Zte K4505-Z Manuale utente

Content

1 USB Modem Introduction............................................................... 3

1.1 Introduction.................................................................................. 3

1.2 Safety Warning and Notice......................................................... 3

1.3 RF Safety Information ................................................................. 5

1.4 System Requirements ................................................................. 7

1.5 Technical Specifications ............................................................ 8

2 Installation......................................................................................... 9

2.1 Unpacking.................................................................................... 9

2.2 Software Installation ................................................................... 9

2.2.1 Insert the SIM Card into the Modem .................................... 9

2.2.2 Connecting the Modem and computer ................................ 9

2.2.3 First Time Software Installation ........................................ 10

2.3 Using your Modem .................................................................... 10

2.4 LED Indicator ............................................................................. 11

2.5 Removing the Modem Safely .................................................... 11

2.6 Uninstalling the Software ......................................................... 11

3 Functions & Operation ................................................................. 12

3.1 Main Interface............................................................................ 12

3.2 Task Bar Icons........................................................................... 13

3.3 Connecting to the Internet......................................................... 14

3.4 Text Messages .......................................................................... 15

3.4.1 Read Text Messages ........................................................ 16

3.4.2 Create New Message....................................................... 16

3.4.3 Text Message Interface Guide ......................................... 17

2Content

3.5 Contacts .................................................................................... 17

3.6 Home Page ................................................................................ 18

3.7 Settings ..................................................................................... 18

3.7.1 Connection Settings.......................................................... 18

3.7.2 Security Settings............................................................... 19

3.7.3 Network Settings .............................................................. 19

3.7.4 Message Settings ............................................................. 19

3.7.5 Alert Settings..................................................................... 20

3.7.6 Check for Updates ............................................................ 20

3.8 Help............................................................................................ 20

4 FAQ & Answers.............................................................................. 21

5 Declaration of RoHS Compliance ............................................... 24

Thank you for choosing the K4505-Z USB modem. Please read this

1USBModem Introduction

1.1 Introduction

manual carefully and keep it for future reference.

The pictures, symbols and contents in this manual are for reference

only. They are correct at the time of publication but might not be completely

identical with your modem. We operate a policy of continuous

development. We reserve the right to update the technical specifications

in this document at any time without prior notice.

The HSPA+ modem is a multi-mode 3G high speed modem suitable for

GSM/GPRS/WCDMA/EDGE/HSDPA/HSPA+ networks. It uses the USB 2.

0 standard interface for easy connection to any laptop or desktop

computer. It is compatible with 2G and 3G mobile networks, allowing

connection with wireless data and SMS services to give you high speed

data access wherever you are.

1.2 Safety Warning and Notice

To the owner

•Some electronic devices are susceptible to electromagnetic

interference. The modem is a transmitting device and may cause

interference to sensitive electronic equipment such as audio systems,

vehicle systems and medical equipment. Please consult the

manufacturer of the other device before using the modem.

•Operating of a laptop or desktop computer with the modem may

interfere with medical devices like hearing aids and pacemakers.

Please keep the modem more than 20 centimetres away from such

medical devices. Turn the modem off if necessary. Consult a physician

USB Modem Introduction

4USB Modem Introduction

or the manufacturer of the medical device before using the modem

near such devices.

•Be aware of the regulations when using the modem at places such

as oil warehouses or chemical factories, where there are explosive

gases or explosive products being processed. Turn off your modem

as instructed.

•Don’t touch the antenna area unnecessarily while connected. This

can affect your modem performance and reduce the signal quality.

•Store the modem out of the reach of children. The modem may cause

injury or get damaged.

•The modem contains sensitive electronic circuitry. Do not expose the

modem to any liquids, high temperatures or shock.

•Only use original accessories or accessories that are authorized by

the manufacturer. Using unauthorized accessories may affect your

modem’sperformance, damageyourmodem andviolaterelatednational

regulations.

•Avoid using the modem in areas that emit electromagnetic waves, or

in enclosed metallic structures (eg. elevators).

•The modem is not waterproof. Please keep it dry and store it in a cool,

dry place.

•Don’t use the modem immediately after a sudden temperature change

(eg. from an air conditioned environment to high temperature and

humidity outside). In such cases there could be condensing moisture

inside the modem which can cause internal damage. Unplug the modem

and leave it for 30 minutes before use.

•Always handle the modem with care. Be careful not to drop or bend

the modem.

•There are no user serviceable parts inside the modem. Unauthorised

dismantling or repair of the modem will void the warranty.

1.3 RF Safety Information

The USB Wireless modem is a transmitting device with similar output

power to a mobile phone. It uses an internal antenna to connect to the

mobile network. To get the best performance from your device, do not

cover or shield the device in any way as this will lead to increased

output power. Always leave a clear space around the device to allow

the transmit and receive signals to propagate. It is not intended to be

used as a handheld or body worn device but the SAR tests have been

completed and exceed Canadian and US regulatory requirements.

Radio Frequency Energy

Your handset is a low-power radio transmitter and receiver. When

switched on it intermittently transmits radio frequency (RF) energy (radio

waves). The transmit power level is optimized for best performance and

automatically reduces when there is good quality reception. Maximum

power is only used at the edge of network coverage so under most

circumstances the power output is very low. Under poor network con-

ditions the phone will transmit at a higher power, may get hot and will

have a significantly shorter battery life.

Declaration of Conformity

THISMODELPHONEMEETSTHEGOVERNMENT’SREQUIREMENTSFOR

EXPOSURETORADIOWAVES.

Your wireless phone is a radio transmitter and receiver. It is designed

and manufactured not to exceed the emission limits for exposure to radio

frequency (RF) energy set by the Federal Communications Commission

of the U.S Government. These limits are part of comprehensive guide-

lines and establish permitted levels of RF energy for the general

USB Modem Introduction

when worn on the body, are 1.14W/kg

The highest SAR values, as reported to the FCC for this USB dongle

population. The guidelines are based on standards that were developed

by independent scientific studies. The standards include a substantial

safety margin designed to assure the safety of all persons, regardless

of age and health.

The exposure standard for wireless mobile phones employs a unit of

measurement known as the Specific Absorption Rate, or SAR. The SAR

limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using

standard operating positions accepted by the FCC with the phone trans-

mitting at its highest certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified power level, the

actual SAR level of the phone while operating can be well below the

maximum value. This is because the phone is designed to operate at

multiple power levels so as to use only the power required to reach the

network. In general, the closer you are to wireless base station antenna,

the lower the power output.

Before a phone model is available for sale to the public in the public, it

must be tested and certified to the FCC that it does not exceed the limit

established by the government-adopted requirement for safe exposure.

The tests are performed in positions and locations as required by the

FCC for each model.

For body-worn operation, this model has been tested and meets the FCC

USB Modem Introduction

can be found on the (FCC) web site: http://www.fcc.gov

sure guidelines.Additional information on Specific Absorption Rates (SAR)

RF exposure guidelines when used with the ZTE accessories supplied or

designated for this product. Use of other accessories may not ensure

compliance with FCC RF exposure guidelines. While there may be differ-

ences between the SAR levels of various phones and at various positions.

In all cases, products are designed to be within the guidelines.

FCC has granted an Equipment Authorization for this model phone with all

reported SAR levels evaluated as in compliance with the FCC RF expo-

1.4 System Requirements

The USB Modem supports any PC or MAC system using the USB 2.0

interface and operating systems listed below:

Operating System:Windows 2000 / XP / Vista / 7, and MAC OS X 10.

4 and above

Recommended Configuration:

CPU 1GHz Pentium or above

Hard Disk 20MB or above available

RAM 512M or above

The performance of the modem may be reduced if the configuration is

below the recommended requirement.

USB Modem Introduction

HSPA+/HSUPA/HSDPA/UMTS 850/900/1900/2100 MHz

Functions

MicroSD Capacity

Operating Range

HSPA+/HSUPA/HSDPA/UMTS/GSM/GPRS/EDGE

GSM/GPRS/EDGE 850/900/1800/1900 MHz

77mm x 28mm x 12mm

Approx. 30g

HSPA+ Mode up to 21.6Mbps

HSUPAMode up to 5.76Mbps

HSDPA Mode up to 7.2Mbps

UMTS Mode up to 384 Kbps

EDGE Mode up to 236.8Kbps

GPRS Mode up to 57.6Kbps

Resting 100mA rms

Max: 450mA rms

3G Mode: 250mW

2G Mode: 2W

USB Standard (2.0)

Compatible with PC and MacOS as listed

SMS service, data service, internet, applied

management, supports MicroSD

Up to 8GB

-10ºC to +60ºC

Networks

Frequency

Bands

Dimensions

Weight

Working Voltage

Current Consumption

Maximum Emitted

Power

Interface Type

Supported Systems

1.5 Technical Specifications

USB Modem Introduction

Data Rate

2Installation

2.1 Unpacking

Check the following articles are in the package: Modem, USB Extension

cable, Quick Start Guide and User Manual.

2.2 Software Installation

2.2.1 Insert the SIM Card into the Modem

The SIM card is the Subscriber Interface Module provided by your Ser-

vice Provider. Before using the modem make sure the SIM card supports

data services. Insert the SIM card as shown with the gold contacts

facing down and the beveled edge facing outwards of the device. Push

the SIM card in as far as it will go.

2.2.2 Connecting the Modem and computer

Before connecting the modem for the first time, uninstall all previous

versions of the software.

Insert the modem into an available port on your computer. Alternatively,

you may use the supplied USB cable to connect the modem to the computer.

Installation

10 Installation

In most cases the single cable should suffice. However, to increase the

power delivered to the modem, use the double USB cable if required

2.2.3 First Time Software Installation

After the modem is connected, your computer will launch the installation

application software automatically.

1. Select your language and press Next.

2. Click Next to continue.

3. Read the license agreement, select I accept the terms of the

license agreement and press Next.

4. Click Next to accept the default installation location or press Change

to specify your preferred path.

5. The wizard will take a few minutes to install software. Click Finish

to complete.

Notes

•If your security settings prevent Autorun from starting automatically,

you will have to start the process manually. Navigate to the CDROM

and double click the Autorun.exe file to start the software installation

•The application software only needs to be installed the first time the

modem is connected to your computer. After the software is installed

you will operate the modem as described in section 2.3.

2.3 Using your Modem

Insert your modem into an available USB port on your computer. Your

computer will launch the Connection Manager application automatically.

The modem will initialize and the main user interface will appear. When

the Standby icon appears in the System Tray, the modem is ready to

work normally.

Indice

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente

Zoom

Zoom 1070 Series Manuale utente

Aztech

Aztech HW831 Manuale utente