Zte MF668 Guida all'installazione

Altri manuali per MF668

2

Indice

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente

Zoom

Zoom 1070 Series Manuale utente

Aztech

Aztech HW831 Manuale utente

- 1 -

ZTE

MF668 USB Modem

Quick Start User Guide

www.zte.com.cn

© ZTE Corporation, 2008.

- 2 -

1. Insert the SIM Card into the modem

2. Connect the USB modem to your computer

Before connecting the modem for the first time, uninstall all previous versions of the

software.

Insert the modem into an available port on your computer. Alternatively, you may use

the supplied USB cable to connect the modem to the computer. In most cases the

single cable should suffice. However, to increase the power delivered to the modem,

use the double USB cable if required.

After the modem is connected, your computer will automatically launch Autorun, the

installation application software.

Note: If your security settings prevent Autorun from starting automatically, you will

The SIM slot is located at the rear end

of the device under a slide out cap

Before using the modem make sure the SIM

card supports data services. Insert the SIM

card as shown with the gold contacts facing

down and the beveled edge facing outwards of

the device.

Push the SIM card in as far as it will go.

- 3 -

have to start the process manually. Navigate to the CDROM and double click the

Autorun.exe file to start the software installation.

3. First Time Software Installation

Select your language and click OK.

- 4 -

First Time Software Installation Continued…

Click Next to continue.

- 5 -

First Time Software Installation Continued…

Read the license agreement, select I accept the terms of the license agreement

and press Next.

- 6 -

First Time Software Installation Continued…

Click Next to accept the default installation location or press Change to specify your

preferred path.

- 7 -

First Time Software Installation Continued…

The wizard will take a few minutes to install software. Click Finish to complete.

- 8 -

4. Using your Modem

Insert your modem into an available USB port on your computer. Your computer will

launch the Connection Manager application automatically. The modem will initialize

and the main user interface will appear as illustrated below.

- 9 -

Using your Modem Continued…

Click the Internet button and then click Connect to establish a connection to the

internet.

5. Removing the Modem Safely

Please close the application software first, use the Safe Hardware Removal

procedure and then pull out the modem or USB cable from the computer.

- 10 -

6. LED Indicator

7. Functions & Operation

Connects to the internet.

Messages Interface

View your Contacts

Opens the Rogers Home Page

Change system settings

View the Help file

LED Indicator USB Modem Working Status

Yellow Power on. Not registered on the 2G or 3G network

Green Solid Registered on the 2G network.

Green blinking Active data transfer on the 2G network

Blue solid Registered on the 3G network.

Blue blinking Active data transfer on the 3G network.

Red solid Roaming status or no SIM card

Red blinking Active data transfer in roaming status