Zte MF79U Manuale utente
1
MF79U
Quick Start Guide
ZTE CORPORATION
NO. 55, Hi-tech Road South, Shenzhen, P.R.China
Postcode: 518057
2
Getting to Know Your Device
Appearance
The following figure is for your reference only.
1. Device cap
2. Front cover
3. Indicator light
4. Reset hole
Press and hold for about 3 seconds to restore your device.
5. micro-SIM card slot
6. microSDHC™ card slot
7. USB connector
3
NOTE:
microSDHC logo is a trademark of SD-3C, LLC.
Getting to Know Your Device
Indicator Light
Indicator Status Description
Red
The device is in error status.
The device is not
registered to the mobile
network.
There is no micro-SIM
card inserted.
There is no network
service available.
Green
solid
The device is registered to
the 2G/3G mobile network.
Green
blinking
The device is connected to
the 2G/3G mobile network
and data is being
4
transferred.
Blue solid
The device is registered to
the 4G//LTE network.
Blue
blinking
The device is connected to
the 4G/LTE network and
data is being transferred.
Blue
blinking
WPS is active.
Blue solid Wi-Fi is active.
LED off Wi-Fi is off.
5
Getting to Know Your Device
Connection Scenarios
The device uses your micro-SIM card to access the Internet. It
allows multiple clients to surf on the Internet at the same time.
The following figure is for your reference only.
6
Installing Your Device
1. Open the front cover.
2. Install a micro-SIM card to the micro-SIM card slot.
WARNING!
Your modem does not support SIM cards and nano-SIM cards.
To avoid damage to the modem, do not use those cards or any
card holders.
7
3. Install a microSDHC card to the microSDHC card slot.
4. Close the front cover.
8
9
Connecting to Your Device
Using USB Connector
Insert the device into your computer’s USB port securely. The
operating system automatically detects and identifies your device
and starts the installation wizard.
NOTE:
If the system does not automatically launch installation, you can
click the device installation icon in My Computer > ZTEMODEM
to install the software.
The 4G Mobile Hotspot configuration page will open
automatically, and then your computer will connect to your device
successfully.
Using Wi-Fi
1. Supply power to your device by connecting to your computer
or using other accessories.
2. Ensure that your computer or other client devices have
enabled Wi-Fi, and search for available wireless networks.
NOTE:
Refer to your Wi-Fi-enabled client device manual for further
details on how to search for wireless networks. If you use a
computer, you need to set your computer to obtain an IP address
10
automatically.
3. Select the Wi-Fi name (SSID) of your device, and click
Connect.
4. Enter the Wi-Fi password if necessary, and click OK.
NOTE:
Refer to the chapter Getting to Know the Wi-Fi SSID and
Password to get the default Wi-Fi SSID and password.
5. Wait until the client device is connected to your device
successfully.
Altri manuali per MF79U
2
Indice
Altri manuali Zte Modem
Zte
Zte ZXHN H108N Manuale utente
Zte
Zte K3570-Z Manuale utente
Zte
Zte SKINNY DONGLE Manuale utente
Zte
Zte MF636 Manuale utente
Zte
Zte Mblaze Ultra Wi-Fi Manuale utente
Zte
Zte MF823 Manuale utente
Zte
Zte Diamond MF820D Manuale dell'operatore
Zte
Zte MF605 Manuale utente
Zte
Zte MF920VS Manuale utente
Zte
Zte MF667 Manuale utente
Manuali Modem popolari di altre marche
Davicom
Davicom DM562AP Manuale utente
EpiValley
EpiValley TATA indicom SXC-1080 Manuale utente
Intelimax
Intelimax MA-2060 Manuale utente
SMC Networks
SMC Networks D3CM1604V Manuale per l'uso e la cura
Telstra
Telstra Wi-Fi 4G Advanced Pro X Manuale utente
Thrane&Thrane
Thrane&Thrane imarsat EXPLORER 300 Manuale utente
