3L for facial recognition. It is also possible to capture a face templates or register a
card number on the SpeedFace-V3L and then perform face verification or card verification on the
KF1000-U.
1. KF1000-U USB facial recognition extension reader's USB interface is a standard USB 2.0 (Type A)
interface with power supply function, the host can power it.
2. The all-in-one machine can receive the facial image delivered by the reader for facial recognition
and return the verification result to the reader.
3. Once the user has registered at the all-in-one machine, then face and card verification can be
performed on the reader.
KF1000-U Facial Recognition Extension Reader User Manual
P a g e |9Copyright©2023 ZKTECO CO., LTD. All rights reserved.
4Verification Mode
4.1 Facial Verification
1:N Facial Verification Mode
In this verification mode, the face template collected by the reader is compared with all the facial data
registered in the all-in-one. The following is the pop-up prompt of the all-in-one interface and the
status of the reader after a successful comparison result.
After successful verification, the all-in-one prompt box displays "Successfully verified". And the reader
LED lights green and the buzzer sounds once. As shown below:
1:1 Facial Verification Mode
In this verification mode, the face captured by the reader camera is compared with the facial template
related to the entered user ID in the all-in-one. The operation steps are shown below.
1. Press on the main interface of the host and enter the 1:1 facial verification mode.
2. Enter the user ID and click [OK].
Altri manuali per KF1000-U
1
Indice
Altri manuali ZKTeco Sistema RFID
ZKTeco
ZKTeco Green Label G4L Manuale utente
ZKTeco
ZKTeco VT07-B01-W Manuale utente
ZKTeco
ZKTeco FaceKiosk-H13 Manuale utente
ZKTeco
ZKTeco OP-200 Manuale utente
ZKTeco
ZKTeco GL300 Manuale utente
ZKTeco
ZKTeco SpeedFace-V5L-RFID Manuale utente
ZKTeco
ZKTeco SpeedFace-V5L Manuale utente
ZKTeco
ZKTeco SC800 Manuale utente
ZKTeco
ZKTeco TSP-4 Series Manuale utente
ZKTeco
ZKTeco ProlD Series Manuale utente
