Zte MF971V Manuale utente

Altri manuali per MF971V

2

Indice

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente

1

MF971V

Quick Start Guide

ZTE CORPORATION

NO. 55, Hi-tech Road South, Shenzhen, P.R.China

Postcode: 518057

2

Getting to Know Your Device

Appearance

The following figure is for your reference only.

1. Power key

Press and hold for about 1.5 seconds to power on/off

your device.

Press and hold for about 8 seconds to restart your

device.

2. WPS key

Press and hold for 1.5 seconds to activate the WPS function.

3. Indicator light

4. micro-SIM card slot cover and reset hole

5. Charging/micro-USB jack

3

Getting to Know Your Device

Indicator lights

Indicator Status Description

Battery

Red solid /

blinking The battery is low. Please

charge the battery.

Green

blinking The battery is being

charged.

Green

solid The battery level is middle

or high.

Light off Your device is powered off

and not being charged

Wi-Fi

Blue solid Wi-Fi is active.

Blue

blinking WPS is active.

Light off Wi-Fi is off.

SMS

Blue solid You have unread messages.

Blue

blinking You have new messages or

the message storage is full.

Light off There is no unread message

or new message.

4

Network

Red The device is in error status.

The device is not

registered to the mobile

network.

There is no micro-SIM

card inserted.

There is no network

service available.

Green

solid The device is registered to

the 2G/3G mobile network.

Green

blinking The device is connected to

the 2G/3G mobile network

and data is being

transferred.

Blue solid The device is registered to

the 4G LTE network.

Blue

blinking The device is connected to

the 4G LTE network and

data is being transferred.

5

Getting to Know Your Device

Connection Scenarios

The device allows multiple clients to surf on the Internet at the

same time. The following figure is for your reference only.

A micro-SIM card can be used to access the Internet.

6

Installing the micro-SIM Card

1. Open the micro-SIM card slot cover.

NOTE:

Do not remove the cover rudely, because it is connected with the

device.

2. Install a micro-SIM card to the micro-SIM card slot.

WARNING!

To avoid damage to the device, do not use any other kind of SIM

cards, or any non-standard micro-SIM card cut from a SIM card.

You can get a standard micro-SIM card from your service

provider.

7

3. Close the micro-SIM card slot cover.

8

Connecting to Your Device

Using Wi-Fi

1. Power on your device.

2. Ensure that your computer or other client devices have

enabled Wi-Fi, and search for available wireless networks.

NOTE:

Refer to your Wi-Fi-enabled client device manual for further

details on how to search for wireless networks. If you use a

computer, you need to set your computer to obtain an IP

address automatically.

3. Select the Wi-Fi name (SSID) of your device, and click

Connect.

4. Enter the Wi-Fi password if necessary, and click OK.

NOTE:

Refer to the chapter Getting to Know the Wi-Fi SSID and

Password to get the default Wi-Fi SSID and password.

5. Wait until the client device is connected to your device

successfully.

Using a USB Cable

1. Connect a computer to your device with a USB cable.

2. Power on your device. The operating system detects and

identifies new hardware, and automatically installs the

software.

9

NOTE:

If the system does not automatically launch installation, you can

double-click the device installation icon in My Computer >

PERSONAL MODEM to install the software.

3. Wait until the computer is connected to your device

successfully.

10

Getting to Know the Wi-Fi SSID and

Password

You can view the label on the device to get the default Wi-Fi

SSID and password.