Zoom 5510 Manuale utente

Zoom™

ADSL USB MODEM

Installation

Guide

NOTICE

This document contains proprietary information protected by copyright, and

this Manual and all the accompanying hardware, software, and

documentation are copyrighted. All rights are reserved. No part of this

document may be photocopied or reproduced by mechanical, electronic, or

other means in any form.

The manufacturer does not warrant that the hardware will work properly in

all environments and applications, and makes no warranty or representation,

either expressed or implied, with respect to the quality, performance,

merchantability, or fitness for a particular purpose of the software or

documentation. The manufacturer reserves the right to make changes to the

hardware, software, and documentation without obligation to notify any

person or organization of the revision or change.

All brand and product names are the trademarks of their respective owners.

Contents

GETTING STARTED .......................................................... 1

BEFORE YOU BEGIN ................................................................ 1

WHAT YOUR PACKAGE CONTAINS ............................................... 2

SYSTEM REQUIREMENTS ........................................................... 2

IF YOU NEED HELP ................................................................. 2

INSTALLING YOUR ADSL USB MODEM............................ 3

INSTALLING THE DRIVERS ......................................................... 3

CONNECTING THE MODEM ........................................................ 4

CONNECTING TO THE INTERNET ................................................. 5

UNINSTALLING YOUR MODEM .................................................... 6

USING THE CONFIGURATION AND MONITORING

APPLICATION .................................................................. 7

PHYSICAL LINK STATUS & SYSTEM INFORMATION ........................... 7

FREQUENTLY ASKED QUESTIONS ................................. 10

REGULATORY INFORMATION........................................ 11

Getting Started 1

Getting Started

Thank you for purchasing our ADSL USB modem. This

Installation Guide contains everything you need to know to

install and use your new modem.

This Guide is organized as follows:

•Getting Started.

•Installing Your ADSL USB Modem.

•Using the Configuration and Monitoring Application.

•Frequently Asked Questions.

•Regulatory Information.

Before You Begin

Your new ADSL (Asynchronous Digital Subscriber Line) modem

uses the same telephone wiring already in place in your home or

office. However, before you can use any type of DSL modem, you

must make arrangements with a DSL Service Provider. A DSL

service technician may visit you to physically test the wiring for

DSL compatibility. Sometimes, special filtering equipment will

need to be installed in your home or office.

In this guide, we assume you have already done the following:

•Contacted your DSL Service Provider and arranged for DSL

service provisioning.

• Scheduled DSL installation at the site where you will use your

computer and ensured that the DSL service technician labeled

the jacks that can provide DSL access in your home or office.

2 Zoom ADSL USB Modem Installation

What Your Package Contains

In addition to this manual, your package includes the following

items:

•ADSL USB modem.

•RJ-11 telephone cord.

•USB cable.

•Installation software on CD.

You also need the following:

•Telephone jack to plug the modem into.

•Available USB port on your computer.

System Requirements

•Pentium® II IBM PC-compatible with a minimum of 32

megabytes of RAM equipped with a USB port.

•Windows 98 First or Second Edition, Windows 2000, or

Windows Millenium operating system.

If You Need Help

If you need help with your installation, the Zoom Technical

Support Staff will be happy to assist you. Phone (617) 423-1076, e-

mail [email protected], or visit www.zoom.com.

Installing Your ADSL USB Modem 3

Installing your ADSL

USB Modem

Setting up the Zoom ADSL USB modem involves three stages:

•Installing the drivers.

•Connecting the modem to the computer.

•Connecting to the Internet.

This section also includes instructions on how to uninstall your

modem.

Installing the Drivers

The first stage is to install the USB drivers. Follow these steps:

1Insert the supplied CD into your CD-ROM drive. The CD

should auto-run after a few seconds. If it doesn’t, click

Start | Run from the desktop and type e:\setup.exe,

where eis the letter of your CD-ROM drive. Click OK.

2Following the prompts, you’ll see a Welcome screen. Click

Next.

Note: If you are using Windows 2000, you may see the

following screen. You can safely ignore this screen and click

Yes.

4 Zoom ADSL USB Modem Installation

3You’ll see the following Select ISP screen.

Select the entry recommended by your ISP. Note: In most

cases, the Default (0,35) entry will suffice.

Click Next.

4When the process is complete, you will be prompted to

restart your computer. Be sure to remove any floppy

diskettes or CDs.

Connecting the Modem

The next stage, connecting your ADSL USB modem to your

computer, is easy. Follow these steps.

1Plug the rectangular end of the supplied USB cable into the

USB port on your computer.

2Plug the square end of the USB cable into the USB jack on

the back of the modem.

Installing Your ADSL USB Modem 5

3Connect the RJ-11 telephone cord. Plug one end of the

cord into the PHONE jack on the back of the modem.

Plug the other end into a telephone wall jack that has been

wired for DSL service.

Note: At this point, you may be asked for your

computer’s Windows installation CD. If so, insert it into

the CD-ROM drive and click OK.

4Restart your computer.

Connecting to the Internet

After you restart your computer, the modem’s front panel PWR

light emitting diode (LED) will be lit, indicating that the modem is

on. Note: If it isn’t lit, push the switch on the front panel of the

modem. The DATA LED will blink while the modem is

establishing a connection; it will remain “steady on” once it has

made a connection. Once the light remains “steady on,” you’re

done! You can now begin to take advantage of your ADSL

modem’s speed and versatility for connecting to the Internet.

IMPORTANT

The pushbutton switch on the modem’s front

panel turns the LED lights off and on; it does not

control the power to the modem.

6 Zoom ADSL USB Modem Installation

Uninstalling Your Modem

If you ever want to uninstall your ADSL modem, you’ll find the

process is simple. Note: Make sure you first unplug the USB

modem cable from the computer. Then follow these steps:

1Select Start | Programs | DSL Modem Driver.

2Click Uninstall. You’ll see the following screen.

3Click the Remove button. That’s it!

Indice

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Zte

Zte WiMAX Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Zte

Zte MF823 Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente