Zte MF971V Manuale utente

MF971V

Quick Start Guide

Getting to Know Your Device

Appearance

The following gure is for your reference only.

1. Power key

2. FUNC key

3. External antenna connector

4. LCD screen

5. External antenna connector

6. Charging/micro-USB jack

7. micro-SIM card slot and reset hole

Getting to Know Your Device

Indicators

When the device is powered on, the following icons

may be displayed on the LCD screen. For a de-

scription of the icons, refer to the following table.

Icon Description

Network signal strength

4G/3G/2G Network type

The user is in roaming status.

Connected to the Internet.

Connected to the Internet in the

Internet Wi-Fi mode.

New message(s)

Wi-Fi status and the number of

connected users

Battery level

Getting to Know Your Device

Connection Scenarios

The device allows multiple clients to surf on the

Internet at the same time. The following gures are

for your reference only.

A micro-SIM card can be used to access the

Internet.

1. Open the micro-SIM card slot cover, and install

a micro-SIM card to the micro-SIM card slot.

NOTE:

Do not remove the cover rudely, because it is con-

nected with the device.

WARNING!

To avoid damage to the device, do not use any oth-

er kind of SIM cards, or any non-standard micro-

SIM card cut from a SIM card. You can get a stan-

dard micro-SIM card from your service provider.

2. Close the micro-SIM card slot cover.

Installing the micro-SIM Card

Connecting to Your Device

Using Wi-Fi

1. Power on your device.

2. Ensure that your computer or other client de-

vices have enabled Wi-Fi, and search for avail-

able wireless networks.

NOTE:

Refer to your Wi-Fi-enabled client device manual

for further details on how to search for wireless net-

works. If you use a computer, you need to set your

computer to obtain an IP address automatically.

3. Select the Wi-Fi name (SSID) of your device,

and click Connect.

4. Enter the Wi-Fi password if necessary, and

click OK.

NOTE:

Refer to the chapter Getting to Know the Wi-Fi

SSID and Password to get the default Wi-Fi SSID

and password.

5. Wait until the client device is connected to your

device successfully.

Connecting to Your Device

Using a USB Cable

1. Connect a computer to your device with a USB

cable.

2. Power on your device. The operating system

detects and identies new hardware, and auto-

matically installs the software.

NOTE:

If the system does not automatically launch instal-

lation, you can Double-click the device installation

icon in My Computer to install the software.

3. Wait until the computer is connected to your

device successfully.

Getting to Know the Wi-Fi SSID and

Password

You can use the following methods to get the de-

fault Wi-Fi SSID and password.

• View the label on the device.

• Press the FUNC key to access the options

menu. Select Device Info and the Wi-Fi SSID

and password are displayed on the screen.

Logging in to the 4G Mobile Hotspot

Conguration Page

1. Ensure that the connection between your de-

vice and the client device is correct.

2. Launch the Internet browser and enter

http://192.168.0.1 or http://u.ztedevice.com

in the address bar.

3. Enter the password to log in to the 4G Mobile

Hotspot conguration page.

NOTE:

The default password is admin.

Changing the Wi-Fi SSID or Password

1. Log in to the 4G Mobile Hotspot conguration

page.

2. Select Settings below Wi-Fi and then click

Main SSID.

3. Change the Network Name (SSID) or the

Password in the Main SSID area.

4. Click Apply.

Accessing the Internet

After a client device is successfully connected to

your device, you can access the Internet in Auto-

matic or Manual mode. The default mode is Auto-

matic.

Mode Operation

Automatic

Your device is automatically connect-

ed to the Internet, and you can surf

on the Internet through the client.

Manual

1. Log in to the 4G Mobile Hotspot

conguration page.

2. Select Settings > Connection

Mode > Manual, and then click

Apply.

3. Click to back to the home

page, and click or .

You can also press the FUNC

key and select Network Connec-

tion. Select Yes or No.

NOTE:

To modify the parameters of your device, log in to

the 4G Mobile Hotspot conguration page.

Accessing the Internet

Altri manuali per MF971V

Indice

Altri manuali Zte Router di rete

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza